Professional Documents
Culture Documents
Imagepilot: Startup Through Patient Registration Storage On Media
Imagepilot: Startup Through Patient Registration Storage On Media
ImagePilot
1 Startup through Patient Registration 2 Capturing CR Images through Image Processing 3 Storage on Media
1 Switch on PC power. 1
- Log-in screen of ImagePilot will be displayed following the OS startup Ensure that the viewer screen displayed on the screen Click [Write] button.
4
Input the Patient ID from the
4 keyboard, and press [Enter] key. Each click of [Rotate] button at the
upper left of the image will rotate the Shutdown
b) In the case of auto-ID issue: image by 90 degrees.
Click [Create ID] button. Each click of [Flip] button will switch 1 Click [X] located at the upper right corner
between flipped and unflipped. 1 of viewer or patient reception screen.
Rotate
5 Input various items for the Patient - When viewer screen is open with
[Modality] button selected, the
Information from the keyboard. Flip selection will be automatically
canceled.
- After the confirmation dialogue is
6 Click [Add Exam] button. displayed, OS desktop screen will be
3 After clicking [Window Level] button, displayed.
Contrast 1
- The patient information will be decreases dragging the mouse up/down or
" #$% &! !
registered in reception. right/left on the captured and '( ! !
Density Density selected image will allow adjustment $! $! !
7 Click [Perform Exam] button. increases decreases of density/contrast. $! !!
6 7 " #)!% &! !
- Viewer screen for the input patient will be '( ! !
- The relation between the drag
displayed. Contrast direction and the density/contrast $! $! ! (
increases
changes shown on the left can be set $! !!
[Process Data] button shall be used only using the User Tool.
when handling the data for the patient not 2 Click in sequence [Start] menu -> [Turn
visiting the institute. In addition to the adjustments described above, image adjustment, Off Computer] button -> [Turn Off] button.
addition of annotation or measurement can be implemented using the
Image Tool. - ImagePilot power will be shut down.
!
It is also possible to capture images from the modalities other than CR. Note: Refer to the ImagePilot Operation Manual for the operations other than those described in this guide.