Professional Documents
Culture Documents
Gd-3072 Waterproof Shoes Bending Tester: Test Standard: SATRA TM92 Spesification
Gd-3072 Waterproof Shoes Bending Tester: Test Standard: SATRA TM92 Spesification
Gd-3072 Waterproof Shoes Bending Tester: Test Standard: SATRA TM92 Spesification
Spesification :
Bending angle:, 10 °, 15 °, 20 °, 25 °, 30 °, 35 °, 45 ° 50 °.
Volume: 65 × 83 × 129 cm
Weight: 205 kg
Power: 1 , AC 220 V, 3A
Specifications :
1
GD- 3093 CONTINUOUS HEEL IMPACT TESTER GD-1166 COMPUTER SYSTEM UNIVERSAL TESTING MACHINE
Accessories: dual motor cooling system host, silica gel desiccant number; standard 7. After test, it can return to the specified position automatically.
die two: Diameter 3.4cm, 4.3cm each one; inner ruler: Accuracy 0.1mm,
6.7 compliance test volume 100ml cups 8 sets (each set: nut three, a 8. Testing modes include stretch, compression, bending, adhesion,
gasket, a pressure ring, 100ml volume cuvette 1); tearing and fatigue, etc.
And requirements related accessories
2 3
GD-2030 UV LAMP FADING TESTER GD-2070 SALT SPRAY TESTER
Specifications: Specification :
Inner Dimensions 50×50×60 cm (W×D×H) 51×32×26 cm (W×D×H) Test Space 60x45x40 cm (WxDxH) 90x60x50 cm (WxDxH)
Dimensions 67×62×111 cm (W×D×H) 68×34×37 cm (W×D×H) Dimensions 114x76x119 cm (WxDxH) 142x78x128 cm (WxDxH)
Temperature Range Room temperature (+5°) ~ 200°C Room temperature Temperature Range Room Temperature ~ 80°C Room Temperature ~ 80°C
Temperature Controller P.I.D. Automatic Calculation Control Method P.I.D automatic Temperature P.I.D automatic Temperature
Calculation control Calculation control
Temperature Resolution 0.1°C
Temperature Resolution 0.1°C
Control Accuracy ±0.3 °C (Drying, aging)
Temperature Control ±0.3°C
Distribution Accuracy ±1% (1°C) at-room 100°C Accuracy
Timer 0 ~ 999.9 Hours/Minutes, Electronic 0 ~ 999.9 Hours/Minutes, Electronic Temperature Distribution ±1°C
display, Power failure memory type, display, Power failure memory type, Accuracy
Buzzer Buzzer
Timer 0~999.9 hours (minutes) digital 0~999.9 hours (minutes) digital
Compartment tray Dia. 45cm, 3 R.P.M, Height-adjustable 2 layer, Height not adjustable display display
UV light source Light bulb, UV/300W, with Bulb life Light Tube X 2,15W Accessories Test Salt, Graduated Cylinder, Tools Test Salt, Graduated Cylinder, Tools
timer
Safety Protection Independent EGO over-temperature Independent EGO over-temperature
Standard Accessories Shelves x 2 power failure, safety overload switch power failure, safety overload switch
Heating Mode Heated air circulation Spray Volume 1~10c.c./Hour
Safety Protection Independent EGO over-temperature Volume of Test Space 108 liters 270 liters
power failure, safety overload switch
Salt Sump Volume 15 liters 30 liters
Oven Body Material Outside is paint coating, inside is Outside is paint coating, inside is Test Time 90 hours 180 hours
SUS#304 stainless steel SUS#304 stainless steel
Specimen Tilted 15° 24 pieces 48 pieces
Weight 80kg 12kg 150x70mm Tilted 30° 15 pieces 30 pieces
Power 1PH, AC220V, 15A 1PH, AC220V, 1A Material F.R.P. F.R.P.
Weight About 60 kg About 150 kg
Power 1PH, AC220V, 50/60Hz, 6KW 1PH, AC220V, 50/60Hz, 3KW
4 5
GD-2091 PROGRAMMABLE TEMPERATURE & HUMIDITY TESTER GD-2200 PROGRAMMABLE FREEZING TESTER
Standard : GB/T2423/5170/10586, JIS C60068, ASTM D4714, Standard : GB/T2423//5170/10586, JIS C60068, ASTM D4714,
CNS3625/12565/12566 CNS3625/12565/12566
Inner Cabinet ( cm) 50×50×60 50×60×76 60×80×85 100×100×100 Temperature Control PID Micro-Computer Digital Touching Control Temperature
Calculation Controller.
Dimensions (cm) 115×75×150 115×85×165 130×105×170 170×125×185 Use programmable TFT-LCD control panel with RS-232 output,
Volume (Liter) 150 180 410 1000 can setting program for 5 Patterns; 50 Steps, 999Cycles.
