Professional Documents
Culture Documents
JIC37 Flare Fittings
JIC37 Flare Fittings
JIC37 Flare Fittings
Installation and Assembly 298 1420 - 45° Swivel Nut Elbow 315
1210 - Union Tee 301 6310 - BSP Positional 90° Elbow 317
10-40 BAR
1110 - Union 90° Elbow 302 1610 - SAE Positional 90° Elbow 318
1310 - Union Cross 302 4310 - Metric Positional 90° Elbow 319
1260 - NPT Male Branch Tee 303 6810 - BSP Positional Run Tee 320
1250 - NPT Male Run Tee 304 1810 - SAE Positional Run Tee 321
SAE 50 BAR
1140 - 90° NPT Male Elbow 305 4810 - Metric Positional Run Tee 321
1430 - 45° NPT Male Elbow 306 6820 - BSP Positional Branch Tee 322
1510 - SAE Male Hex Connector 307 4820 - Metric Positional Branch Tee 323
6010 - Male BSP Union 308 1820 - SAE Positional Branch Tee 323
SAE 3000 PSI
6030 - Swivel Female x BSP Male Connector 312 5010 - Hexagon Plug 326
SAE 6000 PSI
1560 - Swivel Female SAE Male Connector 313 900 - Swivel Cap 326
1
1030 - Bulkhead 313 1630 - BSP Gauge Adapor 327
1120 - 90° Bulkhead Elbow 314 800 - Union 1/4” BSP Female 327
DIN 350-400 BAR
SCHEDULE SERIE
SAE 3000 PSI
SCHEDULE SERIE
SAE 6000 PSI
page 301 page 301 page 302 page 302 page 303
1250 1140 1430 1510 6010
VALVES
page 304 page 305 page 306 page 307 page 308
4540 1040 6020 6030 1560
BITE TYPE
FITTINGS
page 309 page 310 page 311 page 312 page 313
1030 1120 1032 1130 1420
FLARE FITTINGS
SAE J514 JIC
page 313 page 314 page 314 page 315 page 315
1240 1230 6310 1610 4310
HOSE COUPLINGS
HOSES &
page 316 page 316 page 317 page 318 page 319
6810 1810 4810 6820 4820
ADAPTORS
page 320 page 321 page 321 page 322 page 323
1820 5020 500 200 5010
SOLUTIONS
SPECIAL
page 323 page 324 page 325 page 325 page 326
900 1630 800
MACHINES
SYSTEM
SAE J 514 (ISO 8434-2) General Information
CLAMPS
JIC 37° Flare Fittings According to DNV
VALVES
The max. allowable working pressure of basic JIC 37° flare fittings (as type approved by DNV) are as follows:
BITE TYPE
mm inch mm bar bar bar
FITTINGS
6 1/4” 1.5 430 430 600
8 5/16” 1.5 430 430 600
10 3/8” 1.5 430 430 600
12 1/2” 2.0 350 350 490
FLARE FITTINGS
SAE J514 JIC
16 5/8” 2.5 350 350 490
18 3/4” 2.5 350 350 490 297
20 - 2.5 350 350 490
22 7/8” 2.5 350 350 490
25 1” 3.0 250 250 420
HOSE COUPLINGS
30 - 4.0 250 250 420
HOSES &
38 1 1/2” 5.0 250 250 420
Temperature range: -40 to +90°C
The following O-ring materials shall be used:
• for gas-media AFLAS 100H/100S
• for other media Nitrile 70 shore
Special carbon steel and stainless steel (AISI 316) JIC Special Carbon steel and stainless steel (AISI 316) JIC
ADAPTORS
37° flare fittings without an o-ring may (according to 37° flare fittings with an o-ring may (according to the
the type approval from Det Norske Veritas) be used for type approval from Det Norske Veritas) be used for the
the following service: following service:
• Freshwater • Freshwater
SOLUTIONS
• Sanitary • Sanitary
• Hydraulic • Hydraulic
• Deluge systems
GS-FLANGE
Tube O.D.
Max. tube wall thickness Max. working pressure
mm inch (mm) (bar)
6 1/4 1.5 350
8 5/16 1.5 350
10 3/8 1.5 250
VALVES
30 - 3.0 125
32 1 1/4 3.0 125
38 1 1/2 3.0 100
The following presents the general principles of the assembly and installation of SAE J514 fittings and are thus not to be
298
construed as detailed and complete instruction. Note! The detailed assembly and installation instructions are available
from GS-Hydro upon request.
HOSE COUPLINGS
HOSES &
ADAPTORS
The pipe is first deburred inside and out. Shoot through two pellets with GS Jetcleaner.
SOLUTIONS
SPECIAL
MACHINES
Install nut and sleeve. Measure you have the right outside diameter and Flare tube end to recommended size (see Table 1 next page). Clean the
wallthickness of tube. flaring cone and the end of the tube with a clean cloth. Use oil on the flaring
INFORMATION
TECHNICAL
SYSTEM
SAE J 514 (ISO 8434-2) General Information
BITE TYPE
FITTINGS
FLARE FITTINGS
SAE J514 JIC
299
Bring the tube to installation site. Remove the plastic plug from the tube Clean the flared tube with clean cloth.
end.
HOSE COUPLINGS
HOSES &
ADAPTORS
Clean the JIC fittings with a clean cloth. Make sure the O-ring is installed in the recess of the JIC fittings.
SOLUTIONS
SPECIAL
MACHINES
Use oil on the nut, body and the flared tube end. For stainless steel use After hand tightening use a spanner to tighten up 1/4” to 3/4” turn. Make
INFORMATION
Molybdenium Disulphide or equal. up the nut fully. Do not wait till later to tighten up. The tube shall not rotate
TECHNICAL
duting tightening.
GS-FLANGE
Order Example
4540–12–20
ADAPTORS
When ordering please specify whether JIC 37° flare fittings with a Det Norske Veritas/NORSOK approval is
INFORMATION
required.
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Straight Union, Union Tee
BITE TYPE
FITTINGS
1010-08-08 23010012 23030016 1/2” 12 3/4”-16 40,4 17,7 22,2 0,060
1010-10-10 23010016 23030018 5/8” 14/15/16 7/8”-14 47,2 19,6 25,6 0,095
1010-12-12 23010020 23030020 3/4” 18/20 1 1/16”-12 53,5 22,3 28,6 0,140
1010-16-16 23010025 23030022 1” 25 1 5/16”-12 55,9 23,2 34,9 0,220
1010-20-20 23010030 23030024 1 1/4” 30/32 1 5/8”-12 61,6 24,7 44,5 0,365
FLARE FITTINGS
SAE J514 JIC
1010-24-24 23010032 23030028 1 1/2” 38 1 7/8”-12 69,7 27,9 50,8 0,520
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel. 301
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
Part No A B
SPECIAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
Part No A B
Inch MM UNF kg/pc
SPECIAL
