Professional Documents
Culture Documents
Eagle2Pro Manual
Eagle2Pro Manual
A
RUN
E G
C
LE
AM
MA
N UAL
USER
Connection
* Unplug the 5D-OSD menu cable after OSD setting.
Transmitter
Power in
GND
5-36v in
GND
UP To VBAT+ Video out
L R
Audio out
DOWN
VBAT+
5D-OSD menu cable
Dimensions & Installation
28mm
3 3
3.6mm
MIC
26mm
VBAT+
Audio
Video
5-36V
GND
GND
OSD
2 1 4 4 1 2
OSD Menu
· Voltage Calibration
· Press and hold the RIGHT button for 2 seconds
to select the voltage
· Press and hold the CENTER button for 2 seconds,
the voltage starts to flash, now you can adjust the
Voltage:
· Reduce (LEFT button) or increase (RIGHT button)
16.8v RunCam 01:08 0.1V each press. Maximumadjustment range: ± 1v
· After adjustment, press the CENTER button to
select the voltage, then press it again to save and
· Quick settings: exit.
Long press the LEFT/DOWN/RIGHT button
for 2 seconds to activate the VOLTAGE/PILOT
· The OSD displays by default the input voltage of
/TIMER, then you can use the UP, DOWN,
the camera. If the VBAT + cable is connected to
LEFT and RIGHT buttons to move it to the
the battery's positive side, it displays the battery
appropriate location on the screen, and press
voltage instead.
the CENTER button to exit.
OSD Menu
OSD Setting: Press and hold the UP button for 2 seconds to enter OSD setup menu.
· PILOT: ON/OFF
RunCam
· TIMER: ON/OFF
1234567890ABCDEFG · VOLTAGE: ON/OFF
HIJKLMNOPQRSTUVWX · BASELINE: OFF/1-9
YZa b c d e f g h i j k l m n o · EXIT: Save the current settings and exit
pqrstuvwxyz.-:/@
· Customize the PILOT name: Use the UP, DOWN,
PILOT ON
LEFT and RIGHT buttons to navigate through the
TIMER ON letters and confirm with the CENTER button.
VOLTAGE ON
BASELINE OFF
DEFAULT
EXIT
Camera Menu
MAINMENU IMAGE
IMAGE
DAY&NIGHT Color MAX GAIN 9
VIDEO STANDARD PAL-50HZ WDR ON
SCREEN FORMAT 4-3 IMAGE ENHANCE
LANGUAGE ENGLISH MIRROR OFF
LOAD DEFAULT BRIGHTNESS 36
SOFT VERSION ZOOM IN 0
SAVE&EXIT RETURN
EXIT
IMAGE ENHANCE
SHARPNESS
SATURATION
RETURN