Professional Documents
Culture Documents
Bolt Specifications
Bolt Specifications
Bolt Specifications
(800) 547-6758
sales@portlandbolt.com
Specifications
ASTM
The American Society for Testing and Materials is an international standards organization that develops and
publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.
Bolt Specifications
ASTM A193 Alloy steel and stainless steel bolting materials for high temperature or high pressure
service.
ASTM A307 Carbon steel bolts and studs, 60,000 psi tensile strength.
ASTM A320 Alloy steel and stainless steel bolting materials for low temperature service.
ASTM A325 Structural bolts, steel, heat treated, 120/105 ksi minimum tensile strength. Replaced by
ASTM F3125.
ASTM A354 Quenched and tempered alloy bolts, studs, and other externally threaded fasteners.
ASTM A449 Quenched and tempered steel bolts and studs for general use.
ASTM A490 Structural bolts, alloy steel, heat treated, 150 ksi minimum tensile strength. Replaced by
ASTM F3125.
ASTM F593 Stainless steel bolts, hex cap screws, and studs.
ASTM F1554 Anchor bolts designed to anchor structural supports to concrete foundations.
ASTM F3125 New, unified structural bolt specification replacing A325, A325M, A490, A490M, F1852,
and F2280
ASTM A536 Castings made of ductile iron, also called spheroidal or nodular iron.
ASTM A668 Untreated and heat-treated carbon and alloy steel forging for general industrial use.
Nut Specifications
ASTM A194 Carbon and alloy steel nuts for bolts for high pressure and high temperature service.
ASTM A563 Standard specification for carbon and alloy steel nuts.
https://www.portlandbolt.com/technical/specifications/ 9/29/2021
» Specifications Page 2 of 3
Plating Specifications
ASTM A153 Zinc coating (hot dip) on iron and steel hardware.
ASTM F2329 Zinc coating, hot dip, for bolts, screws, washers, nuts, and special threaded fasteners.
Rebar Specifications
ASTM A615 Deformed and plain carbon steel bars for concrete reinforcement.
ASTM A706 Deformed and plain low alloy steel bars for concrete reinforcement with enhanced
weldability.
Steel Specifications
ASTM A36 Carbon steel shapes, plates, and bars in general structural purposes.
ASTM A572 High strength, low-alloy structural steel shapes, plates, and bars.
ASTM A588 High strength, low-alloy structural steel improved atmospheric corrosion resistance.
Washer Specifications
ASTM F844 Unhardened, general purpose, flat washers.
ASTM F959 Compressible washer type direct tension indicators (DTIs) in diameters 1/2 to 1-1/2
inches
ASTM F2437 Compressible washer type direct tension indicators (DTIs) in diameters 1/4 to 2-1/2
inches
AASHTO
The American Association of State Highway and Transportation Officials is an organization that sets standards for
highway design and construction. Most AASHTO standards are direct equivalents to existing ASTM standards.
Bolt Specifications
AASHTO M164
AASHTO M253
AASHTO M291
AASHTO M314
https://www.portlandbolt.com/technical/specifications/ 9/29/2021
» Specifications Page 3 of 3
Nut Specifications
AASHTO M292
Plating Specifications
AASHTO M232
Washer Specifications
AASHTO M293
SAE
SAE International (Society of Automotive Engineers) is a standards development organization with fastener
specifications that apply to the aerospace, automotive, and commercial vehicle industries. SAE bolts are also used
in machinery, equipment, and OEM applications.
Bolt Specifications
SAE J429 Mechanical and material requirements for externally threaded fasteners.
Nut Specifications
SAE J995 Mechanical and material requirements for steel nuts.
CSA
Canadian Standards Association
Steel Specifications
CSA G40.21 Structural quality steel shapes, plates, and bars.
https://www.portlandbolt.com/technical/specifications/ 9/29/2021