Professional Documents
Culture Documents
Horti-Crop Production LM (Repaired)
Horti-Crop Production LM (Repaired)
Page 1
ACKNOWLEDGEMENT
NOTE:
All pictures and graphic illustrations taken from the internet are properties of the
original owners and are used only as supplemental materials for educational purposes.
Page 2
Technology and Livelihood Education
Agriculture and Fishery Arts – Horticulture &Crop Production
INTRODUCTION
OBJECTIVES
Page 3
PRE-ASSESSMENT
3 2 1
1. Using farm tools and equipment.
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
2. Selecting farm site
How much do I know about this?
How skilled am I in applying this?
How interested am I in learning more about this?
3. Preparing land
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
4. Planting methods
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
5. Applying fertilizer
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
6. Weeding
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
Page 4
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
9. Harvesting crops
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
10. Marketing produce
How much do I know about this?
How skilled am I in using this?
How interested am I in learning more about this?
LEARNING GOALS/TARGETS
My Goals:
_______________________________________________
My Targets:
_______________________________________________
Page 5
CROP PRODUCTION
Lesson 1
FARM TOOLS AND EQUIPMENT AND THEIR MAINTENANCE
What to know
You are now about to learn the basic knowledge and
skills in Horti-Crop Production. Good luck!
Activity # 1
Below are some of the farm tools and equipment in agricultural crop production. Draw a
smiling face if the tool is familiar to you and a sad face if it is not in the opposite
box under remarks. Put a if you know how to use it and if you don’t in the
next box. x
Remarks
Farm Tools and Equipment
I know it I can use it
1. Spade
2. Hand Fork
3. Rake
4. Wheelbarrow
5. Sickle/scythe
6. Bolo
7. Dibber or dibble
8. Shovel
9. Pruning shear
10. Sprayer
11. Spading fork
12. Hand trowel
13. Sprinkler
14. Grub hoe
15. Pick mattock
Page 6
Activity # 2
Choose three of the given farm tools and equipment in Activity 1 which you are familiar
with. Describe your experiences in using each of them.
1. _________________________________________________________
2. _________________________________________________________
3. _________________________________________________________
Farm tools and equipment play a very important role in every farm practice and
operation. Hence, as a learner you should be able to know, identify, and learn their uses
to become a successful farmer someday.
A. Hand Tools
Hand tools are the most simple tools since they are used with your bare
hands in performing farm operation and practices in a small farm or vegetable
garden in the backyard or in school.
Page 7
Hand trowel is a gardening tool which
is used for loosening the soil, digging
small holes, transplanting seedlings
and other similar task.
Page 8
Spading fork is a gardening tool with
a handle and strong tines which is
used for loosening the soil, digging out
root crops and turning over the
materials in a compost heap.
Wheelbarrow is a hand-propelled
vehicle used for hauling trash, manure,
fertilizers, planting materials and other
equipment.
Page 9
Pail or can is a container used for
hauling soil, compost, chemical
fertilizer and even water.
B. Farm Implements
These are accessories which are pulled by working animals or mounted
machineries (hand tractor, tractor) and which are usually used in the preparation
of land. These are usually made of a special kind of metal.
Page 10
Harrow. The native wooden harrow is
made of wood with metal teeth and
pulled by a carabao, while the disc
harrow is made of metal mounted to a
tractor. Harrows are used for tilling and
pulverizing the soil.
C. Farm Machinery
1. Combined Harvester - is a machine which is used in
harvesting grain crops. It is the combination of harvesting—
reaping, threshing, and winnowing. It is one of the most economically
important labor-saving inventions, enabling a small fraction of the
population to be engaged in agriculture.
Visit http://www.youtube.com/watch?v=n5KnL2Td4xc to view how combine
harvester works.
2. Hand Tractor
3. Four wheeled hand tractor
What to process
Activity # 1
Your group is tasked to prepare a vegetable garden at the back of your classroom. You
and your friend are assigned to get the tools and equipment in the tool room that will be
Page 11
needed for the task. List down the tools and equipment that you will get and explain how
each one isused in accomplishing the job.
