Professional Documents
Culture Documents
Changes After D2 Masking Revised I
Changes After D2 Masking Revised I
Changes After D2 Masking Revised I
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
350
ROOM NAME :
630
WITH SHUTTER KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
2359
A DATE : February 18, 2022
B NOTE :
-All Dimensions in MM
-All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
KITCHEN TYPE: MODULAR unit will always be in
BWR/BWP Ply.
FLOOR KITCHEN HEIGHT 700mm
3. Shutter thickness - 17-20
FLOAT KITCHEN HEIGHT NA mm based on the core type
WITH SHUTTER 350 4.Carcass internal color in
STANDARD CARCASE DEPTH
cambric will have shutter
Change in Standard Depth to be 630 WITH SHUTTER backer as cambric only in case
Highlighted in Red ENTRY OF of laminate finish.
KITCHEN 5.There is no assurance of
BASE: 560mm grain matching for
WALL: 330mm wooden/texture finishes as the
TALL: NA NOTE - ALL BASE UNIT CARCASE BACK panels are cut based on
SHELF: NA SIDE ON LEVELERS AND FRONT SIDE optimization of material
AL FRAME DETAILS:
TAMBOUR UNIT: NA LEGS WILL BE VISIBLE
PROFILE TYPE:
LOFT BASE: NA Alpro silver with lipping with handle
CARCASE SPECIFICATIONS
BASE/TALL UNIT CORE DETAILS: WALL /LOFT UNIT CORE DETAILS: LOFT FRAME & SHUTTER DETAILS: HANDLE:
CARCASE: PL BWR PLY CARCASE: PL BWR PLY LOFT BASE CONCRETE: NA ITEM CODE SIZE QTY
LOFT BASE WOOD: NA BASE HL-H-CAH-160 BA 160 10
COLOUR: WHITE COLOUR: WHITE
SOFT CLOSE SHUTTERS: NA PULL OUT NA NA NA
CODE: 4SEB CODE: 4SEB
DESIGN CODE : WALL HL-H-CAH-160 BA 160 03
HINGES & DRAWER CHANNELS: TALL NA NA NA
SKIRTING HEIGHT: NA SOFT CLOSE SHUTTERS: YES 4SEB/ROUTED/ PLAIN 4SEB
SKIRTING COLOUR: NA EDGE/GROOVE LOFT NA NA NA
SOFT CLOSE DRAWERS: YES
NOTE: 1. GOLA KITCHEN WITH LAQUERED GLASS & WOODEN SHUTTER (WOODEN SHUTTER AT BASE AND WALL) WILL HAVE ALPRO SILVER WITH
LIPPING - WITHOUT HANDLE BY DEFAULT.
PAGE: 2 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
ELEVATION A
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
681 600 600 600 100
LEAD DESIGNER:
AKSHAY CHAKRAWAR
NSD Drawing QC Name:
M10 M9 M8 M7C1
600
600
M6C1 100 MM FILLER VIKRAM S
C1
M10C1 L CORNER UNIT DATE : February 18, 2022
681X610X600 REQUIRED
NOTE :
165 DEG CRANK HINGES
-All Dimensions in MM
600
V1 V1 V1 V1 -All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
40
COUNTERTOP THICKNESS
M3C1 M4C1 colours refer physical samples.
M2C1 2. In PLPB Kitchen, the Sink
350
350
M5C1 100 MM FILLER unit will always be in
BWR/BWP Ply.
700
M1C1 75MM FILLER
3. Shutter thickness - 17-20
C1 C1
mm based on the core type
350
350
4.Carcass internal color in
cambric will have shutter
100
backer as cambric only in case
100MM CIVIL SKIRTING
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
681 600 600 600 100
panels are cut based on
optimization of material
SHUTTER SPECIFICATIONS
HINGE
BASE/TALL UNIT SHUTTER DETAILS: WALL UNIT SHUTTER CORE: MISCELLANEOUS DETAILS: NAME COLORS CODE POSITION
SHUTTER: HDHMR SHUTTER: HDHMR LOFT SHUTTER: NA C1, V1 CAPPUCINIO HIGLOSS LS-HG-M-22137HGL HANDLE
OPEN SHELF: NA HINGE
BASE OPEN UNIT: NA WALL OPEN UNIT: NA
POSITION
GLASS COLOR: CLEAR CHIMNEY PANELING: NA
GLASS SHUTTER TYPE: AL. FRAME
WITH HANDEL HANDLE
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Internal Shelf Drawing QC Name:
- INTSHLF
VIKRAM S
EQ EQ
EQ
EQ EQ
AQUAGURAD UNIT colours refer physical samples.
2. In PLPB Kitchen, the Sink
EQ
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
EQ
of laminate finish.
5.There is no assurance of
grain matching for
EQ wooden/texture finishes as the
panels are cut based on
optimization of material
NOTE: 1.
2.
PAGE: 4 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
ELEVATION B
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
580 600 600 610 LEAD DESIGNER:
M10C1 L CORNER UNIT AKSHAY CHAKRAWAR
681X610X600 REQUIRED Drawing QC Name:
M15 165 DEG CRANK HINGES
M17 M16 VIKRAM S
V1
600
DATE : February 18, 2022
NOTE :
-All Dimensions in MM
600
V1 V1 V1 V1 -All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
40
COUNTERTOP THICKNESS colours refer physical samples.
