Professional Documents
Culture Documents
I2717PockRock Manual en V01
I2717PockRock Manual en V01
12 13 10 11
18
POCKROCK 6
9
7
15 14
Precautions
1 2 3 16
* PLEASE READ CAREFULLY BEFORE PROCEEDING *
Power Supply 1. PLAY/STOP button
Please connect the designated AC adapter to an AC outlet of Press this button to start/stop the drum machine
the correct voltage. 2. Patch button
Please be sure to use only an AC adapter which supplies 9V Press to enter/exit patch mode. Rotate DRUM/VALUE
DC, 300 mA, center minus. control to DR select preset patch
Unplug the AC power adapter when not using or during 3. Store button
electrical storms. Press to store current settings to a preset patch.
4. DRUM/VALUE control
Connections Press button to select drum machine parameters.
Always turn off the power of this and all other equipments Rotate to adjust parameter values. Hold to access tuner.
before connecting or disconnecting, this will help prevent 5. DRIVE
malfunction and / or damage to other devices. Also make Selects drive type
sure to disconnect all connection cables and the power cord 6. GAIN
before moving this unit. Adjusts the gain of the DRIVE model
Location 7. TONE
To avoid deformation, discoloration, or other serious Adjusts the brightness of the tone
damage, do not expose this unit to the following conditions: 8. MOD
Direct sunlight Rotate to select modulation effects and adjust the rate/depth
Heat sources 9. DLY/REV
Magnetic fields Rotate to select delay or reverb effects and adjust the delay
Extreme temperature or humidity time/reverb mix
Excessive dusty or dirty location 10.Cab.Sim.
High humidity or moisture Switch on/off speaker cabinet simulation
Strong vibration or shock 11.Power
Turn power on/off
Interference with other electrical devices 12.VOL
Radios and televisions placed nearby may experience Adjusts the output volume
reception interference. Operate this unit at a suitable 13.LCD SCREEN
distance from radios and televisions. Displays various information
14.INPUT
Cleaning Connect instrument using a standard 1/4" jack cable
Clean only with a soft, dry cloth. If necessary, slightly 15.OUTPUT
moisten the cloth. Do not use abrasive cleanser, cleaning Connect to the input of amplifier or other audio device using
alcohol, paint thinners, wax, solvents, cleaning fluids, or a standard 1/4" jack
chemical-impregnated wiping cloths. 16.Aux In
Handling Connect external devices such as mp3 players for audio
Do not apply excessive force to the switches or controls. playback
Do not let paper, metallic, or other objects into this unit. 17.PHONES
Take care not to drop the unit, and do not subject it to shock Headphone output
or excessive Pressure. 18.DC IN
Connect 9V DC power supply. 300mA centre pin negative.
Main Features
8 effects modules Detailed Operation
6 drive models
16 factory presets & 16 User presets MODES
40 Drum patterns
1/8" headphones output & 1/8" Aux in POCKROCK has 2 modes of operation. Press the Patch
button to toggle between these modes
powered by battery or power adapter
Power On
Power On
Connect a 9v DC centre pin negative power supply to the
Play MODE
DC IN or insert 2 x AAA batteries into the battery This is the default operating mode of POCKROCK after
compartment. Set the POWER switch to the On position powering on.
The LCD SCREEN will display "PL”
In this mode all parameter values will be equal to their
For installing batteries.
corresponding controls setings
DC IN
power switch
Specification
Guitar Input: 1/4” mono jack
Output:: 1/4” mono jack
Phones: 1/8” stereo jack
Aux In: 1/8” stereo jack
Power requirements: AC adapter 9V DC center
negative,or 2 AAA batteries
Dimensions: 128.5mm (W) × 84mm (D) × 45mm (H)
Weight: 160g
Accessories: Owner's Manual
www.ammoon.com