Point
Able to list down and explain the uses of all the needed tools in accomplishing
5
the task
Able to list down and explain the uses of 90%-99% of all the needed tools in
4
accomplishing the task
Able to list down and explain the uses of 80%-89% of all the needed tools in
3
accomplishing the task
Able to list down and explain the uses of 70%-79% of all the needed tools in
2
accomplishing the task
Able to list down and explain the uses of 69% below of all the needed tools in
1
accomplishing the task
Activity # 2
Page 12
B. Spade
C. Shovel
D. Wheelbarrow
Activity # 3
List down the common tools and equipment and do a research on how to
maintain them. You may go and visit the school library or surf the internet.
Write your output in your notebook.
Activity # 4
Activity # 5
Activity # 1
A video presentation of how each of the following tools and equipment are used will be
shown to you. Observe carefully how each tool is used. You need to make a story of
what you have seen which may answer the following questions:
1. What is the video presentation about?
2. How was each tool used in the presentation?
3. Why is it important to know the different tools and equipment and how to use
them?
Page 13
4. Was there an application of appropriate safety measures while using the tools or
equipment and while working in the farm?
What to transfer
Activity # 1
Your school, Leuteboro National High School, is a participant in the “Search for
Best Gulayan sa Paaralan Implementers”. The cluster evaluation to choose the cluster
winner will be in the month of November to choose the cluster winner. As the school
level TLE President, you need to visit the existing vegetable garden in the school and
take note of the things in order to improve, develop and produce vegetables before the
visitation. Make a project plan on how to address your findings and perform the needed
action by using the appropriate tools in the implementation of the plan.
Page 14
Lesson 2
SELECTION OF SITE
What to know
You’re doing fine now. After knowing the farm tools and
equipment, continue the lesson in selecting the site.
Activity # 1
Given the scrambled letters below, rearrange them to get a word or a group
of words related to factors in selecting the site. Write your answer opposite each item.
1. YOPHTPGROA - __________________________
2. LOSI PTYE - __________________________
3. ESCLIBACSTIYI- __________________________
4. FANLRILA - __________________________
5. ERTAW PLUSYP - __________________________
Page 15
5. Water supply – this refers to both distribution and amount of water for
irrigation.
6. Socio-economic consideration – these determine the profitability of the
enterprise.
a. Peace and order situation
b. Cost and availability of labor
c. Prevalence of infectious diseases
d. Price of land
What to process
Activity # 2
Make an interview with an experienced crop producer in the locality on how he
selects the site for his crop production. The results of the interviewwill be discussed in
class to answer the following questions.
1. What are the factors to consider in choosing the location of your farm?
2. Why is it necessary to consider such factors?
3. How do these factors affect your production?
Activity # 1
Visit a farm in your locality and observe its location. Make a report about the
description of the farm you have visited. Draw the farm site. Is the place suited for crop
production? Why or why not? If you were the owner of the farm, would you choose the
same site? Why or Why not?
Page 16
What to transfer
It’s your turn now. Show off what you’ve learned.
Activity # 1
Page 17
Lesson 3
LAND PREPARATION AND PLANTING METHODS
A. Land Preparation
What to know
Activity # 1
Agri-Puzzle
L A C O M P O S T P
A N D P E L I T I A
N S C B E T H D L P
D H L S H A N E L A
I S E R E S T Y I N
N H A R R O W I N G
E A R M A I M A G N
V N I A N L E P I E
T L N E E L N A H S
A E G S H E R W I N
Picture/Illustration Steps
1. Clearing – clear the area of weeds, humps,
rocks, and other debris by using bolo,
scythe, and other tools needed. A clean
area will make planting, weeding, and
fertilizing easier.
Page 18
2. Tilling – till the soil by plowing or by using
light hoe or pick mattock depending upon
the physical condition of the soil. This is
done to eradicate weeds, to help the plant
roots penetrate deeper into the soil for more
nourishment and better anchorage. Other
barriers for plant growth are also removed.
Tilling is done at the beginning of the rainy
months.
Activity # 1
Demonstrate the steps in preparing the land. You will be rated using the rubric
below.
