Professional Documents
Culture Documents
Pub Iso 2016-03
Pub Iso 2016-03
Price group
ISO 14270:2016 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for
mechanized peel testing resistance spot, seam and embossed projection welds C
ISO 14272:2016 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for
cross tension testing of resistance spot and embossed projection welds B
ISO 14273:2016 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for
tensile shear testing resistance spot and embossed projection welds B
ISO 16631:2016 * Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) pip-
ing systems, for water applications and for plastic pipeline connections, repair and replacement F
ISO 4046-1:2016 * Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index
A
ISO 4046-2:2016 * Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology
A
ISO 4046-3:2016 * Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology
A
ISO 4046-4:2016 * Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and
converted products A
ISO 4046-5:2016 * Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and
board A
ISO 7364:2016 * Ships and marine technology — Deck machinery — Accommodation ladder winches
A
ISO/PAS 19891- * Ships and marine technology — Specifications for gas detectors intended for use on board
1:2016 ships — Part 1: Portable gas detectors for atmosphere testing of enclosed spaces A
ISO 18421:2016 * Ships and marine technology — Inland navigation vessels — Lifebuoy housings
A
ISO 16016:2016 * Technical product documentation — Protection notices for restricting the use of documents and
products B
TC 17 Steel
ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings
C
ISO 5003:2016 * Flat bottom (Vignole) railway rails 43 kg/m and above
H
ISO 8278:2016 * Aerospace series — Hydraulic, pressure compensated, variable delivery pumps — General
requirements F
ISO 9206:2016 * Aerospace series — Constant displacement hydraulic motors — General specifications
E
ISO 17546:2016 * Space systems — Lithium ion battery for space vehicles — Design and verification require-
ments G
ISO * Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle
27875:2010/Amd orbital stages — Amendment 1 XZ
1:2016
ISO 14520- * Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: Gen-
1:2015 eral requirements H
TC 22 Road vehicles
ISO 13400- * Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-
4:2016 based high-speed data link connector B
ISO 27145- * Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-
4:2016 OBD) communication requirements — Part 4: Connection between vehicle and test equipment C
ISO 12103- * Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust
1:2016 C
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check
3:2012/Amd valve — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual
4:2012/Amd valve — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual
5:2012/Amd cylinder valve — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic
6:2012/Amd valve — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure
9:2012/Amd regulator — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure
13:2012/Amd relief device (PRD) — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess
14:2012/Amd flow valve — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid
16:2012/Amd fuel line in stainless steel — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible
17:2012/Amd fuel line — Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter —
18:2012/Amd Amendment 1 XZ
1:2016
ISO 15500- * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings
19:2012/Amd — Amendment 1 XZ
1:2016
ISO 13860:2016 Machinery for forestry — Forwarders — Terms, definitions and commercial specifications
B
ISO 7404-1:2016 * Methods for the petrographic analysis of coals — Part 1: Vocabulary
A
TC 29 Small tools
ISO/TS 13399- * Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D mod-
309:2016 els — Tool holders for indexable inserts G
ISO/TS 13399- * Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D mod-
311:2016 els — Solid reamers D
ISO/TS 13399- * Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D mod-
405:2016 els — Collets E
ISO 10889- Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
2:2016 A
ISO 10889- Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
3:2016 B
ISO 10889- Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
4:2016 B
ISO 10889- Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
5:2016 A
ISO 10889- Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
6:2016 B
ISO 10889- Tool holders with cylindrical shank — Part 7: Type F with taper seat
7:2016 A
ISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
C
ISO 3467:2016 Machine taper pin reamers with Morse taper shanks
A
ISO 10145- End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel
1:2016 shank A
