Professional Documents
Culture Documents
20Cs2008L - Computer Networks: Dynamic Routing - Ospf
20Cs2008L - Computer Networks: Dynamic Routing - Ospf
20Cs2008L - Computer Networks: Dynamic Routing - Ospf
Ex No: 7
DYNAMIC ROUTING - OSPF
Date: 13/02/2022
AIM: To enable dynamic routing for the given topology using OSPF and test the connectivity.
COMMANDS:
Router(config)# router ospf process_ID
Router(config-router)# network IP_address wildcard_mask area area_#
PROCEDUE:
Step 1: Configure OSPF on R0, R1 AND R2.
Step 2: Verify OSPF neighbours and routing information.
Step 3: Verify OSPF protocol settings.
Step 4: Verify OSPF process information.
Step 5: Verify OSPF interface settings.
Step 6: Verify end-to-end connectivity.
TOPOPLOGY DIAGRAM:
39
20CS2008L – COMPUTER NETWORKS URK20CS2065
ADDRESSING TABLE:
DEFAULT
DEVICES INTERFACE IP ADDRESS SUBNET MASK
GATEWAY
40
20CS2008L – COMPUTER NETWORKS URK20CS2065
OUTPUT:
ROUTING TABLE OF R0
41
20CS2008L – COMPUTER NETWORKS URK20CS2065
ROUTING TABLE OF R1
ROUTING TABLE OF R2
ROUTING TABLE OF R3
42
20CS2008L – COMPUTER NETWORKS URK20CS2065
43
20CS2008L – COMPUTER NETWORKS URK20CS2065
VIDEO: https://youtu.be/3TnWMXCQ8Lc
RESULT: Dynamic routing using OSPF protocol is done for the given topology and intended
output is obtained successfully.
44