4 3 2 1
Clearing
Tilling
Harrowing
Applying
compost
Layouting
Activity # 1
1. Mang Rolly is a beginner farmer preparing his farm for crop production. Help
him explain the steps in preparing the land by filling up the ladder from step 1 to
step 5?
5
Page 20
4
What to transfer
Activity # 1
Mang Rolly is not able to get your explanation of the steps in preparing
the land. He asks you if you can demonstrate the steps to him. In the previous
lesson, you have already identified the best site for your vegetable garden,
demonstrate now the steps in preparing the land in the presence of Mang Rolly.
Page 21
Your performance will be rated using the following rubric:
5
Able to demonstrate properly all the steps in preparing the land
Able to demonstrate properly only three of the steps in preparing
4
the land
Able to demonstrate properly only two of the steps in preparing
3
the land
Able to demonstrate properly only one of the steps in preparing
2
the land
Was not able to demonstrate any of the steps in preparing the
1
land
B. Planting Crops
Mensuration and Calculation
What to know
2. Fully matured - a mature seed comes from a ripe and mature fruit which has
grown from a healthy plant.
3. Fresh - its germinating power must be preserved.
4. True to type - this means the seeds are not mixed with other varieties.
Page 22
5. Free from seed-borne disease
6. Damage-free
7. Free from weed seeds and other foreign matter.
After inspecting the seed box, you find that only 85 seeds germinated out of 100
seeds that you have sown. The percentage of germination will be
Percentage of germination=
Page 23
Percentage of germination = 85%
This means that only 85 percent of the total number of seeds germinated.
To calculate the exact amount of seeds needed to plant a hectare, use the
following formula:
Where:
Example:
The recommended seeding rate of pole beans is 35 kg per hectare and the
percentage of germination is 85. The new seeding rate will be;
Activity # 2
Mang Kimho sowed 50 seeds. After inspecting the seed box you find that only 35
seeds germinated out. What is the percentage of germination using the formula below:
Percentage of germination=
Page 24
Methods of planting:
1. Direct planting means that the seeds are
planted directly in the field where they will grow
permanently up to harvesting. This is usually done to
plants with big seeds such as beans, corn, peanuts,
okra, patola, upo and ampalaya. Many big farms and
commercial growers use this method to make the
work easy.
However, if seedlings sown in direct planting
exceed the normal number of plants per hill,
thinning is done. Thinning is the removal of excess
seedlings, which germinated or are spaced too
closely for better growth. Seedlings thinned out can
be used as replacement. In the case of seedlings planted in seedboxes or seedbed,
pricking-off can be applied. Pricking-off means planting apart to give the seedlings
greater space in which to grow prior to transplanting in the field especially if they sprout
too close to each other.
Transplanting
Transplanting is done when
seedlings have attained 12 -15 cm in
height and 3 – 4 leaves have developed.
Page 25
2. Pull the seedlings carefully without shaking off the media from the roots.
3. Plant the seedlings immediately to prevent the roots from drying out.
4. Gently press the soil around the roots.
5. Water the seedlings at the soil surface with a gentle stream of water to settle the
soil around the roots.
Activity # 3
Activity # 4
1. How many seedlings will you need to plant tomato in your 500 sq.m. area if
the distance of planting is 50 X 100 cms.?
2. If you have 100 sq. m. lot, how many seedlings of cabbage will you need
following 50 X 76 cms . as the distance of planting?
3. What must be the distance of planting if you have 100 seedlings in order to
plant your 25 sq. m. garden?
Activity # 3
Below are pictures of different crops. Write DP if the method of
planting for the said crop is direct and IP if it is indirect opposite each photo.
Page 26
What to process
Activity # 1
How do you differentiate direct seeding from indirect planting?
______________________________________________________________________________
How do you differentiate thinning out from pricking off of seedlings?
_____________________________________________________________________________
Activity # 1
Page 27
A B
Using the illustrations above, answer the following questions.
1. Which picture shows that vegetable plants can attain their right size abundantly?
Why?
___________________________________________________________________
___
What to transfer
Tools Needed:
1. Prepare a plan for a vegetable garden. Design the location of different plants
based on available space. Add rows and beds in the garden separated by narrow
paths through which you can walk. Make sure the beds are not wider than 3 feet
and 6 feet long.