St SS
1310-04-04-04-04 23010269 23030866 1/4” 6 7/16”-20 23,4 14,4 0,050
1310-05-05-05-05 23010270 23030867 5/16” 8 1/2”-20 24,9 14,4 0,075
1310-06-06-06-06 23010271 23030868 3/8” 10 9/16”-18 27,7 14,5 0,090
1310-08-08-08-08 23010272 23030869 1/2” 12 3/4”-16 32,5 17,7 0,185
1310-10-10-10-10 23010273 23030870 5/8” 14/15/16 7/8”-14 37,6 19,6 0,285
MACHINES
SYSTEM
SAE J 514 (ISO 8434-2) NPT Male Branch Tee
HOSE COUPLINGS
HOSES &
ADAPTORS
NPT Male Branch Tee - Part no. 1260
ID Code Tube Tube Thread Size Weight
Part No O.D. O.D. A B C D F
St SS UNF NPT kg/pc
Inch MM
1260-04-04-02 23010256 23030851 1/4” 6 7/16”-20 1/8” 27,7 28,5 14,4 12,7 7,1 0,040
1260-04-04-04 23010257 23030852 1/4” 6 7/16”-20 1/4” 27,7 28,5 14,4 12,7 7,1 0,040
SOLUTIONS
SPECIAL
1260-05-05-02 23010258 23030853 5/16” 8 1/2”-20 1/8” 27,7 28,5 14,4 12,7 7,1 0,050
1260-05-05-04 23010259 23030854 5/16” 8 1/2”-20 1/4” 27,7 28,5 14,4 12,7 7,1 0,050
1260-06-06-04 23010260 23030855 3/8” 10 9/16”-18 1/4” 29,9 31,7 14,5 12,7 10,3 0,070
1260-06-06-06 23010261 23030856 3/8” 10 9/16”-18 3/8” 29,9 31,7 14,5 12,7 10,3 0,070
1260-08-08-06 23010262 23030858 1/2” 12 3/4”-16 3/8” 32,5 38,1 17,7 15,9 13,5 0,165
1260-10-10-08 23010263 23030859 5/8” 14/15/16 7/8”-14 1/2” 37,6 38,1 19,6 15,9 13,5 0,250
MACHINES
1260-12-12-12 23010264 23030860 3/4” 18/20 1 1/16”-12 3/4” 42,9 41,1 22,4 15,9 18,2 0,345
1260-16-16-16 23010265 23030861 1” 25 1 5/16”-12 1” 46,7 50,8 23,5 20,6 23,8 0,655
1260-20-20-20 23010266 23030862 1 1/4” 30/32 1 5/8”-12 1 1/4” 53,1 61,1 24,7 25,4 31,7 1,030
1260-24-24-24 23010267 23030863 1 1/2” 38 1 7/8”-12 1 1/2” 59,9 67,8 27,9 23,8 38,1 1,440
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
304
HOSE COUPLINGS
HOSES &
ADAPTORS
1250-04-04-04 23010800 23031100 1/4” 6 7/16”-20 1/4” 28,5 27,7 14,4 12,7 7,1 0,040
1250-05-02-05 23010802 23031102 5/16” 8 1/2”-20 1/8” 28,5 27,7 14,4 12,7 7,1 0,050
1250-05-04-05 23010804 23031104 5/16” 8 1/2”-20 1/4” 28,5 27,7 14,4 12,7 7,1 0,050
1250-06-06-06 23010806 23031106 3/8” 10 9/16”-18 3/8” 31,7 29,9 14,5 12,7 10,3 0,070
1250-08-06-08 23010808 23031108 1/2” 12 3/4”-16 3/8” 38,1 32,5 17,7 15,9 13,5 0,165
1250-10-08-10 23010810 23031110 5/8” 14/15/16 7/8”-14 1/2” 38,1 37,6 19,6 15,9 13,5 0,250
MACHINES
1250-12-12-12 23010812 23031112 3/4” 18/20 1 1/16”-12 3/4” 41,1 42,9 22,4 15,9 18,2 0,345
1250-16-16-16 23010814 23031114 1” 25 1 5/16”-12 1” 50,8 46,7 23,5 20,6 23,8 0,655
1250-20-20-20 23010816 23031116 1 1/4” 30/32 1 5/8”-12 1 1/4” 61,1 53,1 24,7 25,4 31,7 1,030
1250-24-24-24 23010818 23031118 1 1/2” 38 1 7/8”-12 1 1/2” 67,8 59,9 27,9 23,8 38,1 1,440
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) 90° NPT Male Elbow
HOSE COUPLINGS
1140-04-06 23010814 23031204 1/4” 6 7/16”-20 3/8” 27,7 28,5 14,4 12,7 7,1 0,040
HOSES &
1140-04-08 23010816 23031206 1/4” 6 7/16”-20 1/2” 27,7 38,4 14,4 15,9 13,5 0,050
1140-05-02 23010818 23031208 5/16” 8 1/2”-20 1/8” 27,7 28,5 14,4 12,7 7,1 0,040
1140-05-04 23010820 23031210 5/16” 8 1/2”-20 1/2” 27,7 28,5 14,4 12,7 7,1 0,040
1140-06-02 23010822 23031212 3/8” 10 9/16”-18 1/8” 27,7 28,5 14,5 12,7 7,5 0,040
1140-06-04 23010824 23031214 3/8” 10 9/16”-18 1/4” 27,7 28,5 14,5 12,7 7,5 0,040
1140-06-06 23010826 23031216 3/8” 10 9/16”-18 3/8” 29,9 31,7 14,5 12,7 10,3 0,085
1140-06-08 23010828 23031218 3/8” 10 9/16”-18 1/2” 29,9 38,1 14,5 15,9 13,5 0,130 ADAPTORS
1140-08-04 23010830 23031220 1/2” 12 3/4”-16 1/4” 32,5 28,5 17,7 12,7 7,5 0,130
1140-08-06 23010832 23031222 1/2” 12 3/4”-16 3/8” 32,5 31,7 17,7 12,7 11,5 0,135
1140-08-08 23010834 23031224 1/2” 12 3/4”-16 1/2” 32,5 38,1 17,7 15,9 13,5 0,120
1140-08-12 23010836 23031226 1/2” 12 3/4”-16 3/4” 32,5 41,1 17,7 15,9 18,2 0,130
1140-10-06 23010838 23031228 5/8” 14/15/16 7/8”-14 3/8” 37,6 31,7 19,6 15,9 11,5 0,170
SOLUTIONS
SPECIAL
1140-10-08 23010840 23031230 5/8” 14/15/16 7/8”-14 1/2” 37,6 38,1 19,6 15,9 13,9 0,180
1140-10-12 23010842 23031232 5/8” 14/15/16 7/8”-14 3/4” 37,6 41,1 19,6 15,9 18,2 0,230
1140-12-08 23010844 23031234 3/4” 18/20 1 1/16”-12 1/2” 42,9 38,1 22,4 13,9 18,2 0,250
1140-12-12 23010846 23031236 3/4” 18/20 1 1/16”-12 3/4” 42,9 41,1 22,4 15,9 18,2 0,280
1140-16-12 23010848 23031238 1” 25 1 5/16”-12 3/4” 46,7 41,1 23,5 15,9 18,2 0,490
MACHINES
1140-16-16 23010850 23031240 1” 25 1 5/16”-12 1” 46,7 50,8 23,5 20,6 23,8 0,530
1140-20-16 23010852 23031242 1 1/4” 30/32 1 5/8”-12 1” 53,1 61,1 24,7 25,4 31,7 0,820
1140-20-20 23010854 23031244 1 1/4” 30/32 1 5/8”-12 1 1/4” 53,1 61,1 24,7 25,4 31,7 0,850
1140-24-24 23010856 23031246 1 1/2” 38 1 7/8”-12 1 1/2” 59,9 67,8 27,9 23,8 38,1 1,245
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
306
HOSE COUPLINGS
HOSES &
1430-08-06 23010890 23030310 1/2” 12 3/4”-16 3/8” 24,1 24,9 17,7 15,9 13,5 0,145
1430-08-08 23010892 23030312 1/2” 12 3/4”-16 1/2” 24,1 24,9 17,7 15,9 13,5 0,150
1430-08-12 23010894 23030314 1/2” 12 3/4”-16 3/4” 24,1 24,9 17,7 15,9 13,5 0,190
1430-10-08 23010896 23030316 5/8” 14/15/16 7/8”-14 1/2” 29,7 28,2 19,6 15,9 13,5 0,205
1430-10-12 23010898 23030318 5/8” 14/15/16 7/8”-14 3/4” 29,7 28,2 19,6 15,9 13,5 0,230
1430-12-08 23010900 23030320 3/4” 18/20 1 1/16”-12 1/2” 30,5 32,5 22,4 15,9 18,2 0,250
MACHINES
1430-12-12 23010902 23030322 3/4” 18/20 1 1/16”-12 3/4” 30,5 32,5 22,4 15,9 18,2 0,290
1430-16-16 23010904 23030324 1” 25 1 5/16”-12 1” 37,6 37,3 23,5 20,6 23,8 0,565
1430-20-20 23010906 23030326 1 1/4” 30/32 1 5/8”-12 1 1/4” 42,4 40,4 24,7 25,4 31,7 0,885