ISO 10145- End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper
2:2016 shank A
ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-
section conduits running full — Part 5: Cone meters C
TC 34 Food products
ISO 7304-1:2016 Durum wheat semolina and alimentary pasta — Estimation of cooking quality of alimentary
pasta by sensory analysis — Part 1: Reference method B
ISO 19344:2015 Milk and milk products — Starter cultures, probiotics and fermented products — Quantification
of lactic acid bacteria by flow cytometry D
ISO 27105:2016 Milk and cheese — Determination of hen's egg white lysozyme content by high performance
liquid chromatography B
ISO 18744:2016 Microbiology of the food chain — Detection and enumeration of Cryptosporidium and Giardia in
fresh leafy green vegetables and berry fruits D
ISO 9936:2016 Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by
high-performance liquid chromatography C
ISO 15753:2016 Animal and vegetable fats and oils — Determination of polycyclic aromatic hydrocarbons
D
ISO 13299:2016 Sensory analysis — Methodology — General guidance for establishing a sensory profile
F
ISO 7784-1:2016 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abra-
sive-paper covered wheels and rotating test specimen B
ISO 7784-2:2016 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abra-
sive rubber wheels and rotating test specimen B
ISO 7784-3:2016 Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abra-
sive-paper covered wheel and linearly reciprocating test specimen B
ISO 16773- Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
1:2016 Part 1: Terms and definitions A
ISO 16773- Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
2:2016 Part 2: Collection of data D
ISO 16773- Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
3:2016 Part 3: Processing and analysis of data from dummy cells B
TC 36 Cinematography
TC 38 Textiles
ISO 17751- Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their
1:2016 blends — Part 1: Light microscopy method F
ISO 17751- Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their
2:2016 blends — Part 2: Scanning electron microscopy method F
TC 39 Machine tools
ISO 13050:2014 * Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and
pulleys G
TC 42 Photography
ISO/TS 19567- * Photography — Digital cameras — Texture reproduction measurements — Part 1: Frequency
1:2016 characteristics measurements using cyclic pattern D
ISO/TS * Imaging materials — Lenticular lens sheet — Measurements and specifications of dimensions
20328:2016 B
ISO 22028- * Photography and graphic technology — Extended colour encodings for digital image storage,
1:2016 manipulation and interchange — Part 1: Architecture and requirements G
TC 43 Acoustics
ISO 1996-1:2016 * Acoustics — Description, measurement and assessment of environmental noise — Part 1:
Basic quantities and assessment procedures F
ISO 17208- * Underwater acoustics — Quantities and procedures for description and measurement of un-
1:2016 derwater sound from ships — Part 1: Requirements for precision measurements in deep water D
used for comparison purposes
ISO/TR 25901- Welding and allied processes — Vocabulary — Part 1: General terms
1:2016 A
ISO/TR 25901- Welding and allied processes — Vocabulary — Part 3: Welding processes
3:2016 A
ISO/TR 25901- Welding and allied processes — Vocabulary — Part 4: Arc welding
4:2016 A
ISO 15614- Specification and qualification of welding procedures for metallic materials — Welding proce-
8:2016 dure test — Part 8: Welding of tubes to tube-plate joints C
ISO 17662:2016 Welding — Calibration, verification and validation of equipment used for welding, including an-
cillary activities E
ISO 8611- Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection
2:2011/Amd of tests — Amendment 1 XZ
1:2016
TC 54 Essential oils
TC 60 Gears
TC 61 Plastics
ISO 13802:2015 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile im-
pact-testing E
ISO 19901- Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1:
1:2015 Metocean design and operating considerations H
TC 68 Financial services
ISO 9564-4:2016 * Financial services — Personal Identification Number (PIN) management and security — Part 4:
Requirements for PIN handling in eCommerce for Payment Transactions C
ISO 13491- * Financial services — Secure cryptographic devices (retail) — Part 1: Concepts, requirements
1:2016 and evaluation methods E
ISO 13491- * Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance
2:2016 checklists for devices used in financial transactions F
ISO 18762:2016 Tubes of titanium and titanium alloys — Welded tubes for condensers and heat exchangers —
Technical delivery conditions B
ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
E
ISO Reference radiation fields for radiation protection — Definitions and fundamental concepts —
29661:2012/Amd Amendment 1: Reference point of personal dosemeters XZ