M11C1 M12C1 M13C1 2. In PLPB Kitchen, the Sink
350
unit will always be in
BWR/BWP Ply.
700
V1 3. Shutter thickness - 17-20
C1 C1
M14C1 70MM FILLER mm based on the core type
350
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
100MM CIVIL SKIRTING of laminate finish.
5.There is no assurance of
grain matching for
580 600 600 610 wooden/texture finishes as the
panels are cut based on
optimization of material
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Internal Shelf Drawing QC Name:
- INTSHLF
VIKRAM S
EQ EQ
EQ EQ
EQ EQ
EQ EQ
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
NOTE: 1.
2.
PAGE: 6 VERSION 4.9
CLIENT NAME :
PLAN MR.ASHBEL
1184 CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
1624
NOTE :
-All Dimensions in MM
A -All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
746
colours refer physical samples.
ENTRY OF 2. In PLPB Kitchen, the Sink
BALCONY unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
580 WITH SHUTTER cambric will have shutter
backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
CARCASE SPECIFICATIONS
BASE/TALL UNIT CORE DETAILS: WALL /LOFT UNIT CORE DETAILS: LOFT FRAME & SHUTTER DETAILS: HANDLE:
PL BWR PLY NA LOFT BASE CONCRETE: NA ITEM CODE SIZE QTY
CARCASE: CARCASE:
LOFT BASE WOOD: NA BASE HL-H-CAH-160 BA 160 03
COLOUR: WHITE COLOUR: NA
SOFT CLOSE SHUTTERS: NA
CODE: 4SEB CODE: NA
HINGES & DRAWER CHANNELS: DESIGN CODE :
SKIRTING HEIGHT: NA SOFT CLOSE SHUTTERS: YES 4SEB/ROUTED/ PLAIN 4SEB
SKIRTING COLOUR: NA SOFT CLOSE DRAWERS: NO EDGE/GROOVE
NOTE: 1. GOLA KITCHEN WITH LAQUERED GLASS & WOODEN SHUTTER (WOODEN SHUTTER AT BASE AND WALL) WILL HAVE ALPRO SILVER WITH
LIPPING - WITHOUT HANDLE BY DEFAULT.
PAGE: 7 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
ELEVATION B
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
40
colours refer physical samples.
2. In PLPB Kitchen, the Sink
M18C1 180MM FILLER unit will always be in
BWR/BWP Ply.
M21C1 M20C1 M19C1 3. Shutter thickness - 17-20
700
mm based on the core type
4.Carcass internal color in
cambric will have shutter
M22C1 50MM FILLER backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
180 optimization of material
50 466 466 466
1450
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
EQ
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
EQ
EQ
panels are cut based on
optimization of material
Internal Shelf
- INTSHLF
NOTE: 1.
2.
PAGE: 9 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
NON-Standard Requirement Table KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Module no Module Type Non standard type NSD-Page No Descreption
Drawing QC Name:
M10C1 681X610X600 11 M10C1 L CORNER UNIT
L- WALL CORNER VIKRAM S
UNIT 681X610X600
LENGHT WILL BE CHANGED DATE : February 18, 2022
NOTE :
-All Dimensions in MM
-All Depths are Carcase Depths
Construction/Dimension 1. The colours in the drawing
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
HINGE
POSITION
HANDLE
HINGE
POSITION
HANDLE
LEAD DESIGNER:
M10C1 L CORNER UNIT AKSHAY CHAKRAWAR
681X610X600 REQUIRED Drawing QC Name:
165 DEG CRANK HINGES VIKRAM S
600
5.There is no assurance of
grain matching for
350
wooden/texture finishes as the
panels are cut based on
optimization of material
HANDLE
NOTE: 1.
2.
PAGE: 11 VERSION 4.9
CLIENT NAME :
APPLIANCES MR.ASHBEL
CLIENT ID :
ITEM SCOPE INSTALLATION BY SPECIFICATION Pun-A-3000762353
SIZE: NAME &SIZE ROOM NAME :
KITCHEN
HOB CUSTOMER
CUSTOMER
CUT SIZE: CUTTING DIMENSION LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
CUSTOMER NAME & CODE VIKRAM S
CHIMNEY CUSTOMER
DATE : February 18, 2022
NOTE :
-All Dimensions in MM
-All Depths are Carcase Depths
NAME & CODE
MICROWAVE CUSTOMER CUSTOMER 1. The colours in the drawing
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
OVEN NAME & CODE 3. Shutter thickness - 17-20
CUSTOMER CUSTOMER mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
of laminate finish.
HOMELANE/ HOMELANE/
NAME & CODE 5.There is no assurance of
DISHWASHER CUSTOMER CUSTOMER grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
HOMELANE SIZE: NAME &SIZE
SINK CUSTOMER CUTTING DIMENSION
BOWL SIZE: FLEXI PIPE: YES/NO
HOMELANE
NAME & CODE
TAP CUSTOMER
AQUAGUARD DIMENSION
CUSTOMER CUSTOMER
NOTE: 1.
