Professional Documents
Culture Documents
Micro Electronics, Inc.: Micro-Strip® and Soft-Strip® Tool Resource Guide
Micro Electronics, Inc.: Micro-Strip® and Soft-Strip® Tool Resource Guide
Problems were that precision needed improvement; a Please feel free to call a
separate tool was required for each size of wire to be representative anytime with
stripped; and the blade wasn't supported during the any questions you may have.
stripping operation. This led the company to invent and
patent the highly precise Micro-Strip® stripping tool. Need to order replacement parts
including guides, blades, heating elements or other
President and General Manager, Gary Perrino, whose accessories?
family invented the Micro-Strip® tool, joined the company
in 1980, and has been responsible for many of the prod- Let Micro-Strip help you find the part number your
uct's improvements in recent years. looking for. Call 508-761-8960 for more information.
Micro-Strip®
stripping or jacket stripping by
referring to the tables enclosed. 1. Insert cable through fiber guide. Align
If necessary, install proper fiber end of cable with rule marking at desired
guide, fiber guide lock and strip length.
cutter blade set. 2. Close handles. Blade sets cut
2. Close handles together while blades cut almost through the insulation
STRIPPING PROCEDURE into jacket while holding handles closed, without ever touching the fiber/wire.
(BUFFERED OPTICAL FIBER flip latch bar down around pin. Release
USING MS-1-FS TOOL) handles to latched, semi-open position. Do
not reclose handles. Move hand up to grasp
1. Hold tool in one hand, fiber in head of tool. While other hand is holding
Micro-Strip®
the other. Keep handles in fully cable firmly, pull with a quick smooth
expanded position. Insert fiber motion. Flip latch off pin. Stripped jacket
through fiber guide until end will fall out through rear of channel when
lines up with markings to match handles are fully open.
desired strip length.
3. With handles closed, pull fiber/wire
or cable from tool. Always a
2. Squeeze handles closed. precision strip length. Fiber/wire
Cutter blades are now scoring is never nicked or damaged.
the buffer or coating. Note: Never leave tool with latch in locked
position. This can cause Delrin spring to take
set, preventing handles from opening fully.
3. While maintaining a slight When stripping hard, tough or thick jackets, it
pressure to keep the stripper is NOT necessary to use latch bar. Lock bar out
blades closed, withdraw fiber
Micro-Strip®
of the way by tightening the screw.
from tool, completing the
stripping process.
Use these two standard MS-1-FS tool with interchangeable cutter blades and MS-2-L tool with interchangeable cutter blades and
handles to strip buffered fiber fiber guides can mechanically strip buffered fiber up to fiber guides can mechanically strip jackets for
up to 900µm, or jacketed fiber 2300µm. 2.5mm, 3.0mm, and 3.5mm cable.
up to 3.5mm quickly and Cutter Blade Sets: 18 sizes for 80um to 1350µm fiber. Cutter Blade Sets: One standard size 0.054’ dia.
easily. Simply select and install Fiber Guides: 20 sizes, for 180um to 2360µm coatings. Fiber Guides: 3 sizes for 2.5mm, 3.0mm, and
the proper cutter blade sets, Fiber Guide Locks: Provided with cutter blade sets. 3.5mm jackets.
fiber guides and fiber guide Fiber Guide Locks: Provided with cutter blade sets.
locks. Or, if you prefer,
purchase Micro-Strip® tools Fiber-Guide Fiber-Guide
individually fitted for the fiber
of jacket diameter you specify.
