Professional Documents
Culture Documents
Bme Part A Test
Bme Part A Test
Draft saved
* Required
A 10 cm diameter jet of water strikes a curved vane with a velocity of 15 m/s. The
inlet angle of the vane is zero and the outlet angle is 150° measured with respect
to the impinging jet direction. Determine the force (kN) on the vane in x-direction
when the vane is stationary.
3.56
9.14
7.23
5.48
A jet of water with a velocity of 18 m/s impinges on a moving curved vane at 25°
to the direction of motion. The velocity of the vane is 10 m/s. The vane angle at
the outlet is 30°. Find the blade angle at inlet so that the water enters without
shock.
137.54
102.65
129.69
125.89
https://docs.google.com/forms/d/e/1FAIpQLSe_IFVH0vj-wnjjnQgpd4xLXo9nlDcRAZ1NHKGPdlIvZK2_BA/viewform 1/5
3/14/22, 12:45 PM L BME A10 CT-1 Dry Run
Roll No. *
2K21/A10/68
502.11
682.96
892.72
357.14
In a hydroelectric project, the available discharge is 60 m3/s with a net head of70
m. Assuming a turbine efficiency of 92% and a rotational speed of 300 rpm,
determine the least number of turbines of the same size and have a specific
speed of 275.
https://docs.google.com/forms/d/e/1FAIpQLSe_IFVH0vj-wnjjnQgpd4xLXo9nlDcRAZ1NHKGPdlIvZK2_BA/viewform 2/5
3/14/22, 12:45 PM L BME A10 CT-1 Dry Run
A Francis turbine has a guide-vane angle of 15° and its inlet flow is radial. The
flow velocity is 10.0 m/s and is constant. Considering the exit discharge as radial,
determine the peripheral velocity at inlet.
29.58
37.32
25.36
18.66
The following data are available for a Francis turbine: Peripheral velocity at inlet =
30 m/s. Whirl velocity at inlet= 50 m/s. Assuming a hydraulic efficiency of 90%
and zero whirl at the exit, determine the net head available to the turbine.
84.95
125.38
169.89
152.86
331
286
253
299
https://docs.google.com/forms/d/e/1FAIpQLSe_IFVH0vj-wnjjnQgpd4xLXo9nlDcRAZ1NHKGPdlIvZK2_BA/viewform 3/5
3/14/22, 12:45 PM L BME A10 CT-1 Dry Run
A free jet of water of area A and velocity V strikes a vertical plate normally. The
plate is moving with a velocity u in the direction of the jet. Obtain the value of the
ratio V/u for maximum efficiency of this power transmission system. What is the
value of corresponding maximum efficiency?
1/2
1/3
4768
5931
7832
3154
4256
4993
2496
3254
https://docs.google.com/forms/d/e/1FAIpQLSe_IFVH0vj-wnjjnQgpd4xLXo9nlDcRAZ1NHKGPdlIvZK2_BA/viewform 4/5
3/14/22, 12:45 PM L BME A10 CT-1 Dry Run
Name *
VIR GULATI
Page 1 of 1
This form was created inside of Delhi Technological University. Report Abuse
Forms
https://docs.google.com/forms/d/e/1FAIpQLSe_IFVH0vj-wnjjnQgpd4xLXo9nlDcRAZ1NHKGPdlIvZK2_BA/viewform 5/5