P Temp Range -10, 20, -40, -600C, 100°C (Max arrive 150°C) Temperature Resolution
E and Accuracy 0.1°C Resolution, ± 0.3°C Accuracy
Temp Control Accuracy ±0.3°C ±0.5°C
R Heating System SUS #304 Stainless Steel Heater
F Temp Dist. Accuracy ±0.5°C ±1°C
Cooling System Fan Cooling Methods; High Efficiency All Sealed Compressor
O Humidity Range 20% ~ 98% (see Humidity Range Table)
R Material SUS # 304 stainless steel
M Humidity Control Accuracy ± 2.5% RH ± 3.0% RH
A Humidity Dist. Accuracy ± 3.0% RH ± ± 5.0% RH Time Setting 0~999.9H, Power failure memory type
N Safety Protection Electric Leakage, Overload, Compressor Overload, Overheat
C Heating Rate -60°C ~ 100°C, App 60Mins
and Power failure Protection
E Cooling Rate 20°C ~ -60°C, App 90Mins
Accessories Adjustable stainless steel Shelf X 2; Observation Window;
Recycle system Circulatory system fan forced circulation mode Inner Lamp; Sweatband demisting device
Heating system SUS # 304, stainless steel heater Power 1Ø, AC220V/50 or 60Hz
Humidification system Surface evaporation, the transparent structure
Cooling fan cooling mode Whole closed-type high-efficiency compressor
Dehumidification system Latent heat of freezing dehumidification mode
Water supply Water pumps to enhance water supply GD-3005 MANUAL SPECIMEN CUT PRESSER
Water storage tank Built-in drawer storage tank water tank for easy water
Return water recycling system Return water recycling system automatically, eliminating the Specification :
long-troubled water, and ensure clean water
Material Inner SUS#304 stainless steel Item Specification
6 7
GD-3006A AIR-OIL TYPE SPECIMEN CUT PRESSER GD-3025A DIN RUBBER ABRASION TESTER
Specification :
Item Specification
Power No Wear Wheel Diameter 150 mm, Length 460 mm, Rotational Speed 40 r.p.m.
Wear Sandpaper #60
Moving Stroke 4.2 mm/R.P.M.
GD-3006B AIR TYPE SPECIMEN CUT PRESSER Wear Stroke 40 m
Wear Speed 19.2 m/minute
Specification :
Accessories Sandpaper, Standard Glue, Rotary Knife Specimen
Item Specification Weight 40 kg
8 9
GD-3040 WATER RESISTANCE TESTER FOR UPPER LEATHER GD- 3062-2 CROCKMETER
(MAESER TYPE)
Standard:
Specification :
ISO-105, ASTM-D2054, AATCC-8, JIS-L0849
Standard : ASTM-D2099
Test Specimen : 1~4 Piece
Specification :
Dimensions of Specimen : 4”×4”±0125 ( 101.6×101.6±3.2mm )
Type : Dual rubs hammer motor type
Load Weight : Steel Ball Total Weight 135±5g
Displacement test : 30±1° Specimen : 140× 50mm
Speed : 90°±5cpm Load weight : 9N
Counter : LCD, 0~999999×4 sets
Motor : 1/4HP
Watt : 90W
Dimensions : 49×45×45cm Rubs speed : 60cpm
Specification :
GD-3051 TABER ABRASION TESTER 1. Abrasion head : 4, 6, 8, 9 heads
2. Counter : 0~999999 times
JIS-K5400, ASTM-D4157, D1044
3. Maximum expansion : crosswise: 60.5±0.5mm
10 11
Martindale Abrasion Tester 4 Abrasion Heads GD-5036 TELESCOPIC LEATHER UPPERS TESTER
Specification :
Test Standard : SATRA TM25, BS 3429
1. Controller & Counter: PLC modular control, color touch screen Spesification :
2. Test Specimen:44±1mm X 4
3. Load Weight: 595g, 795g Specimen size 64 × 64mm
4. Dimension: 565×565×450 mm Specimen number 12
5. Weight: 40kg
Grip V-shaped grip, angle of (40 ± 1) ° tip
6. Power:Ac220V50Hz 500W radius of (6.4 ± 0.5) mm arc-shaped
Telescopic Speed 300 ± 30cpm
Accessories :
Action grip stroke 19 ± 1.5 mm
1. 595/795g counterweight X 4/each
Jig separation distance 28.5 ± 2.5mm
2. Friction of Wool Cloth X 4/each
3. Friction Pad X 4/each Fixture close distance 9.5 ± 1.0mm
Counter LCD0 ~ 999.999
Motor AC 300W
GD-3070A WHOLE SOLE FLEXING TESTER Volume 550 × 350 × 300 mm
Weight Approx 170kg
Standard: EN344, SATRA TM161, ISO17707
Power 1 , AC220V, 5A.
Specification :
Test Specimen Shoe Soles X 3
Counter LCD, 0~999,999 GD-5100 PC-STYLE SHOES SLIP TESTER
Motor DC brushless 120W
Dimensions 100×45×54cm Test Standard : SATRA TMM144 and EN13287
12 13
GD-5130 ZIPPER RECIPROCATING FATIQUE GD-3079 Shoe Peeling Strength Tester
Item Specification
Test Standard :
ASTM D3514, D3885, D3886 AATCC 119,120 FTMS 191,5300,5302
FORD EFB 15J2/BN 112-01
Cutter`s width 20±0.1 mm or 10±0.05 mm
Specification :
Cutter`s moving down speed 20±2 mm/min
General wear performance
tester speed : 120rmp Elevating range 40 mm
General wear resistance Positioning rod and rod spacing 50-70mm (It can do adjustment)
test stroke : 25mm
Micrometer 0.001~10mm
Counting Display : LCD
Power : 220V 50HZ Dimension (W×D×H) 56 × 32 × 75 cm
Dimensions : 480.00 × 360.00 × 715mm Weight 45 kg
(L × W × H)
Weight : 43kg Power 1 , AC220V 50Hz (or specified by buyer)
MH-300 E DENSIMETER
Specification :
14 15