Cutter blade sets and fiber
guides come pre-installed. Cutter Blades Cutter Blades
Fiber-Guide Lock Fiber-Guide Lock
1. From table, identify COMPLETE TOOLS AND REPLACEMENT BLADE SETS FOR OPTICAL FIBER FIBER GUIDE SELECTION
coating or cladding diam-
Fiber Cladding Diameter Proper Complete Tool Replacement Blade Color Fiber Coating Replacement
eter you wish to strip down to Expose Blade Cat. No. † Cutter Blade Code or Buffer Fiber Guide
to. Read across to Complete (µm) (in.) Dia. Set Cat. No.* Dia. (µm)to Strip Cat. No.▲
Tool Cat. No. up to 80 up to .0031 .0045 MS1-04S-__-FS MS1-RB-04S CLEAR up to 180 MS1-RT-07
85-120 .0033-.0047 .0055 MS1-05S -__-FS MS1-RB-05S LAVENDER 180-250 MS1-RT-10
125-135 .0049-.0053 .0063 MS1-06S-__-FS MS1-RB-06S PURPLE 250-343 MS1-RT-13
2. From Fiber Guide Selec- 125-175 .0049-.0068 .008 MS1-08S-__-FS MS1-RB-08S RED 343-407 MS1-RT-16
tion table, identify desired 180-230 .0070-.0090 .010 MS1-10S-__-FS MS1-RB-10S LIGHT BLUE 407-457 MS1-RT-18
235-280 .0092-.0110 .012 MS1-12S-__-FS MS1-RB-12S WHITE 457-533 MS1-RT-21
coating or buffer diameter MS1-RB-14S DARK GREEN
285-330 .0112-.0129 .014 MS1-14S-__-FS 533-635 MS1-RT-25
to learn Fiber Guide Cat. No. 335-380 .0131-.0149 .016 MS1-16S-__-FS MS1-RB-16S ORANGE 635-787 MS1-RT-31
Put 2-digit code in Complete 385-430 .0151-.0169 .018 MS1-18S-__-FS MS1-RB-18S YELLOW 787-889 MS1-RT-35
Tool Cat. No. space to 435-500 .0171-.0196 .021# MS1-21S-__-FS MS1-RB-21S ROYAL BLUE 889-1016 MS1-RT-40
505-550 .0198-.0216 .023 MS1-23S-__-FS MS1-RB-23S MAROON 1016-1168 MS1-RT-46
complete it. 555-600 .0218-.0236 .025 MS1-25S-__-FS MS1-RB-25S LIGHT GREEN 1168-1321 MS1-RT-52
605-680 .0238-.0267 .028## MS1-28S-__-FS MS1-RB-28S BLACK 1321-1397 MS1-RT-55
3. Order complete tool. 685-750 .0269-.0295 .031 MS1-31-__ MS1-RB-31S TAN 1397-1600 MS1-RT-63
755-830 .0297-.0326 .034 MS1-34-__ MS1-RB-34S PINK 1600-1702 MS1-RT-67
Proper cutter blade set and 835-900 .0328-.0354 .037 MS1-37-__ MS1-RB-37S GRAY 1702-1778 MS1-RT-70
fiber guide will be provided. 905-1050 .0356-.0413 .044 MS1-44-__ MS1-RB-44S DARK BROWN 1778-1930 MS1-RT-76
1055-1350 .0415-.0531 .054 MS1-54-__ MS1-RB-54S NATURAL 1930-2057 MS1-RT-81
2057-2184 MS1-RT-86
4. Order replacement cutter For best results use .0063 inch blade when removing 250µm coating.
2184-2362 MS1-RT-93
blade sets and fiber guides For best results use .0080 inch blade when removing 900µm buffer.
# For best results when stripping secondary buffer down to primary 250µm coating use blade size .021. ▲ Catalog numbers are for a single,
as needed. ## For best results when stripping secondary buffer down to primary 500µm coating use blade size .028. individually packaged fiber guide
† Includes tool individually boxed with cleaning tool, push tool and instructions. with integral size indicator disk.
* Catalog numbers are for two cutter blade sets packaged together with a matching fiber guide lock.
Each blade set consists of a pair of joined, matched blades which must be snapped apart prior to use.
Matched cutter blade sets are NOT interchangeable, and must only be used with their matching half.
1. From table, identify jacket COMPLETE TOOLS AND REPLACEMENT BLADE SETS FOR JACKET STRIPPING REPLACEMENT HANDLE ASSEMBLY
diameter you wish to strip.
Jacket Blade Complete Tool Replacement Blade Color Handle
Read across to Complete Diameter dia. Cat. No. †† Cutter Blade Code Assembly* Application
Tool Cat. No. (µm) (in.) Set Cat. No.*
Fiber coating/buffer
2.5 .098 .054 MS2-54S-D1 MS2-RB-54S NATURAL MS-1-FS stripping up to 2360µm
3.0 .118 .054 MS2-54S-D2 MS2-RB-54S NATURAL Jacket stripping
2. Order complete tool. 3.5 .137 .054 MS2-54S-D3 MS2-RB-54S NATURAL MS-2-L up to 3.5mm
Proper cutter blade set and
MS-1 and MS-2 components are not interchangeable. † Includes tool individually boxed with
jacket guide will be * Catalog are for two cutter blade sets packaged together with a matching fiber guide lock cleaning brush, push tool and instructions.
provided. Each blade set consists of a pair of joined, matched blades which must be snapped apart prior †† Catalog numbers are for single individually
to use. Matched cutter blade sets are NOT interchangeable, and must only be used with their packaged Jacket Guide (with integral size
matching half. indicator disk).
3. Order replacement cutter * Includes handle individually boxed with
blade sets and jacket guides cleaning brush, push tool and instructions.