1430-24-24 23010908 23030328 1 1/2” 38 1 7/8”-12 1 1/2” 45,1 45,2 27,9 23,8 38,1 1,285
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) SAE Male Hex Connector
HOSE COUPLINGS
St SS UNF1 UNF2 kg/pc
Inch MM
HOSES &
1510-04-04 23010920 23032340 1/4” 6 7/16”-20 7/16”-20 30,7 14,3 9,3 4,4 14,3 0,020
1510-04-05 23010922 23032342 1/4” 6 7/16”-20 1/2”-20 30,7 14,3 9,3 4,4 14,3 0,020
1510-04-06 23010924 23032344 1/4” 6 7/16”-20 9/16”-18 31,2 14,3 10,1 7,5 14,3 0,020
1510-05-05 23010926 230323446 5/16” 8 1/2”-20 1/2”-20 31,2 14,3 9,3 5,9 14,3 0,020
1510-06-04 23010928 23032348 3/8” 10 9/16”-18 7/16”-20 32,7 14,5 10,1 7,5 18,1 0,035
1510-06-06 23010930 23032350 3/8” 10 9/16”-18 9/16”-18 32,7 14,5 10,1 7,5 18,1 0,035
ADAPTORS
1510-06-08 23010932 23032352 3/8” 10 9/16”-18 3/4”-16 32,7 14,5 10,1 9,5 18,1 0,035
1510-08-08 23010934 23032354 1/2” 12 3/4”-16 3/4”-16 36,9 17,1 11,2 9,9 22,2 0,065
1510-08-10 23010936 23032356 1/2” 12 3/4”-16 7/8”-14 37,8 17,1 12,7 12,3 22,2 0,080
1510-08-12 23010938 23032358 1/2” 12 3/4”-16 1 1/16”-12 41,1 17,1 15,2 15,5 22,2 0,110
1510-10-08 23010940 23032360 5/8” 14/15/16 7/8”-14 3/4”-16 42,6 19,6 11,2 9,9 25,6 0,090
1510-10-10 23010942 23032362 5/8” 14/15/16 7/8”-14 7/8”-14 43,4 19,6 12,7 12,3 25,6 0,095
1510-10-12 23010944 23032364 5/8” 14/15/16 7/8”-14 1 1/16”-12 45,9 19,6 18,7 15,5 25,6 0,120
SOLUTIONS
SPECIAL
1510-12-08 23010946 23032366 3/4” 18/20 1 1/16”-12 3/4”-16 46,7 22,3 16,2 9,9 31,7 0,120
1510-12-10 23010948 23032368 3/4” 18/20 1 1/16”-12 7/8”-14 48,3 22,3 12,7 12,3 31,7 0,140
1510-12-12 23010960 23032370 3/4” 18/20 1 1/16”-12 1 1/16”-12 50,2 22,3 15,2 15,5 31,7 0,155
1510-12-16 23010962 23032372 3/4” 18/20 1 1/16”-12 1 5/16”-12 50,2 22,3 15,2 15,5 31,7 0,170
1510-16-12 23010964 23032374 1” 25 1 5/16”-12 1 1/16”-12 50,8 23,5 15,2 21,4 38,1 0,210
MACHINES
1510-16-16 23010966 23032376 1” 25 1 5/16”-12 1 5/16”-12 50,8 23,5 15,2 21,4 38,1 0,235
1510-16-20 23010968 23032378 1” 25 1 5/16”-12 1 5/8”-12 50,8 23,5 15,2 27,4 38,1 0,280
1510-20-20 23010970 23032380 1 1/4” 30/32 1 5/8”-12 1 5/8”-12 59,9 24,7 15,2 27,4 50,8 0,430
1510-24-24 23010972 23032382 1 1/2” 38 1 7/8”-12 1 7/8”-12 64,4 27,9 15,2 33,3 56,4 0,620
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
6010-04-02 230104 23030798 1/4” 6 7/16”-20 1/8” 31,9 10,5 14,3 4,3 14,3 0,020
6010-04-04 230104 23030800 1/4” 6 7/16”-20 1/4” 33,7 11,1 14,3 4,7 19,1 0,035
6010-04-06 230104 23030799 1/4” 6 7/16”-20 3/8” 37,1 12,5 14,3 7,9 22,2 0,045
6010-04-08 230104 230308001 1/4” 6 7/16”-20 1/2” 42,3 15,1 14,3 11,1 28,6 0,100
6010-05-02 230104 23030801 5/16” 8 1/2”-20 1/8” 31,9 10,5 14,3 3,5 14,3 0,020
FLARE FITTINGS
6010-05-04 230104 23030802 5/16” 8 1/2”-20 1/4” 33,5 11,1 14,3 5,9 19,1 0,035
SAE J514 JIC
6010-05-06 230104 23030803 5/16” 8 1/2”-20 3/8” 37,4 12,5 14,3 7,9 22,2 0,055
308
6010-06-02 230104 230308032 3/8” 10 9/16”-18 1/8” 32,8 18,5 14,5 3,5 15,9 0,025
6010-06-04 23010500 230308031 3/8” 10 9/16”-18 1/4” 33,6 11,1 14,5 7,5 19,1 0,035
6010-06-06 23010502 23030804 3/8” 10 9/16”-18 3/8” 36,4 11,4 14,5 7,5 22,2 0,055
6010-06-08 23010504 230308041 3/8” 10 9/16”-18 1/2” 42,5 15,1 14,5 11,1 28,6 0,110
HOSE COUPLINGS
6010-08-04 23010505 23030805 1/2” 12 3/4”-16 1/4” 36,2 11,1 17,1 7,9 22,2 0,050
HOSES &
6010-08-06 23010506 23030806 1/2” 12 3/4”-16 3/8” 37,4 11,4 17,1 9,9 22,2 0,060
6010-08-08 23010508 23030810 1/2” 12 3/4”-16 1/2” 45,1 15,1 17,1 9,9 28,6 0,115
6010-08-12 23010509 230308100 1/2” 12 3/4”-16 3/4” 48,4 16,3 17,1 16,6 31,7 0,155
6010-10-06 23010510 23030811 5/8” 14/15/16 7/8”-14 3/8” 42,6 12,5 19,6 7,9 25,6 0,080
6010-10-08 23010511 23030812 5/8” 14/15/16 7/8”-14 1/2” 47,2 14,9 19,6 12,3 28,6 0,115
ADAPTORS
6010-10-12 23010512 23030814 5/8” 14/15/16 7/8”-14 3/4” 50,8 16,3 19,6 16,6 31,7 0,155
6010-10-16 23010513 230308140 5/8” 14/15/16 7/8”-14 1” 53,6 19,1 19,6 22,2 31,7 0,170
6010-12-06 23010515 230308141 3/4” 18/20 1 1/16”-12 3/8” 47,3 12,5 22,3 7,9 28,6 0,120
6010-12-08 23010514 23030815 3/4” 18/20 1 1/16”-12 1/2” 49,8 14,9 22,3 11,1 28,6 0,130
6010-12-12 23010516 23030816 3/4” 18/20 1 1/16”-12 3/4” 51,2 16,3 22,3 15,5 31,8 0,160
6010-12-16 23010517 23030818 3/4” 18/20 1 1/16”-12 1” 56,6 19,1 22,4 22,2 41,3 0,260
SOLUTIONS
SPECIAL
6010-16-08 23010519 23030821 1” 25 1 5/16”-12 1/2” 52,3 14,9 23,5 11,1 34,9 0,210
6010-16-12 23010518 23030822 1” 25 1 5/16”-12 3/4” 52,3 16,3 23,5 15,5 34,9 0,200
6010-16-16 23010520 23030824 1” 25 1 5/16”-12 1” 58,3 19,1 23,5 21,4 41,3 0,300
6010-16-20 23010521 23030825 1” 25 1 5/16”-12 1 1/4” 62,1 21,4 23,5 28,6 50,8 0,440
6010-20-16 23010522 23030826 1 1/4” 30/32 1 5/8”-12 1” 59,5 19,1 24,7 22,2 44,4 0,335
MACHINES
6010-20-20 23010524 23030827 1 1/4” 30/32 1 5/8”-12 1 1/4” 63,1 21,4 24,7 27,4 50,8 0,505
6010-20-24 23010523 23030828 1 1/4” 30/32 1 5/8”-12 1 1/2” 64,2 22,5 24,7 33,3 56,4 0,560
6010-24-20 23010526 23030830 1 1/2” 38 1 7/8”-12 1 1/4” 66,3 21,4 27,9 28,6 50,8 0,495
6010-24-24 23010525 23030832 1 1/2” 38 1 7/8”-12 1 1/2” 67,4 22,5 27,9 33,3 56,4 0,620
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Male Metric Union
HOSE COUPLINGS
Male Metric Union - Part no. 4540
HOSES &
ID Code Tube Tube Thread Size
Weight
Part No O.D. O.D. A B C E Hex
St SS UNF M=Metric kg/pc
Inch MM
4540-04-10 23011000 23032400 1/4” 6 7/16”-20 10 x 1,0 30,7 8,1 14,3 4,4 15,9 0,025
4540-04-12 23011002 23032402 1/4” 6 7/16”-20 12 x 1,5 34,7 12,1 14,3 5,9 15,9 0,030
ADAPTORS
