Professional Documents
Culture Documents
X64-Cl Ipro Driver For Sapera LT Imaging Library Windows 2000/Xp/Vista
X64-Cl Ipro Driver For Sapera LT Imaging Library Windows 2000/Xp/Vista
Fixes
- Changed maximum white balance gain to 4.99
- Fix buf with flatline and line size > 2KB
- Fix Bayer with Flatfield correction
- Fix flatfield capability in xfer
- Optimize PC utilization when calling callback functions (problem when number of buffers
> 5000)
- Fix support for planar merge line
- Fix bug in CXM, reading in registry failed -> cordevicemanager was always asking to
update the board
- Changing the Cycling mode while the Xfer module is connected anb number of buffer >
127
- Added support 2 tap colors camera with lut
- Fix bayer conversion when Xfer exceed PCI bandwith, the transfert would stop.
- Fix vertical back invalid, the first line was shifted by 1 pixel
- Fix 10-bit 2 or 4 taps alternated from right to left into mono 8 buffers
- Fix snap in linescan, no frame acquired under certain conditions
- Fix color 12 bits
- The serial communication would stop when the first Sapera application is executed.
- Change bayer WB gain for blue channel to 1-9
- Fix Grab stop when the external trigger is enabled and a trigger is pending, one frame
will be captured atfer the grab stops.
- Improve board bandwidth when 2 cameras configured as 2 taps interleaved are used.
- Fix many problems with serial port.
- Fix line integration pulse jitter
- Fix crop top for images bigger than half the internal memory
- Increase serial port Rx fifo to 2KB.
- Unplugging the camera cable on the 2nd camera could cause an image shift.
- Serial port baud rate was not accurate at 115200 bps.
- Simplified update of driver on 1st bootup after installation of the driver.
- Color LUT was not available.
- Unplugging the camera #2 could cause the image to shift by 4 pixels
- Fix problem with PCI interrupt pin
- Serial port on 2nd camera was not functional
- Fix image desynchonization when disconnecting and then connecting the camera cable
while grabbing
- Fix remove cancel button in CorDeviceManger when run from pc bootup
- CorXferSelect would select the wrong buffer if buffer index >= 127
- External frame trigger count was not accurate.
- Fix FFC for line bigger than 8KB
Version 1.20
Never Released