1:2015
TC 87 Cork
ISO 2385:2015 Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled
reproduction cork and raw corkwaste — Sampling to determine moisture content A
ISO 2386:2015 Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled
reproduction cork and raw corkwaste — Determination of moisture content A
TC 89 Wood-based panels
ISO 16900- Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical
6:2015 resistance/strength of components and connections D
ISO 16900- Respiratory protective devices — Methods of test and test equipment — Part 9: Determination
9:2015 of carbon dioxide content of the inhaled gas C
ISO 16900- Respiratory protective devices — Methods of test and test equipment — Part 13: RPD using
13:2015 regenerated breathable gas and special application mining escape RPD: Consolidated test for B
gas concentration, temperature, humidity, work of breathing, breathing resistance, elastance
and duration
TC 106 Dentistry
ISO 3950:2016 Dentistry — Designation system for teeth and areas of the oral cavity
A
ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Mag-
netic method F
ISO 18535:2016 Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like
carbon films by ball-on-disc method B
ISO 21940- * Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with
12:2016 flexible behaviour E
TC 114 Horology
ISO 3764:2016 Timekeeping instruments — Movements — Types, dimensions and nomenclature
B
TC 115 Pumps
ISO 18643:2016 Fertilizers and soil conditioners — Determination of biuret content of urea-based fertilizers —
HPLC method B
ISO 18645:2016 * Fertilizers and soil conditioners — Water soluble fertilizer — General requirements
B
ISO 13165- * Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-
3:2016 spectrometry C
ISO 19820:2016 * Water quality — Determination of the acute toxicity to the marine rotifer Brachionus plicatilis
C
ISO 7206- * Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endur-
4:2010/Amd ance properties and performance of stemmed femoral components — Amendment 1 XZ
1:2016
TC 159 Ergonomics
ISO 16932:2016 * Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
D
ISO 10322- Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for single-
1:2016 vision and multifocal lens blanks B
ISO 10322- Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progres-
2:2016 sive-power and degressive-power lens blanks B
ISO 10685- Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification
2:2016 — Part 2: Commercial information C
ISO 14880- Optics and photonics — Microlens arrays — Part 1: Vocabulary and general properties
1:2016 D
ISO 7176- Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles —
19:2008/Amd Amendment 1: Annex G XZ
1:2015
ISO 19028:2016 * Accessible design — Information contents, figuration and display methods of tactile guide maps
E
IEC 62264- * Enterprise-control system integration — Part 4: Objects and attributes for manufacturing opera-
4:2016 tions management integration H
ISO 18554:2016 * Surface chemical analysis — Electron spectroscopies — Procedures for identifying, estimating
and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray C
photoelectron spectroscopy
ISO/TS 21219- * Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts
9:2016 group, generation 2 (TPEG2) — Part 9: Service and network information (TPEG2-SNI) G
ISO 16484- Building automation and control systems (BACS) — Part 6: Data communication conformance
6:2014 testing H
ISO 18550:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) — Testing method for mac-
ro-heterogeneity in microstructure B
TC 207 Environmental management
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environ-
mental labelling) E
TC 210 Quality management and corresponding general aspects for medical devices
ISO 15225:2016 * Medical devices — Quality management — Medical device nomenclature data structure
C
ISO 16142- * Medical devices — Recognized essential principles of safety and performance of medical de-
1:2016 vices — Part 1: General essential principles and additional specific essential principles for all F
non-IVD medical devices and guidance on the selection of standards
IEC 80369- * Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for
5:2016 limb cuff inflation applications G
ISO 80369- * Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for
6:2016 neuraxial applications F
ISO 16278:2016 Health informatics — Categorial structure for terminological systems of human anatomy
C
ISO/HL7 * Health informatics — HL7 Personal Health Record System Functional Model, Release 1 (PHRS
16527:2016 FM) G
ISO 4918:2016 * Resilient, textile and laminate floor coverings — Castor chair test
C
TC 229 Nanotechnologies
ISO 17827- Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1:
1:2016 Oscillating screen method using sieves with apertures of 3,15 mm and above B