2.
PAGE: 12 VERSION 4.9
CLIENT NAME :
KITCHEN COUNTER TOP 40 mm counter top MR.ASHBEL
CLIENT ID :
Pun-A-3000762353
630
ROOM NAME :
1877 KITCHEN
LEAD DESIGNER:
2135
AKSHAY CHAKRAWAR
NOSING DETAILS Drawing QC Name:
VIKRAM S
18
1. The colours in the drawing
are indicative. For actual
DRY BALCONY colours refer physical samples.
STRAIGHT EDGE 10 2. In PLPB Kitchen, the Sink
unit will always be in
30 BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
of laminate finish.
5.There is no assurance of
1250
NOTE: 1.
2.
PAGE: 13 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
DADO TILES
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
600
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
18 SQ.FT of laminate finish.
DADO TILE 5.There is no assurance of
AREA grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
DADO TILES
TYPE: CERAMIC
SUPPLY: CUSTOMER
INSTALLATION: HOMELANE
COLOUR: N/A
NOTE: 1.
2.
PAGE: 14 VERSION 4.9
CLIENT NAME :
MR.ASHBEL
DADO TILES
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
600
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
18 SQ.FT cambric will have shutter
DADO TILE backer as cambric only in case
AREA of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
DADO TILES
TYPE: CERAMIC
SUPPLY: CUSTOMER
INSTALLATION: HOMELANE
COLOUR: N/A
NOTE: 1.
2.
PAGE: 15 VERSION 4.9
CLIENT NAME :
OTHER SERVICE MR.ASHBEL
CLIENT ID :
ITEM HOMELANE SCOPE CUSTOMER SCOPE Pun-A-3000762353
ROOM NAME :
KITCHEN
PAINTING NA NA LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
HOME NA NA
AUTOMATION -
SMITCH
NOTE: 1.
2.
PAGE: 16 VERSION 4.9
CLIENT NAME :
STANDARD CONSTRUCTION DETAILS (HANDLE KITCHEN)NOT TO BE EDITED MR.ASHBEL
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
50
NOTE:
HORIZONTAL HANDLES
TO BE FIXED AT 50MM
FROM TOP
CLIENT ID :
vertical grain laminted selected for Pun-A-3000762353
chimney covering panel will have
ROOM NAME :
grain direction running horizontally
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
50
NOTE:
HORIZONTAL HANDLES
TO BE FIXED AT 50MM
FROM TOP
Vertial panel with vertical grain laminate - Horizontal panel with vertical grain laminate - Back
All panels will be vertical horizontal panel will have grain direction running
horizontally and side verticla panles will have grain running
vertically PAGE: 18 VERSION 4.9
CLIENT NAME :
STANDARD CONSTRUCTION DETAILS (HANDLELESS KITCHE)NOT TO BE EDITED MR.ASHBEL
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
CLIENT ID :
Pun-A-3000762353
ROOM NAME :
KITCHEN
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S
A-To be used only in the top. Note: The grains between panels next to
each other may or may DATE : February 18, 2022
not match depending on the optimization
B-To be used below the NOTE :
-All Dimensions in MM
cabinete. KITCHEN DRAWER -All Depths are Carcase Depths
NORMAL LAMINATE HORIZONTAL GRAIN
Blown up Note :Except for float 'L' LAMINATE
1. The colours in the drawing
are indicative. For actual
view Corner, rest all float cabinet colours refer physical samples.
2. In PLPB Kitchen, the Sink
construction remains same unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
Atlas mm based on the core type
Bracket Note: The grains between panels
4.Carcass internal color in
cambric will have shutter
next to each other may or may backer as cambric only in case
not match depending on the of laminate finish.
optimization
5.There is no assurance of
Blown up view grain matching for
Atlas Hardware Bottom Support RIPPER ON TOP OF THE UNIT
wooden/texture finishes as the
used panels are cut based on
optimization of material
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
Atlas Bottom VIKRAM S
Support Note: The grains between panels next to
each other may or may DATE : February 18, 2022
not match depending on the optimization
NOTE :
KITCHEN DRAWER -All Dimensions in MM
-All Depths are Carcase Depths
NORMAL LAMINATE HORIZONTAL GRAIN 1. The colours in the drawing
LAMINATE
are indicative. For actual
SINK UNIT Without Bottom colours refer physical samples.
SINK UNIT With Bottom 2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
Note: The grains between panels next to cambric will have shutter
each other may or may backer as cambric only in case
not match depending on the optimization of laminate finish.
5.There is no assurance of
grain matching for
RIPPER ON TOP OF THE UNIT
wooden/texture finishes as the
panels are cut based on
Bottom Ripper, optimization of material
No Back Panel
Atlas Back
Blind Corner Unit Support
Bottom Panel,
No Back Panel
18 mm thick
horizontal ripper of
100 mm each on
front and back of
the unit
LEAD DESIGNER:
AKSHAY CHAKRAWAR
Drawing QC Name:
VIKRAM S