Professional Documents
Culture Documents
History of Widescreen Aspect Ratios Examples Podcasts Audio/Videocontact
History of Widescreen Aspect Ratios Examples Podcasts Audio/Videocontact
The following list is only a small portion of all of the various filming formats that
have been used. Because so many different formats have existed, only the more
popular or significant filming formats are listed. Click on any image to see a larger
version.
Example of a 1.33:1 silent film frame. This composite is from my own film
scans and a screen shot from The Gold Rush, which is in the public domain.
Flat/Spherical
Aspect ratios: Various
Flat (or "spherical") lenses are used to produce an uncompressed image on the film.
When projecting from 35mm film onto a screen, special requirements are usually
not needed to project the image on the screen, depending on the final aspect ratio
(AR).
Formats like Super 35 are filmed using flat lenses but are often cropped to achieve
the intended AR. If the final result is wider than a 1.85:1 image, the final product
will usually be anamorphically compressed thus requiring anamorphic projection
lenses to expand the image to the correct AR.
The Phantom Menace ©1999 Lucasfilm, Ltd.
Image taken by yours truly from a 35mm strip that was included with The Phantom Menace widescreen VHS box
set.
Anamorphic
Aspect ratios: Various, generally 2:1 to 2.76:1
Originally designed by Henri Chrétien during World War I for military reasons,
anamorphic lenses are used specifically for widescreen presentations. By
compressing the image horizontally, more of the image can be stored in the frame.
The final projection (when shown through an anamorphic projector lens of the
same power) will have a much wider aspect ratio than the film frame itself,
resulting in a panoramic view. This format produces high quality projections
because the entire frame is used.
Standard 4-perf 35mm frame from Robocop 2 matted to apprx. 1.7:1. © 1990
Orion Pictures
Image taken by yours truly from a 35mm "No Smoking" bumper for Robocop 2.
Matted
Aspect ratios: 1.66:1 to 2.35:1
Matted aspect ratios have been in use primarily from the early 1950s as a framing
device to produce a widescreen effect from a standard 1.37:1 frame. Soft
matte usually involves filming and delivering the complete 1.37:1 frame with the
expectation that the top and bottom will be matted out at the projector to achieve
the intended aspect ratio. Alternately, mattes can be added during post-
production. Hard matte involves masking the frame in camera during the shoot.
The Super 35 format (see below) is similar to open matte in that it can produce a
very wide AR by using only a portion of the 1.37:1 frame, which results in a grittier
look and feel. The use of soft matte has resulted in unintended gaffes when such
movies are converted to another format with the mattes removed, which happened
often with "full screen" DVDs. Because the mattes usually hid boom mikes and
other equipment, such equipment could then be seen in the open matte versions.
For several decades, the standard TV format was 4:3 or 1.33:1, where the screen
was 1.33 times wider that its height, in order to match the Academy ratio that
people had become accustomed to, including many in the industry. Although
engineers could have chosen any aspect ratio that they wanted, film would be used
as source material (since videotapes as we know them didn't exist at the time); so
using an AR closer to the Academy ratio made sense.
Note that this has nothing to do with resolution or signal requirements. Although
both NTSC and PAL were designed for 4:3 TVs, the two technologies are not
compatible.
1.77:1 (or 16:9)
The 16:9 format was proposed in the early 1980s by Dr. Kerns H. Powers, who
concluded that 16:9 was the appropriate aspect ratio to use to more easily
accommodate the various aspect ratios that were being used at the time, ranging
from the 1.33:1 TV standard to the 2.39:1 CinemaScope/anamorphic standard. The
16:9 format was standardized by the International Telecommunication Union's ITU-
R Recommendation BT.709 in 1990. In July 1993, the European Union approved
the 16:9 Action Plan "to ensure the accelerated development of the market for
advanced television services in the 16:9 format".
1.33:1 content is correctly shown in the center of the screen in a pillarbox format
with unused areas on the sides. Widescreen content 1.85:1 or greater will still have
"black bars" on the top and bottom, but they will be narrower than the same
content as shown on 4:3 screens.
Composite example was made by yours truly from multiple 35mm film
sources.
