Professional Documents
Culture Documents
Etfe Presentation
Etfe Presentation
ETFE
SYSTEMS?
ETFE
ETFE (Ethylene Tetrafluoroethylene) is a fluoropolymer-based material.
Created by Dupont firm for the flying machine industry, it is an item that is utilized
as a part of present day engineering because of its light porousness and softness. It
is normally connected as 2 layers, 3 layers, as inflatable airbags, now and again as
single divider. ETFE material is thin and lightweight. Roughly 1% weight of glass,
with all the more light transmittance, self-cleaning, perceivability and simplicity of
use. The imperviousness to ETFE frameworks is extraordinarily expanded when air
blown frameworks are utilized.
www.tensaform.com 3
ETFE SYSTEM
ADVANTAGES
The heaviness of the 3-layer ETFE One wall has a light transmittance of the
swelling framework is roughly 2-3 kg/ ETFE around 85-90%. It provides bright
m2 with the interfacing aluminum. as outdoors indoors. Also light
This component has the favorable transmission level through the use of
position that it can not be contrasted films can be controlled partially spotty.
and glass. This element permits the
entry of expansive openings with a
lightweight transport framework. In
this way, the transporter gives a great
deal morepractical arrangements when FLEXIBLE
considered with the framework. SPECIAL
Since it doesn’t stick tidy on its UV, nearly 25 years due to resistance to
surface, it has a self cleaning capacity air pollution and environmental
even in next to no rain. Cleaning the conditions and has more life.
frameworks with rain water decreases
the cost of intermittent upkeep and
cleaning.
FIRE
RESISTANCE
SPECIAL DIN 4102 Class B1
ACOUSTIC EN 13501-1 Class Bs1,
d0 NFP 92-505 M2
ETFE films have acoustic transmittance NFPA 701 Pass
of 70%.
snow longwave
radiation
rain solar
radiation
wind heat emission
exhaust air
flow
radiational
inward air flow exchange of
surfaces
inward air
exchange condensation
inward air
supplyair exchange condensation
heat gain
www.tensaform.com 5
ETFE SYSTEM
TECHNICAL
INFORMATION
MATERIAL SPECIFICATIONS
Elongation DIN-EN-ISO-527-3 % 350 min. 350 min. 350 min. 350 min. 350 min.
10% Elongation Strength DIN-EN-ISO-527-3 MPa 18 min. 18 min. 18 min. 18 min. 18 min.
Tear Strength DIN-EN-1875-3 N/mm 400 min 400 min 400 min 400 min 400 min
Air Layer
www.tensaform.com 7
SYSTEM CONNECTION
THE DETAILS
With Span s
ETFE cushions, mounted on the carrier structure with special upgrading apparatus is fixed to
the aluminium prof. The inside or outside of the vent pipe connected to the pressure set on
cushion airflow upgrade and apparatus are provided to receive the forms prescribed inflatable
cushion is provided. Repelling birds on the aluminium profile according to the option wires can
be installed.
For the cutting of the formats which Measure precise placement of controls +-1mm accuracy ETFE film cutting is
are delivered by the shape and the is made to leave the material of the done
pneumatic stress qualities to be cutting template.
connected, ETFE movies are laid as
per the cnc machine.
COMBINATION
BONDING OF INTERNAL ROPES POCKET WELDING
Middle of the road holding is done ETFE the film (single wall applications) The ETFE film (single-wall applications)
by the shares given in the interfered inside pocket pasting the ropes used edge halatlar Tallinn to pass for widely
with formats. The parts are stuck all to increase the static strength. held cell paste operation.
together as indicated by the layout
numbers and the module estimate, in
order to shape the entire outlined.
The ETFE film (single wall, two wall, Module dimensions, size and The risk of fracture and tear Material
three-wall, four wall applications) packaging according to the state minimum to download then labeled
can be mounted on the aluminum assembly opening preparation is done. and packaged in the form of folding
profile special extrusion for module module ID will not be lost on them
The EPDM edge to be glued at the in a way of sorting and dispatch are
same time as the operation of all provided with maximum security.
layers of the films.
www.tensaform.com 9
ETFE FILM
ASSEMBLY
PROFILE LAYOUT COVER ASSEMBLY CONTROL
An aluminum profile is placed on the It is laid over the network and the The last state before the pneumatic
construction. cover is mounted. pressure system envisaged ETFE
Machinery and equipment will be Final checks are made before inflation. It starts to inflate.
installed.
Inflating operation is completed. Air pressure is balanced. The ready-made system is checked
for air leakage and delivered.
TECHNICAL
NOWOFLON ET - Architecture.pdf 0,22 MB
NOWOFLON_ET6235Z_100_natur.pdf 0,09 MB