Professional Documents
Culture Documents
Nama: Ahmat Prabowo Kelas: A22 NIM:16504241040 Membuat Gambar 3D Secara Langsung
Nama: Ahmat Prabowo Kelas: A22 NIM:16504241040 Membuat Gambar 3D Secara Langsung
Kelas : A22
NIM :16504241040 Membuat Gambar 3D secara langsung
Command: _box
Command:
Command:
Command: _box
Command: _cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]: 30,30,0
Specify base radius or [Diameter] <15.0000>: 22.5
Specify height or [2Point/Axis endpoint] <30.0000>: 30
Command: _ucs
Current ucs name: *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] <World>: _zaxis
Specify new origin point or [Object] <0,0,0>:
Specify point on positive portion of Z-axis <0.0000,0.0000,1.0000>:
Command: _cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]: 30,18.75,0
Command:
SUBTRACT
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command: FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression]: 7.5
Select an edge or [Chain/Loop/Radius]:
Select an edge or [Chain/Loop/Radius]:
Select an edge or [Chain/Loop/Radius]:
Resuming FILLET command.
Select an edge or [Chain/Loop/Radius]:
Select an edge or [Chain/Loop/Radius]:
4 edge(s) selected for fillet.
Hasil akhir