Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

AWAZEL TEX 80

High performance, needle punched, non-woven Geotextile fabric

Description Instructions for Application

Geo-textile fabric is a high performance The geotextile fabric can be loosely laid
polymeric non-woven stable fibre based depending on type of application and
on polyester with a high degree of site conditions. The surface generally
dimensional stability. It is used as a should be clean and free from debris
separation, filtration and moisture and large cavity. For roof applications,
barrier. geotextile should be applied upon clean
substrate, either thermal insulation
board or waterproofing membrane.
Features
Health & Safety
 Excellent resistance to chemical
compounds and salts normally present All safety measures should be taken
in the soil during application. Fire extinguishers
 Excellent UV resistance should be available on the site. Workers
should wear personnel protective tools
 Durable and easy to install
such as gloves and goggles during
 Remarkable resistance to aggressive application.
attack of salts and chemicals
 Good tear and puncture resistance Packing

It is produced in rolls of 3 x 100 meters.


Function The rolls are wrapped with double PE
foil.
Geotextiles are used to provide
protection, filtration, separation, Storage & Material Handling
reinforcement and drainage functions
in soil, rock and waste materials. They The rolls should always be stored in a
are also specifically used as separation shaded area and not to be left on direct
and protection layers within structural sunlight for more than 14 days.
waterproofing system, protection and
moisture mats within the roofing
system.
AWAZEL TEX 80
High performance polymeric non-woven Geotextile fabric

TECHNICAL DATA

Properties Typical Results Test Method

Roll Size, (Width) 3 mts. Nominal


Roll Size, (Length) 100 mts. Nominal
Nominal Thickness, 2Kpa 1.3mm EN ISO 9663-1
Nominal Unit Weight 80 gr/m2 EN ISO 9864

Tensile Strength (CD), kN/m : 6.9 EN ISO 10319

Tensile Strength (MD), kN/m : 6.1 EN ISO 10319

Dynamic Cone Drop 26mm EN 918

Flow Rate (lt/m2/s) 90 EN ISO 11058

Note : The above shown technical data are typical results obtained, to the best of our
knowledge, from our quality control records, extra details can be provided upon request.

MADE IN INDIA
:Tel : +974 4420571, Fax : +974 44131294, P.O. Box : 31741, Doha - Qatar
E-mail infoqatar@awazel.com Website : www.awazelintl.com

You might also like