Professional Documents
Culture Documents
Limpieza de Screen de Succion Convertidor
Limpieza de Screen de Succion Convertidor
Limpieza de Screen de Succion Convertidor
Page 1 of 3
Shutdown SIS
Previous Screen
Product: TRUCK
Model: 773F TRUCK EED
Configuration: 773F Off-Highway Truck EED00001-UP (MACHINE) POWERED BY C27 Engine
i04388579
Hot oil and hot components can cause personal injury. Do not allow hot
oil or hot components to contact the skin.
NOTICE
1. Park the machine on a level surface and stop the engine. Make sure that the transmission
control is in the PARK position.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 28/5/2022
773F Off-Highway Truck EED00001-UP (MACHINE) POWERED BY C27 Engine(SEB... Page 2 of 3
Illustration 1 g01261795
3. Wash the screen and the cover assembly in a clean, nonflammable solvent. Do not crush the
screen.
4. Inspect the seal on the cover assembly. If the seal is damaged, replace the seal with a new seal.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 28/5/2022
773F Off-Highway Truck EED00001-UP (MACHINE) POWERED BY C27 Engine(SEB... Page 3 of 3
6. Start the engine and operate the engine at low idle. Inspect the area for leaks and make any
necessary repairs.
7. Check the oil level in the transmission/torque converter. Refer to Operation and Maintenance
Manual, "Transmission and Torque Converter Oil Level - Check" for the proper procedure. If
necessary, add oil.
Copyright 1993 - 2022 Caterpillar Inc. Sat May 28 16:16:37 UTC-0400 2022
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 28/5/2022