4540-05-12 23011004 23032404 5/16” 8 1/2”-20 12 x 1,5 34,7 12,1 14,3 5,9 19,1 0,030
4540-05-14 23011006 23032406 5/16” 8 1/2”-20 14 x 1,5 34,7 12,1 14,3 6,5 19,1 0,030
4540-06-12 23011008 23032408 3/8” 10 9/16”-18 12 x 1,5 34,7 12,1 14,5 5,9 19,1 0,030
4540-06-14 23011010 23032410 3/8” 10 9/16”-18 14 x 1,5 34,8 12,1 14,5 6,5 19,1 0,035
4540-06-16 23011012 23032412 3/8” 10 9/16”-18 16 x 1,5 37,9 12,1 14,5 7,9 19,1 0,035
4540-08-16 23011014 23032414 1/2” 12 3/4”-16 16 x 1,5 37,9 12,1 17,1 7,9 22,2 0,030
4540-08-18 23011016 23032416 1/2” 12 3/4”-16 18 x 1,5 45,6 12,1 17,1 8,3 22,2 0,030
SOLUTIONS
SPECIAL
4540-10-18 23011018 23032418 5/8” 14/15/16 7/8”-14 18 x 1,5 45,6 14,1 19,6 8,3 28,6 0,105
4540-10-20 23011020 23032420 5/8” 14/15/16 7/8”-14 20 x 1,5 45,6 14,1 19,6 10,7 28,6 0,100
4540-10-22 23011022 23032422 5/8” 14/15/16 7/8”-14 22 x 1,5 45,6 14,1 19,6 12,3 28,6 0,100
4540-12-22 23011024 23032424 3/4” 18/20 1 1/16”-12 22 x 1,5 47,7 16,1 22,3 12,3 31,7 0,140
4540-12-27 23011026 23032426 3/4” 18/20 1 1/16”-12 27 x 2,0 47,7 16,1 22,3 19,1 31,7 0,150
MACHINES
4540-16-27 23011028 23032428 1” 25 1 5/16”-12 27 x 2,0 55,7 16,1 23,5 19,1 41,1 0,240
4540-16-33 23011030 23032430 1” 25 1 5/16”-12 33 x 2,0 55,7 16,1 23,5 21,4 41,1 0,250
4540-20-42 23011032 23032432 1 1/4” 30/32 1 5/8”-12 42 x 2,0 59,7 16,1 24,7 27,4 50,8 0,420
4540-24-48 23011034 23032434 1 1/2” 38 1 7/8”-12 48 x 2,0 60,9 16,1 27,9 33,3 56,2 0,620
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
1040-05-04 23011106 23032456 5/16” 8 1/2”-20 1/4” 33,4 12,7 14,4 7,5 15,9 0,025
1040-06-02 23011108 23032458 3/8” 10 9/16”-18 1/8” 30,4 9,5 14,5 4,7 15,9 0,025
HOSES &
1040-06-04 23011110 23032460 3/8” 10 9/16”-18 1/4” 33,5 12,7 14,5 7,5 15,9 0,030
1040-06-06 23011112 23032462 3/8” 10 9/16”-18 3/8” 33,5 12,7 14,5 10,3 18,1 0,030
1040-06-08 23011114 23032464 3/8” 10 9/16”-18 1/2” 38,3 15,9 14,5 13,4 22,2 0,050
1040-08-04 23011116 23032466 1/2” 12 3/4”-16 1/4” 37,6 12,7 17,1 7,2 22,2 0,055
1040-08-06 23011118 23032468 1/2” 12 3/4”-16 3/8” 36,1 12,7 17,1 9,9 22,2 0,055
ADAPTORS
1040-08-08 23011120 23032470 1/2” 12 3/4”-16 1/2” 39,3 15,9 17,1 13,4 22,2 0,060
1040-08-12 23011122 23032472 1/2” 12 3/4”-16 3/4” 44,1 17,5 17,1 18,3 28,6 0,105
1040-10-04 23011124 23032474 5/8” 14/15/16 7/8”-14 1/4” 40,3 12,7 19,6 7,2 25,6 0,070
1040-10-06 23011126 23032476 5/8” 14/15/16 7/8”-14 3/8” 40,3 12,7 19,6 10,3 25,6 0,075
1040-10-08 23011128 23032478 5/8” 14/15/16 7/8”-14 1/2” 43,4 15,9 19,6 12,3 25,6 0,090
1040-10-12 23011130 23032480 5/8” 14/15/16 7/8”-14 3/4” 46,6 19,1 19,6 18,3 28,6 0,095
SOLUTIONS
SPECIAL
1040-12-08 23011132 23032482 3/4” 18/20 1 1/16”-12 1/2” 47,7 15,7 22,3 12,7 28,6 0,115
1040-12-12 23011134 23032484 3/4” 18/20 1 1/16”-12 3/4” 51,1 19,1 22,3 18,3 28,6 0,125
1040-12-16 23011136 23032486 3/4” 18/20 1 1/16”-12 1” 52,5 28,6 22,3 23,8 34,9 0,170
1040-16-12 23011138 23032488 1” 25 1 5/16”-12 3/4” 50,5 15,9 23,5 19,1 34,9 0,170
1040-16-16 23011140 23032490 1” 25 1 5/16”-12 1” 58,1 23,8 23,5 23,8 34,9 0,300
MACHINES
1040-20-16 23011142 23032492 1 1/4” 30/32 1 5/8”-12 1” 60,7 23,8 24,7 23,8 44,4 0,310
1040-20-20 23011144 23032494 1 1/4” 30/32 1 5/8”-12 1 1/4” 60,7 23,8 24,7 31,7 44,4 0,320
1040-24-24 23011146 23032496 1 1/2” 38 1 7/8”-12 1 1/2” 64,1 22,2 27,9 33,3 50,8 0,510
1040-32-32 23011148 23032498 2” 50 2 1/2”-12 2” 79,0 26,4 34,0 44,6 65,0 0,860
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Female BSP Hexagon Connector
HOSE COUPLINGS
HOSES &
Female BSP Hexagon Connector - Part no. 6020
ID Code Tube Tube Thread Size
Weight
Part No O.D. O.D. A B Hex
UNF G=BSP kg/pc
Inch MM
6020-04-02 23011150 23032500 1/4” 6 7/16”-20 1/8” 35,2 14,3 19,1 0,040
6020-04-04 23011152 23032502 1/4” 6 7/16”-20 1/4” 35,2 14,3 19,1 0,040
ADAPTORS
6020-05-02 23011154 23032504 5/16” 8 1/2”-20 1/8” 35,2 14,3 19,1 0,040
6020-05-04 23011156 23032506 5/16” 8 1/2”-20 1/4” 35,2 14,3 19,1 0,045
6020-06-04 23011158 23032508 3/8” 10 9/16”-18 1/4” 38,3 14,5 19,1 0,045
6020-06-06 23011160 23032510 3/8” 10 9/16”-18 3/8” 38,3 14,5 22,2 0,060
6020-06-08 23011162 23032512 3/8” 10 9/16”-18 1/2” 38,3 14,5 28,6 0,070
6020-08-04 23011164 23032514 1/2” 12 3/4”-16 1/4” 46,1 17,1 22,2 0,120
6020-08-06 23011166 23032516 1/2” 12 3/4”-16 3/8” 46,1 17,1 22,2 0,125
SOLUTIONS
SPECIAL
6020-08-08 23011168 23032518 1/2” 12 3/4”-16 1/2” 46,1 17,1 28,6 0,130
6020-10-08 23011170 23032520 5/8” 14/15/16 7/8”-14 1/2” 48,6 19,6 28,6 0,135
6020-12-08 23011172 23032522 3/4” 18/20 1 1/16”-12 1/2” 53,3 22,3 28,6 0,180
6020-12-12 23011174 23032524 3/4” 18/20 1 1/16”-12 3/4” 53,3 22,3 34,9 0,200
6020-16-16 23011176 23032526 1” 25 1 5/16”-12 1” 56,3 23,5 41,3 0,275
MACHINES
6020-20-16 23011178 23032528 1 1/4” 30/32 1 5/8”-12 1” 64,6 24,7 50,8 0,410
6020-20-20 23011180 23032530 1 1/2” 30/32 1 5/8”-12 1 1/4” 64,6 24,7 50,8 0,480
6020-24-20 23011182 23032532 1 1/2” 38 1 7/8”-12 1 1/4” 69,2 27,9 50,3 0,680
6020-24-24 23011184 23032534 1 1/2” 38 1 7/8”-12 1 1/2” 69,2 27,9 60,3 0,730
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
312
6030-08-06 23010547 23030900 1/2” 12 3/4”-16 3/8” 38,6 14,9 12,7 11,1 10,7 28,6 23,4 0,075
6030-08-08 23010548 230309001 1/2” 12 3/4”-16 1/2” 38,6 14,9 12,9 11,1 13,7 28,6 28,6 0,110
6030-10-06 23010549 23030901 5/8” 14/15/16 7/8”-14 3/8” 38,8 14,9 12,9 11,1 13,7 28,6 28,6 0,110
6030-10-08 23010550 23030902 5/8” 14/15/16 7/8”-14 1/2” 38,8 14,9 12,9 11,1 13,7 28,6 28,6 0,130
6030-10-12 23010551 23030846 5/8” 15/15/16 7/8”-14 3/4” 40,2 16,3 14,9 16,6 13,7 28,6 31,7 0,150
