Professional Documents
Culture Documents
Flowcrete Uk Tds Hydraseal DPM January 2020 ENG
Flowcrete Uk Tds Hydraseal DPM January 2020 ENG
REACTION OF FIRE
EN 13501-1 BFL - s1
BOND STRENGTH
EN 13892-8 2.6 N/mm2
FLEXURAL STRENGTH
Solvent and water free, epoxy resin, EN 13 892-2 20 N/mm2
liquid applied surface damp proof TENSILE STRENGTH
membrane. Designed to withstand BS 63 19-7 15 N/mm2
For any other information please contact your local Flowcrete Technical Department.
vacuum cleaned in situ concrete slab.
Water Permeable: OVERLAYING
Semi permeable to water vapour and
Resin rich floor finishes (e.g. coatings) can be laid directly
tolerates up to 99% relative humidity. onto Hydraseal DPM. If there is no sand blind applied to the
Hydraseal DPM, then the resin floor finish should be applied
Excellent Adhesion: within 24 hours of the application of the Hydraseal DPM.
Solvent free, low in VOCs and Full Traffic 72 hrs 48 hrs 36 hrs
environmentally friendly. *These figures are typical properties achieved in laboratory tests at 20°C and at
50% Relative Humidity.
www.flowcrete.co.uk
Model Specification Moisture Effects - Without DPM
System Hydraseal DPM, Hydraseal One Coat, Blistering Occurs
Sand For a resin screed only: dry Silica Sand/Quartz Concrete Slab or Screed
1–2mm @ 2 kg/m2
Flowcrete’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained
on request. Any suggested practices or installation specifications for the composite floor or wall system (as opposed to individual product performance specifications) included in
this communication (or any other) from Flowcrete UK Ltd constitute potential options only and do not constitute nor replace professional advice in such regard. Flowcrete UK Ltd
recommends any customer seek independent advice from a qualified consultant prior to reaching any decision on design, installation or otherwise.
System Datasheet written for Flowcrete UK Ltd. Please consult Technical Team in your own country region for specific details. [07/01/2020, 03 UK]
Flowcrete UK Ltd
Booth Lane Sandbach Cheshire CW11 3QF United Kingdom
Tel: +44 1270 753 000 Email: uk@flowcrete.com www.flowcrete.co.uk