Professional Documents
Culture Documents
Communication BC-3000 Series
Communication BC-3000 Series
D.1 Introduction
The BC-3200 can transmit the sample data and QC data to an external computer (a host)
through its RS-232 serial port. The transmission can be conducted either automatically or
through the command of the operator after the completion of the sample analysis. This
section gives detailed discussion about the setup of transmission parameter, RS-232 serial
port and the data transmission format, therefore, providing detailed information for the
software engineers to program and for the user to conveniently perform transmission.
z When the communication symbol in the upper right corner of the screen
appears animated, it indicates the communication is in process.
D-1
Appendices
D.2 Connection
The BC-3200 can be connected with an external computer through a DB9 connector. The
pins of the DB9 connector are shown in Figure D-1.
Pin description:
DCD:Carrier Detect
RXD:Receive Data
TXD:Transmit Data
DTR:Data Terminal Ready
GND:Signal Ground
DSR:Data Set Ready
RTS:Request to Send
CTS:Clear to Send
RI:Ring Indicator
The BC-3200 communicates with a host through serial port 2, using Pin2, Pin 3 and Pin 5.
The maximum transmission distance is 12 meters.
D-2
Appendices
D.3.1 Description
Symbols
[ENQ] 0x05
[STX] 0x02
[EOT] 0x04
[EOF] 0x1A
[ETX] 0x03
[ACK] 0x06
[NACK] 0x15
"A" 0x41
"B" 0x42
"C" 0x43
"#" 0x30-0x39
"*" 0x2A
If the Lot No., Month, Day, Year are empty in QC Edit menu, the “*” (2A Hex) will be
transmitted to the host.
For all the data formats, if the data are marked “*”, then “*” (2A Hex) will be transmitted to the
host.
D-3
Appendices
Programming
If the Handshake is off, the BC-3200 will transmit the body of the text without acknowledging
the presence of an external computer.
If the Handshake is on, the BC-3200 will communicate with the external computer in following
procedures:
1. The BC-3200 sends an ENQ (05 Hex), then waits up to 4 seconds for the external
computer to respond. If the external computer does not respond, then one more ENQ
(05 Hex) is tried. If it fails again, the analyzer aborts the transmission and reports a
transmission error.
2. The external computer must respond by sending an ACK (06 Hex). If any other response
is received, another ENQ (05 Hex) will be sent by the analyzer (maximum two ENQ [05
Hex] will be sent) .
Body of text
EOT (04 Hex)
ETX (03 Hex)
4. Disconnection.
The BC-3200 sends an ETX 03 Hex), then waits 4 seconds for the external computer to
respond. If no response is received, one more ETX (03 Hex) is sent, the BC-3200 waits 4
seconds before giving up and gives alarm of communication error.
D-4
Appendices
If the external compute responds ACK, the transmission is done successfully. If the external
computer responds NACK(15 Hex), the analyzer repeat the transmission from step 3. If the
received response from the computer is neither ACK(06 Hex) nor NACK(15 Hex), the
analyzer sends ETX(03 Hex) again.
D-5
Appendices
RDW-SD[fL] ###.#
Reserved ############
Rm #
R1 #
R2 #
R3 #
R4 #
Pm #
Ps #
Pl #
L1 Region ###
L2 Region ###
L3 Region ###
L4 Region ###
L5 Region ###
L6 Region ###
L7 Region ###
L8 Region ###
Reserved ################
WBC Histo (256 channels) ###
RBC Histo (256 channels) ###
PLT Histo (256 channels) ###
Body of the text end
If handshake is activated [EOT]
If handshake is deactivated [EOF]
D-6
Appendices
Year ####
9
WBC[10 /L] ###.#
12
RBC[10 /L] #.##
HGB[g/L] ###
9
PLT[10 /L] ####
9
Lymph#[10 /L] ###.#
Lymph%[%] ##.#
9
Gran#[10 /L] ###.#
Gran%[%] ##.#
HCT[%] ##.#
MCV[fL] ###.#
MCH[pg] ###.#
MCHC[g/L] ####
9
WBC Limit[10 /L] ###.#
12
RBC Limit[10 /L] #.##
HGB Limit[g/L] ###
9
PLT Limit[10 /L] ####
9
Lymph# Limit[10 /L] ###.#
Lymph% Limit[%] ##.#
Gran# Limit[109/L] ###.#
Gran% Limit[%] ##.#
HCT Limit[%] ##.#
MCV Limit[fL] ###.#
MCH Limit[pg] ###.#
MCHC Limit[g/L] ####
Body of the text end
If handshake is activated [EOT]
If handshake is deactivated [EOF]
If handshake is activated [ETX]
D-7
Appendices
PLT[109/L] ####
9
Lymph#[10 /L] ###.#
Lymph%[%] ##.#
9
Gran#[10 /L] ###.#
Gran%[%] ##.#
HCT[%] ##.#
MCV[fL] ###.#
MCH[pg] ###.#
MCHC[g/L] ####
Body of the text end
If handshake is activated [EOT]
If handshake is deactivated [EOF]
If handshake is activated [ETX]
D-8
Appendices
D.4 Transmission
D-9
P/N: 3005-20- 44794(1.6)