Cutter blade set and fiber guide are NOT included.
as needed.
www.Micro-Strip.com
Soft-Strip®
install and connect AC adapter. heater oven to desired length. Be sure
Install proper cutter blade set, buffered fiber is flat in the oven channel.
fiber guide and fiber guide lock. Otherwise, heater oven movement will
cause fiber to buckle up and out of the
HEATER OVEN heating zone. 2. Close handles. Blade sets cut
Unit is activated when handles almost through the insulation,
are closed. Close handles only 2. Close handles completely. Blades are heater oven is also activated.
when stripping. Check heater precisely aligned for concentric scoring
operation by closing handles without cladding, core, or conductor
firmly for no longer than ten damage. Heater oven is automatically
seconds. Nose end of heater activated to start softening process.
Soft-Strip®
should be warm to the touch.
3. Keep handles closed (AA 10-20 seconds,
After stripping operation, 6V or AC adapter 4-8 seconds) for optimum
remove heater oven from tool softening. Then, begin to pull the fiber,
and clean with brush provided slowly increasing pull force until coating
3. With handles closed for 5-10 seconds,
(spring assembly in later models releases from the fiber. Remove the fiber
pull fiber/wire from tool. Always a
include automatic scrap from the tool with a smooth, even motion. precision strip length. Fiber/wire
ejector). Reinsert, making sure is never nicked or damaged.
that the heater oven is pushed Note: Heater unit heats continuously when
completely forward toward the handles are closed. Do not hold handles
blade area and snaps into place. closed for longer than 20 seconds for AA
The 2” heater oven area should battery units. 10 seconds for 6V battery/AC
adapter units, or overheating can damage the
be visible at front of tool so
Soft-Strip®
tool. Do not touch heater oven while in
operator can monitor position- operation. Allow to cool before removal and
ing and preheating of coating. cleaning.
UltraVersatile
Use these two standard handles to strip
buffered fiber up to 900µm, or 2 to 12
fiber ribbon quickly and easily. Simply Cutter Blade Set
select and install the proper cutter blade
sets, fiber guides and fiber guide locks.
Fiber-Guide Lock
4. Order replacement cutter blade sets ‘E’ - Encapsulated ‘B’ - Bonded ‘R’ - Ribbonized
and ribbon guides as needed. † Includes tool individually boxed with cleaning tool, push tool and instructions.
Note: Blades are color coded and matched to diameter and color of fiber guide lock. Replace or install fiber guide and
fiber guide lock as needed. Always test strip fiber after installing new blade set. Remove blades periodically and clean
with brush provided and alcohol.
K-2
K-1
MS-TK-1
MS-FO
MS-FO
Fiber Optic Fiber Optic A.W.G. Wire
Stripping Kit Stripping Kit Stripping Kit
This fiber optic stripping kit, This convenient three-step fiber This A.W.G. wire stripping kit,
MS-FOK-1, contains stripping tool, optic stripping kit, MS-FOK-2, MS-TK-1, is used for precision
blade and fiber guide components for contains Kevlar scissors and stripping of 18-32 gage fine wire. It
both outer jacket stripping (up to prefitted strippers for outer contains a standard stripping handle
3.5mm) and coating/buffer stripping jackets (up to 3.5mm), 900µm with a variety of blade and guide
(up to 900µm). It comes packaged in buffers and 250µm coatings. components for stripping a wide
an attractive metal case. range of solid or stranded wire.
MS-SK
Multi-Fiber Single-Fiber
Thermal Stripping Kit Thermal Stripping Kit
The MS-SK-1 kit contains the patented Soft-Strip® thermal The MS-SK-2 kit includes patented Soft-Strip® thermal stripper
stripper and components necessary for stripping the most and components necessary for stripping discrete fibers with
popular ribbon types including 2-12 fiber encapsulated, Cladding diameter up to 140µm and Coating/Buffer diameter up
bonded or ribbonized constructions. It is powered by an AC to 900µm. It is powered by an AC wall outlet adapter (order
wall outlet adapter (order separately). separately).
Additional Items, Accessories and Options
MS-RHM-2
MS-CB-2 (double ended)
Both of these useful brushes are for removing residue from
blade area normal to the stripping operation. MS-RHM-1 (for models MS-3B and MS-4B) Used with AA
battery powered thermal stripper only. 30mm maximum
COMPONENT REMOVAL AND INSERTION TOOL strip length.
MS-FO-90-DW For a wide cutting surface, the deluxe 90° MS-T3 (North American / Japan Shown)
Wedge Diamond Scribe is housed in an attractive retract-
able type metal casing.