6030-12-08 230105511 23030903 3/4” 18/20 1 1/16”-12 1/2” 43,8 14,9 14,9 11,1 14,2 31,7 28,6 0,180
SOLUTIONS
SPECIAL
6030-12-12 23010552 23030904 3/4” 18/20 1 1/16”-12 3/4” 43,8 16,3 14,9 16,6 14,2 31,7 31,7 0,190
6030-12-16 23010553 23030905 3/4” 18/20 1 1/16”-12 1” 49,3 19,1 14,9 22,2 14,2 31,7 38,1 0,210
6030-16-12 23010554 23030907 1” 25 1 5/16”-12 3/4” 49,3 16,2 14,9 16,6 16,4 41,3 31,7 0,280
6030-16-16 23010556 23030906 1” 25 1 5/16”-12 1” 54,1 21,4 14,9 28,6 16,4 41,3 38,1 0,305
6030-16-20 23010557 23030909 1” 25 1 5/16”-12 1 1/4” 49,3 19,1 14,9 22,2 16,4 41,3 38,1 0,305
MACHINES
6030-20-16 23010558 23030911 1 1/4” 30/32 1 5/8”-12 1” 54,1 19,1 15,7 22,2 15,9 50,8 38,1 0,420
6030-20-20 230105581 23030908 1 1/4” 30/32 1 5/8”-12 1 1/4” 54,1 21,4 15,7 28,6 15,9 50,8 50,8 0,520
6030-24-20 230105583 23030912 1 1/2” 38 1 7/8”-12 1 1/4” 56,1 21,4 16,5 28,6 15,9 56,4 50,8 0,620
6030-24-24 230105582 23030910 1 1/2” 38 1 7/8”-12 1 1/2” 56,1 22,5 16,5 33,3 20,1 56,4 56,4 0,695
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Swivel Female x SAE Male Conn., Bulkhead
VALVES
ID Code Tube Tube Thread Size
Part No O.D. O.D. A B C D E Hex1 Hex2 Weight
St SS UNF1 UNF2 kg/pc
Inch MM
1560-04-04 23011760 23031760 1/4” 6 7/16”-20 7/16”-20 24,7 9,3 8,4 3,9 9,8 14,3 15,9 0,040
1560-05-05 23011762 23031762 5/16” 8 1/2”-20 1/2”-20 24,7 9,3 10,6 3,9 8,5 14,3 18,1 0,050
1560-06-06 23011764 23031764 3/8” 10 9/16”-18 9/16”-18 28,6 10,1 10,4 7,5 9,4 18,1 18,1 0,070
BITE TYPE
FITTINGS
1560-08-08 23011766 23031766 1/2” 12 3/4”-16 3/4”-16 32,6 11,2 12,7 9,9 10,7 22,2 23,4 0,075
1560-10-10 23011768 23031768 5/8” 7/8”-14 7/8”-14 36,4 12,7 12,9 12,3 13,7 25,6 28,6 0,140
1560-12-12 23011770 23031770 3/4” 18/20 1 1/16”-12 1 1/16”-12 42,9 15,2 14,9 15,5 14,2 31,7 31,7 0,190
1560-16-16 23011772 23031772 1” 25 1 5/16”-12 1 5/16”-12 42,9 15,2 14,9 21,4 16,4 38,1 38,1 0,305
1560-20-20 23011774 23031774 1 1/4” 30/32 1 5/8”-12 1 5/8”-12 50,8 15,2 15,7 26,9 15,9 50,8 50,8 0,520
FLARE FITTINGS
SAE J514 JIC
1560-24-24 23011776 23031776 1 1/2” 38 1 7/8”-12 1 7/8”-12 53,1 15,2 16,5 33,3 20,1 56,4 56,4 0,695
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No) 313
HOSE COUPLINGS
HOSES &
ADAPTORS
Part No A B C Hex
SPECIAL
1030-12-12 23010058 23030106 3/4” 18/20 1 1/16”-12 77,4 44,4 22,3 34,9 0,270
1030-16-16 23010060 23030110 1” 25 1 5/16”-12 79,4 44,9 23,2 41,3 0,390
1030-20-20 23010062 23030111 1 1/4” 30/32 1 5/8”-12 84,2 46,2 24,7 47,3 0,600
1030-24-24 23010064 23030112 1 1/2” 38 1 7/8”-12 89,4 46,5 27,9 56,4 0,805
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
1120-08-08 23010180 23030251 1/2” 12 3/4”-16 35,3 54,3 17,1 32,3 25,6 0,205
1120-10-10 23010182 23030252 5/8” 14/15/16 7/8”-14 40,3 61,4 19,6 38,9 28,6 0,300
1120-12-12 23010184 23030256 3/4” 18/20 1 1/16”-12 45,9 68,6 22,3 40,1 34,9 0,360
1120-16-16 23010186 23030258 1” 25 1 5/16”-12 50,1 71,8 23,2 40,2 41,3 0,765
1120-20-20 23010187 23030260 1 1/4” 30/32 1 5/8”-12 55,1 79,2 24,7 40,9 47,3 0,955
FLARE FITTINGS
SAE J514 JIC
1120-24-24 23010190 23030262 1 1/2” 38 1 7/8”-12 59,4 86,9 27,9 41,1 56,4 1,510
314 O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
Part No A B C
SPECIAL
1032-12-12 23010103 23030158 3/4” 18/20 1 1/16”-12 32,9 22,3 31,9 0,295
1032-16-16 23010107 23030160 1” 25 1 5/16”-12 40,1 23,2 34,9 0,405
1032-20-20 23010111 23030162 1 1/4” 30/32 1 5/8”-12 45,9 24,7 45,1 0,735
1032-24-24 23010118 23030164 1 1/2” 38 1 7/8”-12 61,9 27,9 50,1 0,960
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) 90° Swivel nut Elbow, 45° Swivel Elbow
BITE TYPE
FITTINGS
1130-08-08 23010194 23030300 1/2” 12 3/4”-16 32,5 25,8 17,7 10,7 23,4 0,155
1130-10-10 23010195 23030304 5/8” 14/15/16 7/8”-14 37,6 29,1 19,6 13,7 28,6 0,225
1130-12-12 23010196 23030308 3/4” 18/20 1 1/16”-12 42,9 31,5 22,4 14,2 31,7 0,310
1130-16-16 23010197 23030309 1” 25 1 5/16”-12 46,7 36,6 23,5 16,4 38,1 0,590
1130-20-20 23010198 23030310 1 1/4” 30/32 1 5/8”-12 53,8 44,4 24,7 15,9 50,8 1,040
FLARE FITTINGS
SAE J514 JIC
1130-24-24 23010199 23030312 1 1/2” 38 1 7/8”-12 59,9 46,6 27,9 20,1 56,4 1,380
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel. 315
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
Part No A B C E Hex
SPECIAL
1420-12-12 2301062 23030046 3/4” 18/20 1 1/16”-12 32,5 38,1 22,4 14,2 31,7 0,235
1420-16-16 2301063 23030048 1” 25 1 5/16”-12 37,5 44,4 23,5 16,4 38,1 0,465
1420-20-20 2301064 23030050 1 1/4” 30/32 1 5/8”-12 40,4 51,6 24,7 15,9 50,8 0,800
1420-24-24 2301065 23030052 1 1/2” 38 1 7/8”-12 45,2 57,2 27,9 20,1 56,4 0,995
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
Swivel Branch Tee, Swivel Run Tee SAE J 514 (ISO 8434-2)
TUBES & PIPES
CLAMPS
1240-08-08-08 23010250 23030380 1/2” 12 3/4”-16 32,5 25,8 17,7 10,7 23,4 0,180
1240-10-10-10 23010251 23030381 5/8” 14/15/16 7/8”-14 37,6 29,1 19,6 13,7 28,6 0,275
1240-12-12-12 23010252 23030382 3/4” 18/20 1 1/16”-12 42,9 31,5 22,4 14,2 31,7 0,370
1240-16-16-16 23010253 23030383 1” 25 1 5/16”-12 46,7 36,6 23,5 16,4 38,1 0,680
1240-20-20-20 23010254 23030384 1 1/4” 30/32 1 5/8”-12 53,8 44,4 24,7 15,9 50,8 1,155
FLARE FITTINGS
SAE J514 JIC
1240-24-24-24 23010255 23030385 1 1/2” 38 1 7/8”-12 59,9 46,6 27,9 20,1 56,4 1,570
316 O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
Part No A B C E Hex
SPECIAL
1230-12-12-12 23010234 23030372 3/4” 18/20 1 1/16”-12 42,9 31,5 22,4 14,2 31,7 0,370
