The document is a worksheet for a machining course assessing knowledge of grooving and parting off operations on a lathe. It contains 10 multiple choice questions testing understanding of how to identify, set up tools for, and apply grooving and parting off operations including identifying the different types of grooves, tool settings, and techniques to prevent chattering.
The document is a worksheet for a machining course assessing knowledge of grooving and parting off operations on a lathe. It contains 10 multiple choice questions testing understanding of how to identify, set up tools for, and apply grooving and parting off operations including identifying the different types of grooves, tool settings, and techniques to prevent chattering.
The document is a worksheet for a machining course assessing knowledge of grooving and parting off operations on a lathe. It contains 10 multiple choice questions testing understanding of how to identify, set up tools for, and apply grooving and parting off operations including identifying the different types of grooves, tool settings, and techniques to prevent chattering.
Learning outcomes: Turn Workpiece Learning Activity: Objectives 1. Identify the following lathe operation; • Grooving • Parting - off
Test Your Self
Direction: Identify the method use in setting tool. ENCIRCLE the letter that corresponds to the correct answer
1. It is used to machine a recess or an undercut on a cylindrical surface.
a. Grooving c. Facing b. Parting d. Threading 2. It is the operation of cutting off one end of the work. a. Grooving c. Facing b. Parting d. Threading 3. The three common types of grooves are: Square Groove, Round Groove, and; a. V-shaped Groove c. Threaded Groove b. Filleted Groove d. I Groove 4. In parting operation, when the tool is nearing the axis of the work. The feed should be; a. Allow until it cut c. The same b. Add more d. Reduce 5. Grooving is done for the following reasons, except: a. Ensure a proper fit for the mating components. b. Provide easy access to the grinding wheel to grind the face and the cylindrical portion. c. Provide clearance for the tool to travel partially up to the shoulder for thread cutting. d. Permit full travel of the nut up to the shoulder. 6. It is used for general purposes. a. Offset Parting Tool Holder b. Straight Tool Holder c. Parting Off Tool Holder d. Offset Straight Tool Holder 7. Set the parting off tool to centre height and at what degree to the work axis? a. 90° b. 60° c. 30° d. 45° 8. Tool set _________ so that blade will not rub. a. Round b. Flat c. Square d. Vee-form 9. In setting up a tool for parting off operation, chattering is prevented when you: a. apply cutting fluid b. use low speed and feed c. reduce the in feed d. use half speed for turning 10. Parting Off work held between centres is: a. a correct method of parting b. an incorrect method of parting c. the best method of parting d. the easiest method of parting