Academy Ratio
Aspect ratios: 1.37:1, can be matted to 1.66:1, 1.76:1 or 1.85:1
Chronophotography
Frame from the trailer for The Robe (1953) with an aspect ratio of 2.35:1
CinemaScope
Aspect ratios: 2.35:1 to 2.66:1
Developed in the early 1950s by Earl Sponable, head of research at 20th Century
Fox, CinemaScope was made to easily let existing theaters retrofit their systems to
show widescreen movies. Based on the designs of Henri Chrétien, Sponable worked
with Bausch & Lomb to correct optical and functional defects in Chrétien's initial
designs. Although CinemaScope was capable of an aspect ratio of 2.66:1, the final
AR was reduced to 2.35:1 with the introduction of an optical soundtrack.
Although CinemaScope was last used in 1967, the term "scope" is still used by
projectionists and filmmakers to refer to any movie that utilizes anamorphic lenses
or with an aspect ratio of 2.35:1 or greater.
Notable titles: The Robe (1953), Guys and Dolls (1955), Lady and the
Tramp (1955), Oklahoma! (1955), Forbidden Planet (1956)
Woodcut of Cinéorama at 1900 Paris Exposition.Courtesy of Wikimedia.
Cinéorama
Cinéorama was an experiment for the 1900 Paris Exposition that involved 10
synchronized 70mm projectors that were arranged to provide a full 360°
experience simulating a hot-air balloon flight. The footage was recorded 400m
above the Tuileries Garden. The experiment was shut down after three days
because of fear of being a fire hazard due to the extreme heat of the arc lights
from the 10 projectors that were underneath the audience.
Although it was never shown again, it demonstrated the ability to have multiple
projectors in sync, which would be critical to formats like Cinerama and Polyvision.
Its direct successor, Disney's Circle-Vision 360°, was in use at various Disney
properties since 1955 but is now only used at EPCOT Center.
Cinerama
Aspect ratios: 2.59:1 to 2.65:1
Cinerama was the first widescreen format to be introduced after the Academy Ratio
became a standard in 1932. It involved projecting images from three synchronized
35mm projectors onto a deeply-arced screen. Although the final result had an
optimal aspect ratio of 2.65:1, no anamorphic lenses were used. Cinerama was one
of the first film formats to use magnetic media for audio, utilizing seven discrete
audio channels.
Cinerama made its debut with This Is Cinerama in 1952 at the Broadway Theatre in
New York. Although it was more of a technology demo than an actual movie, it was
the first time that people had the opportunity to see a widescreen movie since the
adaptation of the Academy ratio.
When the use of three cameras became unprofitable, films were often shot in Ultra
Panavision 70 which was then optically converted to a three-film Cinerama format
for theatrical playback.
Notable titles: How The West Was Won (1962), It's A Mad, Mad, Mad, Mad World (1963), 2001:
A Space Odyssey (1968)
IMAX 70m frame from The Dark Knight Rises. Courtesy of The New York
Times
IMAX
Aspect ratios: either 1.43:1 or 1.90:1
IMAX was developed in Canada in the late 1960s and early 1970s with the idea
that a large, single screen was a better viewing experience than multiple smaller
screens, particularly Cinerama. The original IMAX design uses 70mm film that is
shown horizontally with a massive 15 perforations per frame, giving it
approximately 6x the resolution of a traditional 35mm film frame. The average
IMAX screen size is approximately 72' x 50' (22m x 16m), which is significantly
larger than traditional movie screens of approximately 50' x 20' (16m x 6.1m).
IMAX also helped to popularize dome projection with the OMNIMAX at the San
Diego Hall of Science.
IMAX cameras are well-regarded by many filmmakers and are often used during
high-action scenes for greater clarity and impact.
Exmaple of a Super 35 frame.
Yellow = section used for 4:3 TVs
Red = section used for 2.35:1 movies
Image courtesy of Wikipedia
Super 35
Aspect ratios: 1.33:1 to 2.35:1
Super 35 is a film format that uses the same 35mm stock that is used in any other
format, except the space that is normally used by the soundtrack is also used.
Super 35 is also used to produce widescreen movies by cropping the visual frame
to the intended aspect ratio. The result would then be stretched as needed to fill
the 35mm frame for distribution. This allowed for a "grittier" look to the visuals
(compared to using anamorphic lenses) because the final result was derived from a
lower resolution.
Another key factor is that its use of flat lenses allows for certain kinds of scenes to
be filmed using forced perspective while keeping the intention of a widescreen
release. In The Lord of the Rings trilogy (2.35:1 AR), Peter Jackson used Super 35
because of several scenes that had both Frodo (Elijah Wood) and Galdalf (Sir Ian
McKellen). By placing Elijah Wood farther back in the frame, he appeared to be
smaller than Gandalf. This would not have been possible with anamorphic lenses.