ISO 18134- Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total mois-
2:2015 ture — Simplified method A
ISO 18668- * Traditional Chinese medicine — Coding system for Chinese medicines — Part 1: Coding rules
1:2016 for Chinese medicines D
ISO/IEC Guide Guide for writing standards taking into account the needs of micro, small and medium-sized
17:2016 enterprises B
ISO 80079- * Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres —
36:2016 Basic method and requirements H
ISO 80079- * Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-
37:2016 electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid im- H
mersion ''k''
ISO/IEC 11889- * Information technology — Trusted platform module library — Part 1: Architecture
1:2015 H
ISO/IEC 16512- * Information technology — Relayed Multicast Control Protocol (RMCP) — Framework — Part 1:
1:2016 B
ISO/IEC 16512- * Information technology — Relayed multicast protocol: Specification for simplex group applica-
2:2016 tions — Part 2: H
ISO/IEC * Information technology — Linear Tape File System (LTFS) Format Specification
20919:2016 G
ISO/IEC * Information technology — Mathematical Markup Language (MathML) Version 3.0 2nd Edition
40314:2016 H
ISO/IEC 13157- * Information technology — Telecommunications and information exchange between systems —
2:2016 NFC Security — Part 2: NFC-SEC cryptography standard using ECDH and AES C
ISO/IEC 13157- * Information technology — Telecommunications and information exchange between systems —
3:2016 NFC Security — Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM B
ISO/IEC 14443- * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical
1:2016 characteristics B
ISO/IEC TR * Information technology — Programming languages, their environments and system software
10182:2016 interfaces — Guidelines for language bindings F
ISO/IEC 17760- * Information technology — AT Attachment — Part 102: ATA/ATAPI Command set - 2 (ACS-2)
102:2016 H
ISO/IEC 14888- * Information technology — Security techniques — Digital signatures with appendix — Part 3:
3:2016 Discrete logarithm based mechanisms H
ISO/IEC 23005- * Information technology — Media context and control — Part 2: Control information
2:2016 H
ISO/IEC 23005- * Information technology — Media context and control — Part 4: Virtual world object characteris-
4:2016 tics H
ISO/IEC 23005- * Information technology — Media context and control — Part 5: Data formats for interaction
5:2016 devices H
ISO/IEC 23005- * Information technology — Media context and control — Part 6: Common types and tools
6:2016 H
ISO/IEC 23008- * Information technology — High efficiency coding and media delivery in heterogeneous envi-
3:2015 ronments — Part 3: 3D audio H
ISO/IEC 23008- * Information technology — High efficiency coding and media delivery in heterogeneous envi-
5:2015/Amd ronments — Part 5: Reference software for high efficiency video coding — Amendment 1: Ref- XZ
1:2016 erence software for format range extensions profiles
ISO/IEC 24752- * Information technology — User interfaces — Universal remote console — Part 2: User interface
2:2014 socket description F
ISO/IEC 30106- * Information technology — Object oriented BioAPI — Part 2: Java implementation
2:2016 G
ISO/IEC 30134- * Information technology — Data centres — Key performance indicators — Part 1: Overview and
1:2016 general requirements B
Standards confirmed
The following International Standards are confimred for a five year period:
ISO 2493-1:2010
ISO 12625-8:2010
ISO 15893:2010
ISO 23339:2010
ISO 7240-20:2010
ISO 12188-1:2010
ISO 7745:2010
ISO 12924:2010
ISO 13738:2011
TC 29 Small tools
TC 34 Food products
ISO 27608:2010
ISO 19334:2010
ISO 860:2007
TC 38 Textiles
ISO 30023:2010
TC 43 Acoustics
TC 47 Chemistry
TC 54 Essential oils
ISO 10869:2010
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
ISO 17078-4:2010
ISO 28781:2010
ISO 11462-2:2010
ISO 7967-2:2010
ISO 26802:2010
ISO/TS 16491:2012
TC 89 Wood-based panels
ISO 16894:2009
ISO 12609-1:2013
ISO 12609-2:2013
ISO 13822:2010
TC 106 Dentistry
ISO 27020:2010
ISO 4534:2010
ISO 12690:2010
ISO 14921:2010
ISO 28762:2010
TC 113 Hydrometry
ISO 2425:2010
ISO 28927-4:2010
ISO 15001:2010
ISO 12643-5:2010
ISO 15076-1:2010
ISO 5597:2010
ISO/TS 11774:2011
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/TS 16479:2012
ISO 11771:2010
ISO/TS 12869:2012
ISO 7827:2010
ISO 5667-21:2010
ISO 29941:2010
TC 159 Ergonomics
ISO 9241-129:2010
ISO 10244:2010
ISO 12029:2010
ISO 9336-1:2010
ISO 11986:2010
ISO 14534:2011
ISO 15192:2010
ISO 16484-1:2010
TC 221 Geosynthetics
ISO/TS 13434:2008
ISO 29990:2010
JTC 1 Information technology
ISO/IEC 24727-6:2010
ISO/IEC 24702:2006
ISO/IEC 13250-6:2010
Standards withdrawn
TC 22 Road vehicles
TC 34 Food products
TC 43 Acoustics
TC 60 Gears
TC 68 Financial services
TC 92 Fire safety
TC 138 Plastics pipes, fittings and valves for the transport of fluids