1230-16-16-16 23010236 23030373 1” 25 1 5/16”-12 46,7 36,6 23,5 16,4 38,1 0,680
1230-20-20-20 23010238 23030374 1 1/4” 30/32 1 5/8”-12 53,8 44,4 24,7 15,9 50,8 1,155
1230-24-24-24 23010240 23030375 1 1/2” 38 1 7/8”-12 59,9 46,6 27,9 20,1 56,4 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) BSP Positional 90° Elbow
FLARE FITTINGS
ID Code Thread Size
HOSE COUPLINGS
6310-05-04 23010564 23030998 5/16” 8 1/2”-20 1/4” 27,7 33,2 14,3 5,1 19,1 0,080
HOSES &
6310-05-06 23010562 23030997 5/16” 8 1/2”-20 3/8” 27,7 33,2 14,3 5,1 19,1 0,080
6310-06-04 23010565 230309991 3/8” 10 9/16”-18 1/4” 27,7 33,2 14,5 8,1 22,2 0,090
6310-06-06 23010566 23030999 3/8” 10 9/16”-18 3/8” 29,9 38,6 14,5 8,1 22,2 0,120
6310-06-08 23010567 23031010 3/8” 10 9/16”-18 1/2” 29,9 38,6 14,5 11,1 28,6 0,100
6310-08-04 23010568 23031012 1/2” 12 3/4”-16 1/4” 32,5 38,6 17,1 5,1 19,12 0,130
6310-08-06 23010569 230301000 1/2” 12 3/4”-16 3/8” 32,5 38,6 17,1 8,1 22,2 0,165
6310-08-08 23010570 23031013 1/2” 12 3/4”-16 1/2” 35,3 44,4 17,1 11,1 28,6 0,200 ADAPTORS
6310-08-12 23010571 23031014 1/2” 12 3/4”-16 3/4” 35,3 44,4 17,1 16,6 35,1 0,250
6310-10-04 23010572 23031016 5/8” 14/15/16 7/8”-14 1/4” 37,6 44,4 19,6 5,1 19,1 0,230
6310-10-06 23010573 23031018 5/8” 14/15/16 7/8”-14 3/8” 37,6 44,4 19,6 8,1 22,2 0,240
6310-10-08 23010574 230301001 5/8” 14/15/16 7/8”-14 1/2” 37,6 44,7 19,6 11,1 28,6 0,245
SOLUTIONS
6310-10-12 23010575 23031020 5/8” 14/15/16 7/8”-14 3/4” 37,6 50,8 19,6 16,6 35,1 0,270
SPECIAL
6310-12-08 23010576 23031022 3/4” 18/20 1 1/16”-12 1/2” 42,9 50,8 22,3 11,1 28,6 0,320
6310-12-12 23010585 230310019 3/4” 18/20 1 1/16”-12 3/4” 42,9 50,8 22,3 16,6 35,1 0,365
6310-12-16 23010586 23031024 3/4” 18/20 1 1/16”-12 1” 42,9 56,9 22,3 22,2 44,4 0,400
6310-16-12 23010587 23031026 1” 25 1 5/16”-12 3/4” 42,9 56,9 23,5 16,6 35,1 0,610
6310-16-16 23010588 23031028 1” 25 1 5/16”-12 1” 46,7 56,9 23,5 22,2 44,4 0,640
MACHINES
6310-16-20 23010589 23031030 1” 25 1 5/16”-12 1 1/4” 46,7 56,9 23,5 28,6 50,8 0,710
6310-20-16 23010577 23031002 1 1/4” 30/32 1 5/16”-12 1” 46,7 65,1 24,7 28,6 50,8 0,980
6310-20-20 23010578 23031032 1 1/4” 30/32 1 5/8”-12 1 1/4” 53,1 65,1 24,7 22,2 44,4 0,910
6310-24-24 23010590 23031034 1 1/2” 38 1 7/8”-12 1 1/2” 59,9 73,1 27,9 33,3 63,5 1,510
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
318
HOSE COUPLINGS
HOSES &
1610-04-04 23011800 2303012 1/4” 6 7/16”-20 7/16”-20 23,7 25,4 14,3 4,4 18,1 0,030
1610-04-06 23011801 2303013 1/4” 6 7/16”-20 9/16”-18 23,7 25,4 14,3 7,5 22,2 0,035
1610-05-05 23011802 2303014 5/16” 8 1/2”-20 1/2”-20 27,7 25,4 14,3 4,4 18,1 0,055
1610-06-06 23011803 2303015 3/8” 10 9/16”-18 9/16”-18 29,9 32,5 14,5 7,5 22,2 0,055
1610-06-08 23011804 2303016 3/8” 10 9/16”-18 3/4”-16 29,9 32,5 14,5 9,9 25,6 0,060
1610-08-08 23011805 2303018 1/2” 12 3/4”-16 3/4”-16 32,5 37,6 17,1 9,9 25,6 0,115
1610-08-10 23011806 2303020 1/2” 12 3/4”-16 7/8”-14 32,5 37,6 17,1 12,3 28,6 0,150
SOLUTIONS
SPECIAL
1610-10-08 23011807 2303022 5/8” 14/15/16 7/8”-14 3/4”-16 36,8 43,2 19,6 9,9 25,6 0,160
1610-10-10 23011808 2303024 5/8” 14/15/16 7/8”-14 7/8”-14 36,8 43,2 19,6 12,3 28,6 0,165
1610-12-10 23011809 2303026 3/4” 18/20 1 1/16”-12 7/8”-14 41,4 50,1 22,3 12,3 28,6 0,310
1610-12-12 23011810 2303028 3/4” 18/20 1 1/16”-12 1 1/16”-12 41,4 50,1 22,3 15,5 34,9 0,365
1610-12-16 23011811 2303030 3/4” 18/20 1 1/16”-12 1 5/16”-12 41,4 50,1 22,3 21,4 41,3 0,380
MACHINES
1610-16-12 23011812 2303031 1” 25 1 5/16”-12 1 1/16”-12 46,7 51,3 23,5 19,5 34,9 0,610
1610-16-16 23011813 2303032 1” 25 1 5/16”-12 1 5/16”-12 46,7 51,3 23,5 21,4 41,3 0,640
1610-20-20 23011814 2303033 1 1/4” 30/32 1 5/8”-12 1 5/8”-12 53,1 57,9 24,7 27,4 50,8 0,980
1610-24-24 23011815 2303034 1 1/2” 38 1 7/8”-12 1 7/8”-12 59,2 60,7 27,9 33,3 56,4 1,510
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Metric Positional 90° Elbow
HOSE COUPLINGS
HOSES &
Metric Positional 90° Elbow - Part no. 4310
ID Code Tube O.D. Tube O.D. Thread Size Weight
Part No A B C E Hex
St SS Inch MM UNF M=Metric kg/pc
4310-04-10 23011820 23031200 1/4” 6 7/16”-20 10 x 1,0 23,7 25,4 14,3 4,7 15,9 0,030
ADAPTORS
4310-04-12 23011821 23031202 1/4” 6 7/16”-20 12 x 1,5 23,7 25,4 14,3 4,7 18,1 0,030
4310-04-14 23011822 23031204 1/4” 6 7/16”-20 14 x 1,5 23,7 25,4 14,3 7,2 19,1 0,035
4310-05-12 23011823 23031206 5/16” 8 1/2”-20 12 x 1,5 27,7 33,1 14,3 4,7 18,1 0,040
4310-05-14 23011824 23031208 5/16” 8 1/2”-20 14 x 1,5 27,7 33,1 14,3 7,2 19,1 0,050
4310-06-14 23011825 23031210 3/8” 10 9/16”-18 14 x 1,5 27,7 33,1 14,5 7,2 19,1 0,550
4310-06-16 23011826 23031212 3/8” 10 9/16”-18 16 x 1,5 27,7 33,1 14,5 7,9 19,1 0,800
SOLUTIONS
4310-08-16 23011827 23031214 1/2” 12 3/4”-16 16 x 1,5 32,5 38,6 17,1 7,9 19,1 0,100
SPECIAL
4310-08-18 23011828 23031216 1/2” 12 3/4”-16 18 x 1,5 32,5 38,6 17,1 8,3 22,2 0,110
4310-10-18 23011830 23031218 5/8” 14/15/16 7/8”-14 18 x 1,5 36,8 42,5 19,6 8,3 22,2 0,150
4310-10-22 23011831 23031220 5/8” 14/15/16 7/8”-14 22 x 1,5 36,8 42,5 19,6 12,3 27,1 0,165
4310-12-22 23011832 23031222 3/4” 18/20 1 1/16”-12 22 x 1,5 42,9 51,5 22,3 12,3 27,1 0,270
4310-12-27 23011833 23031224 3/4” 18/20 1 1/16”-12 27 x 1,5 42,9 51,5 22,3 18,9 34,9 0,285
MACHINES
4310-16-27 23011834 23031226 1” 25 1 5/16”-12 27 x 1,5 46,1 53,2 23,5 18,9 34,9 0,410
4310-16-33 23011835 23031228 1” 25 1 5/16”-12 33 x 2,0 46,1 53,2 23,5 21,4 38,1 0,415
4310-20-42 23011836 23031230 1 1/4” 30/32 1 5/8”-12 42 x 2,0 52,3 58,1 24,7 27,4 48,1 0,980
