Professional Documents
Culture Documents
High-Side Power Switch Ics Spf5017: (Surface-Mount 2-Circuit, Current Monitor Output Function)
High-Side Power Switch Ics Spf5017: (Surface-Mount 2-Circuit, Current Monitor Output Function)
10.5±0.3
7.5±0.2
Absolute Maximum Ratings (Ta=25ºC) b
2.0±0.2
Parameter Symbol Ratings Unit Conditions
1 10
Power supply voltage 1 VB 0 to 32 V
+0.15
1.27±0.25 0.4 –0.05
2.5±0.2
Power supply voltage 2 Vcc –0.5 to 7.0 V
+0.15
Power supply voltage 3 VB 0 to 40 V VB terminal, t = 1 min 0.25–0.05
Vsense+ –0.8 to 6
Current sensing voltage V a) Part No.
Vsense– Vsense+±Io • Rsense
b) Lot No.
Output terminal voltage VOUT –2 to 32 V
VPWM
Input terminal voltage –0.5 to 7.0 V
VHold
Output current IOUT 2.0 A Block Diagram (for one channel)
Power dissipation PD 2.4 to 5.0 W Depends on surface-mount board pattern Vcc
1
SFP5017
Storage temperature Tstg –40 to +150 °C VB
17
Channel temperature Tch 150 °C
clamp
D
Charge
OSC Pump
S
Sense
OUT
Electrical Characteristics (VB=14V, Ta=25ºC unless otherwise specified) – One circuit equivalent PWM
TSD OCP
MOS
19
2 Sense+
Ratings 70kΩ
18
Parameter Symbol Unit Conditions CMOS Logic
Sense
min typ max Hold lamp +
R
3
70kΩ – 20
Min. operating power supply voltage VB min 6 V Minimum operation of OUT terminal. Sense–
S/H
Operating power supply voltage 1 VB 10 14 16 V *1 5 S/H
Thermal shutdown operating temperature Ttsd 150 °C * Use a Schottky Di for D2 when the Sense+ terminal
is lower than the abs. max. rated voltage (–0.8V)
Operation circuit for current monitor output Io 0.2 1.2 A *1
0.2 V Io = 0A, Vcc = 5V
0.488 0.500 0.512 V Io = 0.2A, Vcc = 5V
Current monitor output voltage VSH
1.219 1.250 1.281 V Io = 0.5A, Vcc = 5V, Ta = –40 to 140°C
Timing Chart
2.925 3.000 3.075 V Io = 1.2A, Vcc = 5V, Ta = –40 to 140°C
Ordinary operation Thermal Ordinary operation Overcurrent Ordinary operation
(auto hold) protection (external hold) protection (auto hold)
5 mA Io = 1A, Vcc = 5V, VSH = 0V
Current monitor output current ISH
–6 mA Io = 1A, Vcc = 5V, VSH = 5V VPWM
t on 15 µs Vout
Output transfer time
t off 15 µs
Io = 0.5A, Vcc = 5V Icoil
Output rise time tr 100 µs
Output fall time tf 50 µs VS/H *1 *1 *2
Current monitor output hold time t sh 500 650 µs 500 to 650 500 to 650
Io = 0.5A, Vcc = 5V, usec usec