This document summarizes the results of a test of the Z axis on a machine called HMC-72. The test was performed on May 30, 2022 and analyzed the maximum and average reversal and scatter values, as well as positional uncertainty and deviation. Environmental conditions like temperature and pressure were also recorded during the test.
This document summarizes the results of a test of the Z axis on a machine called HMC-72. The test was performed on May 30, 2022 and analyzed the maximum and average reversal and scatter values, as well as positional uncertainty and deviation. Environmental conditions like temperature and pressure were also recorded during the test.
This document summarizes the results of a test of the Z axis on a machine called HMC-72. The test was performed on May 30, 2022 and analyzed the maximum and average reversal and scatter values, as well as positional uncertainty and deviation. Environmental conditions like temperature and pressure were also recorded during the test.
Machine name HMC -72 Serial number 12005209-4 Targets 12 Linear
Axis under test C Number of runs 2 Alternate bidir Test date Monday 2022/05/30 04:57 PM
ZTZ - Analysis features Environmental conditions
Name Value (µm) Name Start End Min Max Maximum reversal (U max) 6.6 Air temp [°C] 36.3 36.2 36.2 36.3 Maximum scatter (Ps max) 2.0 Air pressure [mbar] 993.40 993.40 993.40 993.40 Mean reversal (U Mean) 2.5 Air humidity [%RH] 52 52 51 52 Mean scatter (Ps mean) 1.2 Material temp 1 [°C] Not recorded Not recorded Positional uncertainty (P) 25.8 Material temp 2 [°C] 35.5 35.5 35.5 35.5 Positional deviation (Pa) 19.7 Material temp 3 [°C] Not recorded Not recorded Expansion coefficient [ppm/°C] 11.70 11.70