4310-24-48 23011837 23031232 1 1/2” 38 1 7/8”-12 48 x 2,0 60,2 74,6 27,9 33,3 63,5 1,510
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
320
HOSE COUPLINGS
HOSES &
6810-06-04-06 23010595 23032010 3/8” 10 9/16”-18 1/4” 26,9 31,8 14,5 5,1 19,1 0,085
SPECIAL
6810-06-06-06 23010596 23032012 3/8” 10 9/16”-18 3/8” 26,9 31,8 14,5 8,1 22,2 0,085
6810-08-06-08 23010597 23032014 1/2” 12 3/4”-16 3/8” 31,8 36,8 17,1 11,1 28,6 0,180
6810-08-08-08 23010598 23032016 1/2” 12 3/4”-16 1/2” 31,8 36,8 17,1 11,1 28,6 0,180
6810-10-08-10 23010599 23032018 5/8” 7/8”-14 1/2” 36,8 43,2 19,6 11,1 28,6 0,275
6810-12-12-12 23010600 23032020 3/4” 18/20 1 1/16”-12 3/4” 42,2 49,3 22,3 16,6 35,1 0,370
MACHINES
6810-16-16-16 23010601 23032022 1” 25 1 5/16”-12 1” 46,1 52,1 23,5 22,2 44,4 0,680
6810-20-16-20 23010602 23032024 1 1/4” 30/32 1 5/8”-12 1” 52,3 57,2 24,7 28,6 50,8 1,155
6810-20-20-20 23010603 23032026 1 1/4” 30/32 1 5/8”-12 1 1/4” 52,3 57,2 24,7 22,2 44,4 1,100
6810-24-24-24 23010604 23032028 1 1/2” 38 1 7/8”-12 1 1/2” 59,2 60,7 27,9 33,3 63,5 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) SAE/Metric Positional Run Tee
VALVES
ID Code Tube Tube Thread Size
Weight
Part No O.D. O.D. A B C E Hex
St SS UNF1 UNF2 kg/pc
Inch MM
1810-04-04-04 23012100 23032100 1/4” 6 7/16”-20 7/16”-20 22,6 26,2 14,3 4,4 18,1 0,055
1810-05-05-05 23012102 23032102 5/16” 8 1/2”-20 1/2”-20 24,1 28,7 14,3 4,4 18,1 0,085
1810-06-06-06 23012104 23032104 3/8” 10 9/16”-18 9/16”-18 26,9 31,8 14,5 7,5 22,2 0,085
BITE TYPE
FITTINGS
1810-08-08-08 23012106 23032106 1/2” 12 3/4”-16 3/4”-16 31,8 36,8 17,1 9,9 25,6 0,180
1810-10-10-10 23012108 23032108 5/8” 14/15/16 7/8”-14 7/8”-14 36,8 43,2 19,6 12,3 28,6 0,275
1810-12-12-12 23012110 23032110 3/4” 18/20 1 1/16”-12 1 1/16”-12 42,2 49,2 22,3 15,5 34,9 0,370
1810-16-16-16 23012112 23032112 1” 25 1 5/16”-12 1 5/16”-12 46,1 52,1 23,5 21,4 41,3 0,680
1810-20-20-20 23012114 23032114 1 1/4” 30/32 1 5/8”-12 1 5/8”-12 52,3 57,2 24,7 27,4 50,8 1,155
FLARE FITTINGS
SAE J514 JIC
1810-24-24-24 23012116 23032116 1 1/2” 38 1 7/8”-12 1 7/8”-12 59,2 60,7 27,9 33,3 56,4 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel. 321
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
St SS Inch MM
4810-04-10-04 23012140 23032140 1/4” 6 7/16”-20 10 x 1,0 22,6 26,2 14,3 4,7 15,9 0,050
4810-05-12-05 23012142 23032142 5/16” 8 1/2”-20 12 x 1,5 24,1 28,7 14,3 4,7 18,1 0,085
4810-06-14-06 23012144 23032144 3/8” 10 9/16”-18 14 x 1,5 26,9 31,8 14,5 7,2 19,1 0,085
4810-08-16-08 23012146 23032146 1/2” 12 3/4”-16 16 x 1,5 31,8 36,8 17,1 7,9 19,1 0,180
4810-10-22-10 23012148 23032148 5/8” 14/15/16 7/8”-14 22 x 1,5 36,8 43,2 19,6 12,3 27,1 0,275
MACHINES
4810-12-27-12 23012150 23032150 3/4” 18/20 1 1/16”-12 27 x 2,0 42,2 49,2 22,3 18,9 34,9 0,370
4810-16-33-16 23012152 23032152 1” 25 1 5/16”-12 33 x 2,0 46,1 52,1 23,5 21,4 38,1 0,680
4810-20-42-20 23012154 23032154 1 1/4” 30/32 1 5/8”-12 42 x 2,0 52,3 57,2 24,7 27,4 48,1 1,155
4810-24-48-24 23012156 23032156 1 1/2” 38 1 7/8”-12 48 x 2,0 59,2 60,7 27,9 33,3 63,5 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
322
HOSE COUPLINGS
HOSES &
ADAPTORS
6820-05-05-04 23012202 23032202 5/16” 8 1/2”-20 1/4” 24,1 28,7 14,3 5,1 19,1 0,085
6820-06-06-04 23012204 23032204 3/8” 10 9/16”-18 1/4” 26,9 31,8 14,5 5,1 19,1 0,085
6820-06-06-06 23012206 23032206 3/8” 10 9/16”-18 3/8” 26,9 31,8 14,5 8,1 22,2 0,085
6820-08-06-06 23012208 23032208 1/2” 12 3/4”-16 3/8” 31,8 36,8 17,1 11,1 28,6 0,180
6820-10-10-08 23012210 23032210 5/8” 14/15/16 7/8”-14 1/2” 36,8 43,2 19,6 11,1 28,6 0,275
MACHINES
6820-12-12-12 23012212 23032212 3/4” 18/20 1 1/16”-12 3/4” 42,2 49,3 22,3 16,6 35,1 0,370
6820-16-16-16 23012214 23032214 1” 25 1 5/16”-12 1” 46,1 52,1 23,5 22,2 44,4 0,680
6820-20-20-20 23012216 23032216 1 1/4” 30/32 1 5/8”-12 1 1/4” 52,3 57,2 24,7 28,6 50,8 1,155
6820-24-24-24 23012218 23032218 1 1/2” 38 1 7/8”-12 1 1/2” 59,2 60,7 27,9 33,3 63,5 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Positional Branch Tees
VALVES
ID Code Tube Tube Thread Size
Weight
Part No O.D. O.D. A B C E Hex
St SS UNF M=Metric kg/pc
Inch MM
4820-04-04-10 23012240 23032240 1/4” 6 7/16”-20 10 x 1,0 22,6 26,2 14,3 4,7 15,9 0,050
4820-05-05-12 23012242 23032242 5/16” 8 1/2”-20 12 x 1,5 24,1 28,7 14,3 4,7 18,1 0,085
4820-06-06-14 23012244 23032244 3/8” 10 9/16”-18 14 x 1,5 26,9 31,8 14,5 7,2 19,1 0,085
BITE TYPE
FITTINGS
4820-08-08-16 23012246 23032246 1/2” 12 3/4”-16 16 x 1,5 31,8 36,8 17,1 7,9 19,1 0,180
4820-10-10-22 23012248 23032248 5/8” 14/15/16 7/8”-14 22 x 1,5 36,8 43,2 19,6 12,3 27,1 0,275
4820-12-12-27 23012250 23032250 3/4” 18/20 1 1/16”-12 27 x 2,0 42,2 49,2 22,3 18,9 34,9 0,370
4820-16-16-33 23012252 23032252 1” 25 1 5/16”-12 33 x 2,0 46,1 52,1 23,5 21,4 38,1 0,680
4820-20-20-42 23012254 23032254 1 1/4” 30/32 1 5/8”-12 42 x 2,0 52,3 57,2 24,7 27,4 48,1 1,155
FLARE FITTINGS
SAE J514 JIC
4820-24-24-48 23012256 23032256 1 1/2” 38 1 7/8”-12 48 x 2,0 59,2 60,7 27,9 33,3 63,5 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel. 323
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS
Inch MM
1820-04-04-04 23012280 23032280 1/4” 6 7/16”-20 7/16”-20 22,6 26,2 14,3 4,4 18,1 0,050
1820-05-05-05 23012282 23032282 5/16” 8 1/2”-20 1/2”-20 24,1 28,7 14,3 4,4 18,1 0,085
1820-06-06-06 23012284 23032284 3/8” 10 9/16”-18 9/16”-18 26,9 31,8 14,5 7,5 22,2 0,085
1820-08-08-08 23012286 23032286 1/2” 12 3/4”-16 3/4”-16 31,8 36,8 17,1 9,9 25,6 0,180
