Professional Documents
Culture Documents
Dell Training - Integrated Storage Module: Poweredge R710 (2S 2U)
Dell Training - Integrated Storage Module: Poweredge R710 (2S 2U)
Dell Training - Integrated Storage Module: Poweredge R710 (2S 2U)
Pre-Removal Instructions
2. Establishing image.
Integrated Storage Module
Integrated Storage Module
3. If necessary, disconnect the RAID battery cable from the controller.
Integrated Storage Module
4. Disconnect the Serial Attached SCSI (SAS) cable(s) from the storage-controller card.
Integrated Storage Module
5. Disconnect the SAS cable(s) from the storage-controller card.
Integrated Storage Module
6. Bend both card-edge guides outward and pull the storage-controller card out of the connector.
Integrated Storage Module
7. Bend outward on both card-edge guides to release the controller. Lift the side of the controller that is adjacent to the blue guide.
Integrated Storage Module
8. Remove the controller from the system.
Integrated Storage Module
9. Complete.
Previous Next
Copyright 1999-2013 Dell Inc. For Dell Employees and Dell Service Providers only.
Privacy Policy - About Dell - Contact Us Top