Professional Documents
Culture Documents
Wire Wound Chip Inductors: Features
Wire Wound Chip Inductors: Features
LLM2520
(Previous name FSLM2520)
Inductance Range: 0.1~220μH (E-12)
FEATURES/特長
づ け
• Wire-wound miniature chip inductor most suitable for • 巻線形構造の面実装小型チップインダクタ
surface mount. • 各種電子機器の信号処理用として、セットの薄形化、高
• It is recommended for wide general use for signal 密度実装への対応に最適
conditioning in a variety of electronic equipment. • 低背形1.7mm Max. (1.6mm Typ.)
• Low profile 1.7mm Max height. (1.6mm Typ.) • 0.1∼220μHまでの幅広いインダクタンス範囲
• Wide inductance range from 0.1 to 220μH. • リフロはんだ付けが可能
• Superior solderability and high heat-resistance for reflow • 角形外装、金属端子構造による高い実装信頼性と優れた
soldering. 機械的、耐候的信頼性
• Excellent environmental and mechanical stability. • RoHS指令対応
• RoHS compliant.
DIMENSIONS/外形寸法図
Recommended patterns
推奨パターン図
(Unit: mm)
ELECTRICAL CHARACTERISTICS/電気的特性
EXAMPLES OF CHARACTERISTICS/代表特性例
Q vs Frequency
70
60
4.7µH
4.7μH 0.47µH
0.47μH
50
47μH
40
Q
47µH
30
20
10
0
1 10 100
Frequency (MHz)
continued on next page
次頁へ続く
Wire Wound Chip Inductors 巻線チップインダクタ
continued from previous page
前頁より続く
(1) Inductance is measured with a LCR meter 4194A (*) or 4291A (*) (1) インダクタンスはLCRメータ4194A (*)または4291A (*)により測
(2) DC resistance is measured with a Digital Multimeter TR6871 定する。
(Advantest) or equivalent. (2) 直流抵抗はデジタルマルチメータTR6871 (Advantest)または同等
(3) Rated DC current is that which causes a 10% inductance 品により測定する。
reduction from the initial value, or coil temperature to rise by (3) 最大許容電流は、直流重畳電流を流した時インダクタンスの値が
20°C, whichever is smaller. (Reference ambient temperature 初期値より10%減少する直流電流値、または直流電流により、コ
20°C) イルの温度が20℃上昇の何れか小さい値です。(周囲温度20℃
を基準とする)
* Agilent Technologies
* Agilent Technologies