1820-10-10-10 23012288 23032288 5/8” 14/15/16 7/8”-14 7/8”-14 36,8 43,2 19,6 12,3 28,6 0,275
MACHINES
1820-12-12-12 23012290 23032290 3/4” 18/20 1 1/16”-12 1 1/16”-12 42,2 49,2 22,3 15,5 34,9 0,370
1820-16-16-16 23012292 23032292 1” 25 1 5/16”-12 1 5/16”-12 46,1 52,1 23,5 21,4 41,3 0,680
1820-20-20-20 23012294 23032294 1 1/4” 30/32 1 5/8”-12 1 5/8”-12 52,3 57,2 24,7 27,4 50,8 1,155
1820-24-24-24 23012296 23032296 1 1/2” 38 1 7/8”-12 1 7/8”-12 59,2 60,7 27,9 33,3 56,4 1,570
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
INFORMATION
TECHNICAL
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
GS-FLANGE
5020-06-04 23010448 23030702 3/8” x 1/4” 10 x 06 9/16”-18 7/16”-20 26,2 14,3 0 0,010
5020-06-05* 23010450 23030704 3/8” x 5/16” 10 x 08 9/16”-18 1/2”-20 33,7 14,3 18,1 0,035
324
5020-08-04 230104501 23030706 1/2” x 1/4” 12 x 06 3/4”-16 7/16”-20 26,2 14,3 0 0,020
5020-08-05 23010451 23030708 1/2” x 5/16” 12 x 08 3/4”-16 1/2”-20 26,2 14,3 0 0,020
5020-08-06 23010452 23030710 1/2” x 3/8” 12 x 10 3/4”-16 9/16”-18 26,3 14,5 0 0,020
5020-10-04 23010444 23030711 5/8” x 1/4” 14/15/16 x 06 7/8”-14 7/16”-20 26,4 14,3 0 0,025
HOSE COUPLINGS
5020-10-05 230104525 23030712 5/8” x 5/16” 14/15/16 x 08 7/8”-14 1/2”-20 26,4 14,3 0 0,025
HOSES &
5020-10-06 230104526 23030714 5/8” x 3/8” 14/15/16 x 10 7/8”-14 9/16”-18 28,2 14,5 0 0,030
5020-10-08* 23010453 23030716 5/8” x 1/2” 14/15/16 x 12 7/8”-14 3/4”-16 36,2 17,1 28,6 0,080
5020-12-04 23010442 23030717 3/4” x 1/2” 18/20 x 06 1 1/16”-12 7/16”-20 29,8 14,3 0 0,035
5020-12-05 23010440 23030718 3/4” x 5/16” 18/20 x 08 1 1/16”-12 1/2”-20 29,8 14,3 0 0,040
5020-12-06 23010438 23030720 3/4” x 3/8” 18/20 x 10 1 1/16”-12 9/16”-18 30,1 14,5 0 0,045
ADAPTORS
5020-12-08 230104535 23030721 3/4” x 1/4” 18/20 x 12 1 1/16”-12 3/4”-16 33,3 17,1 0 0,055
5020-12-10* 23010454 23030722 3/4” x 5/8” 18/20 x 14/15/16 1 1/16”-12 7/8”-14 45,1 19,6 31,7 0,130
5020-16-06 23010436 23030724 1” x 3/8” 25 x 10 1 5/16”-12 9/16”-18 30,4 14,5 0 0,080
5020-16-08 23010455 23030726 1” x 1/2” 25 x 12 1 5/16”-12 3/4”-16 35,6 17,1 0 0,085
5020-16-10 230104555 23030728 1 x 5/8” 25 x 14/15/16 1 5/16”-12 7/8”-14 37,5 19,6 0 0,090
5020-16-12 23010456 23030730 1” x 3/4” 25 x 18/20 1 5/16”-12 1 1/16”-12 40,2 22,3 0 0,100
SOLUTIONS
SPECIAL
5020-20-08 23010434 230307308 1 1/4” x 1/2” 30/32 x 12 1 5/8”-12 3/4”-16 34,2 17,1 0 0,210
5020-20-10 23010458 230307309 1 1/4” x 5/8” 30/32 x 14/15/16 1 5/8”-12 1 7/8”-14 37,9 19,6 0 0,215
5020-20-12 23010460 23030731 1 1/4” x 3/4” 30/32 x 18/20 1 5/8”-12 1 1/16”-12 40,6 22,3 0 0,125
5020-20-16 23010462 23030732 1 1/4” x 1” 30/32 x 25 1 5/8”-12 1 5/16”-12 41,8 23,5 0 0,155
5020-24-08 23010461 23030733 1 1/2” x 1/2” 38 x 12 1 7/8”-12 3/4”-16 38,1 17,1 0 0,190
MACHINES
5020-24-10 23010463 23030734 1 1/2” x 5/8” 38 x 14/15/16 1 7/8”-12 7/8”-14 40,0 19,6 0 0,190
5020-24-12 23010464 23030735 1 1/2” x 3/4” 38 x 18/20 1 7/8”-12 1 1/16”-12 42,3 22,3 0 0,200
5020-24-16 23010466 23030736 1 1/2” x 1” 38 x 25 1 7/8”-12 1 5/16”-12 43,2 23,5 0 0,200
5020-24-20 23010468 23030738 1 1/2” x 1 1/4” 38 x 30/32 1 7/8”-12 1 5/8”-12 44,3 24,7 0 0,235
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel. *=Type 2
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) Sleeve, Nut
VALVES
500-06 23010360 23030550 6 10,9 0,002
500-08 23010362 23030552 8 11,7 0,003
500-10 23010364 23030554 10 13,2 0,004
500-12 23010366 23030556 12 14,7 0,007
500-15 23010367 23030557 15 17,3 0,011
BITE TYPE
FITTINGS
500-16 23010368 23030558 16 17,3 0,007
500-18 23010374 23030564 18 17,8 0,019
500-20 23010370 23030566 20 17,8 0,011
500-25 23010372 23030562 25 20,3 0,022
500-30 23010376 23030566 30 23,6 0,040
FLARE FITTINGS
SAE J514 JIC
500-38 23010380 23030570 38 28,9 0,045
HOSE COUPLINGS
HOSES &
ADAPTORS
ID Code
Part No Tube O.D Tube O.D. Thread Size A B Hex Weight
St SS Inch MM UNF kg/pc
5010-04 23010397 23030597 1/4” 6 7/16”-20 19,9 14,4 12,7 0,015
5010-05 23010398 23030598 5/16” 8 1/2”-20 20,5 14,4 14,4 0,020
5010-06 23010399 23030600 3/8” 10 9/16”-18 20,8 14,5 15,8 0,025
BITE TYPE
FITTINGS
900-12 23010388 23030585 3/4” 18/20 1 1/16”-12 22,7 14,2 31,7 0,115
900-16 23010389 23030586 1” 25 1 5/16”-12 27,2 16,4 38,1 0,190
900-20 23010390 23030587 1 1/4” 30/32 1 5/8”-12 28,9 15,9 50,8 0,375
900-24 23010391 23030588 1 1/2” 38 1 7/8”-12 30,8 20,1 56,4 0,510
NOTE: Part No = Carbon Steel.
(When ordering stainless steel, add 316 to above Part Number.)
INFORMATION
TECHNICAL
GS-FLANGE
JIC 37° FLARE FITTINGS
SYSTEM
SAE J 514 (ISO 8434-2) BSP Gauge Adaptor, Union 1/4” BSP Female
VALVES
St SS Inch UNF G=BSP kg/pc
MM
1630-04-04 23010290 23030650 1/4 6 7/16”-20 1/4” 33,4 14,3 5,5 19,1 0,030
1630-04-08 23010283 23030651 1/4 6 7/16”-20 1/2” 41,1 17,1 6,5 28,6 0,105
1630-05-04 23010284 23030652 5/16 8 1/2”-20 1/4” 33,4 14,3 5,5 19,1 0,040
1630-05-08 23010286 23030653 5/16 8 1/2”-20 1/2” 41,1 17,1 6,5 28,6 0,105
BITE TYPE
FITTINGS
1630-06-04 23010285 23030654 3/8 10 9/16”-18 1/4” 33,4 14,3 5,5 19,1 0,040
1630-06-08 23010287 23030655 3/8 10 9/16”-18 1/2” 41,1 17,1 6,5 28,6 0,095
1630-08-04 23010288 23030656 1/2 12 3/4”-16 1/4” 33,4 14,3 5,5 19,1 0,065
1630-08-08 23010289 23030657 1/2 12 3/4”-16 1/2” 41,1 17,1 6,5 28,6 0,110
O-ring seal fitted on fittings 8 mm and above for stainless and 16 mm and above for steel.
FLARE FITTINGS
Part No = Carbon Steel. (When ordering Stainless Steel, add 316 to above Part No)
HOSE COUPLINGS
HOSES &
ADAPTORS