Additionally, flat lenses allow the cameras to be smaller, which allows them to be
used in tighter areas like the fighter cockpits in Top Gun.
3-perf Super 35 (3 sprocket holes per frame) is popular with television shows
because it has a native 16:9 AR and because it removes the need for a final release
print.
Notable titles: Greystoke (1984), Top Gun (1986), The Abyss (1989), The Lord of the
Rings trilogy (2001-2003)
Some movies were presented in 70mm but were actually derived from the original
35mm, 8-perf anamorphic prints. Movies presented this way were marketed under
the name "Super Technirama 70".
First used with The Monte Carlo Story (1956), Technirama died in the late 1960s
with the exception of Disney's The Black Cauldron (1985), which was in Super
Technirama 70.
Notable titles: Sleeping Beauty (1959), Spartacus (1960), El Cid (1961), The Pink
Panther (1963)
Techniscope example of a positive print, showing two perfs per frame.
Courtesy of The American Widescreen Museum.
Techniscope
However, as per late film critic Roger Ebert: "The movie is shot in Techniscope, a
process designed to give a wide-screen picture while saving film and avoiding
payment of royalties to the patented processes like Panavision. In this film, as
in Harry Frigg, Techniscope causes washed-out color and a loss of detail. Universal
shouldn't be so cheap."
Notable titles: A Fistfull of Dollars (1964), The Good, The Bad, and the Ugly (1966), THX
1138 (1971), American Hustle (2013)
The 65/70 process was later used in Super Panavision 70, Ultra Panavision 70, and
IMAX.
Notable titles: Oklahoma! (1955), Around the World in 80 Days (1956), The Sound of
Music (1965), Patton (1970)
The chariot race from Ben-Hur showing the extreme 2.76:1 aspect ratio.
© 1959 MGM Productions
Ultra Panavision 70 was created through a joint production between MGM and
Panavision to compete with Fox's highly successful CinemaScope. Similar to Todd-
AO, Ultra Panavision 70 used the 65/70 method of processing the negative;
however, it utilized a new type of lens that used two prisms in addition to the
anamorphic lens. This minimized problems of actor close-ups that were
encountered by using regular anamorphic lenses. The result was an extremely wide
frame at 2.76:1 using a camera that was more easily focused and required less
light. Like Todd-AO, Ultra Panavision 70 utilized a six-track audio system.
Notable titles: Ben-Hur (1959), Mutiny on the Bounty (1962), The Hateful Eight (2015), Rogue
One (2016 using Ultra Panavision 70 lenses)
An example of a VistaVision frame from Alfred Hitchcock's Vertigo. Courtesy
of The American Widescreen Museum
VistaVision
Aspect ratio: 1.66:1 to 2:1
Created by Paramount in 1954, VistaVision utilized standard 35mm film but the
camera was mounted horizontally like Technirama and IMAX later on. This allowed
each frame to be captured with 8 perfs per frame resulting in a very high quality
print. It also allowed the film to be easily converted to standard 35mm formats.
Projection in the horizontal 8-perf format was restricted to special premieres
because of the need for special projectors. Traditional showings were done in
standard 35mm. The format was rendered obsolete in 1961 as higher quality film
stock was developed.
VistaVision cameras were later used for special effects, starting with the
original Star Wars, because of the high quality of the resulting shots. The higher
grain count of the 8-perf frames compensated for optical composition when the
various elements were brought together. Several movies from 1980 to 2012 used
VistaVision for special effects work, especially by Industrial Light & Magic.
Although CGI rendered VistaVision obsolete (again) by the start of the 21st century,
VistaVision cameras are still used on occasion when certain high-quality film shots
are needed.
Notable titles: White Christmas (1954), The Ten Commandments (1956), Vertigo (1958)
Please whitelist this site in your ad blocker! We do not have advertisements, but ad blockers could interfere with
Google Analytics.
No portion of this web site including commentaries and screen shots may be reproduced in any way without the
permission of John L. Berger. This includes distribution of any of the material to other web pages or any other
kind of media. Screen shots, video, and audio may not be used on any other web site, especially those that
plaster their own site with a ton of ads! Play fairly ... provide a link to this page instead.
Screen shots and any trademarks used on this web page are protected by copyright and are owned by their
respective copyright or trademark owners. widescreen.org is a not-for-profit endeavor.