Professional Documents
Culture Documents
65-1501 Victor Antorchas Rectas para Maquina
65-1501 Victor Antorchas Rectas para Maquina
They are available in two and three hose versions. Two hose torches MACHINE REFERENCE GUIDE
are available in 4.5" (114.3 mm), 10" (254.0 mm) and 18" (457.2 mm) Tip Fuel Gas
models, and three hose torches are available in 10" (254.0 mm) and 18" Torch Model Cut Capacity
Series Usage
(457.2 mm) models. “FC” MODELS
ST 2600FC Any Fuel 1/8" to 8" (3.2 mm to
THE CHECK VALVE: 1
VanGuard ™
Gas 203.2 mm)
Prevents the reverse flow of gases ST 1000FC Any Fuel 1/8" to 5" (3.2 mm to 127.0
1
Seat VanGuard Gas mm)
ST 900FC Any Fuel 1/8" to 5" (3.2 mm to 127.0
Retainer Guide 1
VanGuard Gas mm)
MACHINE TORCHES
Gas Outlet Any Fuel
MT 200 (2 Hose) 1 7" (177.8 mm)
Flow Side Gas
Any Fuel
MT 300 (3 Hose) 1 12" (304.8 mm)
Gas
Any Fuel
MT 1065 (3 Hose) 1 7" (177.8 mm)
Disk assembly seals Spring compresses under normal Gas
tight against seat in flow, moving disk assembly Any Fuel
MT 5 (3 Hose) 1 7" (177.8 mm)
event of reverse flow forward and allowing gas flow Gas
CHECK
VALVE TIP TYPE –
Pair Pack BTN for use with Natural Gas & Propane.
BTMP for use with Propylene Gases
(For use with MT200, MT300 Series Machine Cutting Torches)
ACCESSORY Cutting
Length of Oxygen Fuel
REVERSE FLOW Tip Size Speed IPM Oxygen
Bevel Pressure Pressure
CHECK VALVES Pressure
Supplied with MT 200 SERIES
all machine 1 4 10/18 60/75 8/10 –
torches
1.5 4 8/16 60/75 8/10 –
or added
operator 2 4 6/14 60/75 8/10 –
safety 2.5 4 5/12 60/75 8/10 –
3 5 6/11 60/75 8/12 –
3.5 5 5/10 60/75 8/12 –
PRE- PRE- 4 5 4/9 60/75 8/12 –
DRILLED STRAIGHT DRILLED
THROUGH DESIGN 4.5 5 4/8 60/75 8/12 –
1.38" 1.38" 5 6 3/8 65/85 8/15 –
(35.1 mm) Minimizes turbulence, (35.1 mm)
improves cutting 5.5 6 3/7 65/85 8/15 –
DIAMETER DIAMETER
BARRELS performance BARRELS 6 6 3/6 65/85 8/15 –
For three For three MT 300N SERIES
position position 1 4 10/18 35/65 10/12 40/60
mounting mounting 1.5 4 8/16 35/65 10/12 40/60
flexibility flexibility 2 4 6/14 35/65 10/12 40/60
HIGH PERFORMANCE 2.5 4 5/12 35/65 10/12 40/60
MIXER DESIGN 3 5 6/11 35/65 10/12 40/65
Provide optimum 3.5 5 5/10 35/65 10/12 40/65
performance 4 5 4/9 35/65 10/12 40/65
MACHINE TORCHES
that minimizes turbulence and improves cut quality. Accessory reverse flow check valves are supplied for use at the torches inlet connection. All
machine torches use Series 1 cutting tips and are supplied with accessory reverse flow check valves to be used on the torch inlet connections.
MT 5
THREE HOSE
n ut capacity: 7" (177.8 mm)
C
n For use with all fuel gases
n Series 1 cutting tips
n Multi-torch beveling