Professional Documents
Culture Documents
Fulfl o Filter Bags: High-Quality, Consistent Fi Ltration Performance
Fulfl o Filter Bags: High-Quality, Consistent Fi Ltration Performance
75 |
Fulflo® Filter Bags Standard Bag
Flow Factors
SPECIFICATIONS Effective Removal Ratings Rating Flow
Maximum Recommended 0.5μm to 800μm (μm) Factors
Operating Conditions
Bag Media Selection 1 0.00083
Temperature: Mono-filament Mesh: 3 0.00059
Polyester: 275°F (136°C) Single strand nylon with retention ratings
Polypropylene: 200°F (94°C) from 100μm to 600μm 5 0.00044
Monofilament Nylon Mesh: 275°F (136°C) 10 0.00029
Nomex®: 425°F (220°C) Glazed Felt:
In polypropylene or polyester felts, the sur- 25 0.00017
Multifilament Polyester Mesh:
275°F (136°C) face fibers are melt bonded to one another, 50 0.00013
reducing the possibility of fiber migration
Flow Rate: (Per single length) 75 0.00008
Multi-filament Mesh:
Standard Bag: 80gpm (303 lpm) 100 0.00007
Strong fabric woven from twisted strands.
Change-out ΔP: 35psi (2.4bar) Particle retention ratings from 150μm to
Flow Rate and Pressure Drop Formulas
800μm Flow Rate (gpm) = Clean ΔP x Length Factor
Pressure: 70psid (4.8bar)
High Temperature Nomex® Viscosity x Flow Factor
Size
C1: 7.5˝ X 17.5˝ Clean ΔP = Flow Rate x Viscosity x Flow Factor
Standard Seal (no seal option specified)
Length Factor
C2: 7.5˝ X 31.5˝ C = Plastic Quik-Seal™ Ring
G1: 7˝ X 17.5˝ (polypropylene for P felt and polyester Notes:
G2: 7˝ X 31.5˝ for PE felt) 1. Clean ΔP is psi differential at start.
2. Viscosity is centistokes. Use Conversion Tables for other units.
G = Galvanized Steel Ring 3. Flow Factor is ΔP/GPM at 1cks for single length bag.
4. Length Factors convert flow or ΔP from single length bags.
Use length factor or 1 for single length and a factor of 2 for
double length.
Ordering Information
Polypropylene, Polyester Felt Bags
C — F G — Q
Bag Size Polypropylene Media Seal Options Bag Size Polypropylene Media Seal Options
3 3
5 5
P P
10 10
25 25
50 50
100 100
1 1
3 3
5 5
10 10
PE PE
25 25
50 50
75 75
100 100
200 200
Note:
The following apply to all bag media selections
• Use C-Style bags for Parker CB, FB, & SB housings
• Use G-Style bags for Parker E-Series Bag & competitor housings
| 76
Polyester Multi-Filament Bags
C PEMU — G PEMU — Q H
Bag Size Polyester Media Seal Options Bag Size Polyester Media Seal Options Other Options
300 300
400 400
800 800
C NOM — F G NOM — H
Bag Size Nomex Media Seal Options Bag Size Nomex Media Other Options
25 25
50 50
100 100
C MNO — G MNO — Q
Bag Size Nylon Media Seal Options Bag Size Nylon Media Seal Options
300 300
400 400
600 600
Note:
The following apply to all bag media selections
• Use C-Style bags for Parker CB, FB, & SB housings
• Use G-Style bags for Parker E-Series Bag & competitor housings
77 |
This page is intentionally blank.
www.parker.com/processfiltration