Professional Documents
Culture Documents
UL Certificate of Compliance All SFRMs May 2019
UL Certificate of Compliance All SFRMs May 2019
UL Certificate of Compliance All SFRMs May 2019
Standard(s) for Safety: ANSI/UL 263, "Fire Tests of Building Construction and
Materials,"
ANSI/UL 1709, "Rapid Rise Fire Tests of Protection
Materials for Structural Steel."
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up
Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 5
CERTIFICATE OF COMPLIANCE
Certificate Number 20190507-R13348
Report Reference R13348
Issue Date 2019-May-07
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
Types DC/F, HP, II or II HS Spray-Applied Fire Resistive Materials investigated for exterior use in:
Floor-Ceiling Design Nos. A811, A815, D814, D816, D822, D824, D825, D826, D827, D829, D830, D831,
D832, D833, D835, D836, D837, D840, D846, D847, D858, D859, D860, D861, D862, D865, D867, D868,
D871, D902, D904, D908, D913, D914, D919, D921, D924, D926, D942, D947, D974, D977, D984, D988,
D991, E701, E702, E706, G801, G802, G805, G809, J801, J803, J804, J805, J809, J957 and
Roof-Ceiling Design Nos. P301, P801, P807, P810, P811, P812, P815, P819, P822, P825, P826, P901, P902,
P907, P908, P920, P922, P923 and
Beam Design Nos. N803, N804, N805, N814, N815, N816, N820, N823, N824, N825, N826, N830, N860,
N868, N869, S801, S802, S803, S805, S806, S812 and
Types CP-2, P-20 Spray-Applied Fire Resistive Materials for use in:
Floor-Ceiling Design Nos. D759, D860, G705, J708, J710, J804, J805, J809.
Floor-Ceiling Design Nos. D755, D902, D974, D976, D977, J708 and
Roof-Ceiling Design Nos. P713, P901, P902, P907, P908, P920, P922, P923 and
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 5
CERTIFICATE OF COMPLIANCE
Certificate Number 20190507-R13348
Report Reference R13348
Issue Date 2019-May-07
Types 304 and 404 Spray-Applied Fire Resistive Materials for use in:
Types 300, SB, 300AC, 300ES, 300HS, 300N, 3000, 3000ES, 400AC, 400ES Spray-Applied Fire Resistive
Materials for use in:
Floor-Ceiling Design Nos. D759, D797, D799, D859, D860, D902, D904, D921, D942, D947, D974, D976,
D977, D984, D988, D991, G705, G717, J708, J710, J804, J805, J809, J957, L701 and
Roof-Ceiling Design Nos. P301, P675, P676, P719, P723, P744, P752, P826, P901, P902, P907, P908, P920,
P922, P923 and
Beam Design Nos. N735, N743, N759, N761, N792, N869, N873, S721, S729, S751 and
Types 300, SB may be trowel-applied provided the materials are first mixed and pumped through standard
application equipment as outlined in the manufacturer's application instructions. The minimum thickness and
minimum in-place density of the Types 300 and SB stated in the individual designs shall be maintained.
Types 300AC, 300ES, 300HS, 3000, 3000ES, 400AC, 400ES must be used with Type Isolatek Qwik-Set®
accelerator in accordance with the manufacturers mixing instructions. Types 300, SB, and 300N may optionally
use Type Isolatek Qwik-Set® accelerator.
Floor-Ceiling Design Nos. D759, D799, D859, D860, D902, D904, D921, D942, D947, D974, D976, D977,
D984, D988, D991, G705, G717, J708, J710, J804, J805, J809, J957, L701 and
Roof-Ceiling Design Nos. P675, P676, P719, P723, P744, P752, P826, P901, P902, P907, P908, P920, P922,
P923 and
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 3 of 5
CERTIFICATE OF COMPLIANCE
Certificate Number 20190507-R13348
Report Reference R13348
Issue Date 2019-May-07
Beam Design Nos. N735, N743, N759, N761, N792, N873, S721, S729, S751 and
Type 400 may be trowel-applied provided the materials are first mixed and pumped through standard
application equipment as outlined in the manufacturer's application instructions. The minimum thickness and
minimum in-place density of the Type 400 stated in the individual designs shall be maintained.
Type 800 Spray-Applied Fire Resistive Material investigated for exterior use in:
Types M-II, TG Spray-Applied Fire Resistive Materials investigated for exterior use, and additionally evaluated
for acid and solvent spray exposure in:
Floor-Ceiling Design Nos. D744, D759, D781, D799, D902, D922, D974, D976, D977, D988, G717, J809 and
Roof-Ceiling Design Nos. P720, P721, P819, P826, P908, P922 and
Beam Design Nos. N742, N743, N755, N759, N760, N761, N792, S720, S723, S751 and
As an alternate to spraying, Type M-II may be machine mixed and trowel applied as an alternate to spraying.
The minimum thickness and minimum in-place density of the Type M-II stated in the individual designs shall be
maintained.
Type M-II/P Spray-Applied Fire Resistive Material investigated for exterior use, and additionally evaluated for
acid and solvent spray exposure in:
Beam Design Nos. N742, N743, N759, N761, N792, S751 and
Column Design Nos. X764, X768, XR704, XR723, XR725, XR729, XR730, XR739.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 4 of 5
CERTIFICATE OF COMPLIANCE
Certificate Number 20190507-R13348
Report Reference R13348
Issue Date 2019-May-07
As an alternate to spraying, Type M-II/P may be machine mixed and trowel applied as an alternate to spraying.
The minimum thickness and minimum in-place density of the Type M-II/P stated in the individual designs shall
be maintained.
Types D-C/F, II, II HS, HP, 300, SB, 300AC, 300ES, 300HS, 300N, 3000, 3000ES, 400AC, 400ES and 400
Spray-Applied Fire Resistive Materials for application with or without Type EBS or Type X adhesive/sealer.
Refer to specific Design to determine if Type EBS or Type X adhesive/sealer is required. For information on
Type EBS or Type X adhesive/sealer refer to Adhesives category (BYWR), Isolatek International.
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 5 of 5