2. Clear the land of stones, rocks, and plant debris. Make sure it has well-drained
soil and receives at least six hours of direct sunlight every day.
3. Test the soil to determine the pH value that provides the indication of the
amounts of nutrients like nitrogen, phosphorous, and potassium present. Do this
by sending a sample to your local DA (Department of Agriculture ) officer. The
result will tell you if you need to add fertilizer.
4. Dig the soil with light hoe, shovel, or pick mattock to a depth of 6 to 8 inches.
Pulverize after by using a hand trowel, bolo or hand cultivator.
5. Spread 2 to 3 inches of organic compost or well rotted manure over the area.
Rake the area to ensure the organic fertilizer be mixed with the soil.
Page 28
Your performance will be rated using the following rubric:
Materials needed:
Seedbox, 1 sachet of eggplant seeds (1/20 K),sand, compost, loam soil, water, net
Procedure:
Page 29
Able to demonstrate properly one - three of the procedures in the
2
activity
1 Was not able to demonstrate any of the procedures in the activity
Activity # 3
What are the things to consider in using the tools in the garden?
Activity # 4
Write the Do’s and the Don’t’s in the use of tools to ensure
safety?
Lesson 4
CULTURAL REQUIREMENTS
What to know
How are plants maintained in order to attain their optimum
growth? Find out.
Page 30
C. Sub-surface
D. Surface
3. What is surface irrigation?
A. Water flows along furrows.
B. Water drops like simulated rain.
C. Water drops in perforated tube.
D. Water is supplied through submerged.pipes.
4. What is the best definition of fertilizer?
A .Large amount of substances or nutrients needed by plants
B. Small amount of substances or nutrients needed by plants
C. Substances that come from decayed plants
D. Organic or inorganic material added to soil to improve soil fertility
5. Green manuring refers to:
A. leguminous plants that are plowed under to serve as fertilizer when
decomposed.
B. applying chopped green leaves in the field.
C. collecting green colored animal manure to fertilize the field.
D. letting the rice straws decomposein the field.
Page 31
A. Applying fertilizer
Fertilizer is any organic or inorganic material that is added to soil to supply
nutrients essential to the growth of plants. A good fertilization program strives to
maintain the current supply of nutrients to optimum levels and in correct proportion
for economical production. It is achieved by proper timing and rate of application;
thus, gives assurance for better yield of the crops.
The amount and kind of fertilizer to be added to the soil depends primarily
upon:
1. The nutrient requirement of the crop, and
2. How much nutrient the soil can apply
2. Side-dressing or
growing in the field.
Page 32
3. Potassium – for better leaves, stems, flowers. It also produces bigger
and heavier fruits.
Fertilizers especially inorganic should be applied in the right amount and
at the proper time or else they will defeat the purpose.
B. Weeding
Weeds are enemies of plants. They lower crop yield and compete with
crops for light and carbon dioxide and water and soil nutrients as well.
Kinds of weeds:
1. Grasses
2. Sedges
3. Broad leaf weeds
Page 33
2. Pumping – a system of irrigation that uses a pump to draw water either from a
nearby stream or a ground water supply.
Methods of irrigation
1. Surface irrigation – the water is
applied on the surface of the soil
either in furrows or by flooding.
This is the most economical
method of irrigation.
Page 34
D. Crop Protection
1. Insect pests cause great damage to crops. They chew, suck and lap the
leaves, flowers and fruits hence decreasing the yield and quality of produce.
They also transmit disease to man and crops as well.
Beetles ( Coleoptera)
Page 35
Aphids, hopper and mealy bugs
(Homoptera)
Ants (Hymenoptera)
Control methods:
a. Cultural methods
Use of resistant varieties
Use of hand picking
Use of botanical insecticides
Use of crop rotation
Use of intercropping
b. Chemical method
c. Biological method
Use of trap plants ex. Amarillo
Use of plant attractants ex. Basil (amaranth),
sunflower, cosmos, zinnia
Safety measures in using chemicals:
a. Use least hazardous products
b. Dispense and mix chemicals in well-ventilated areas
c. Use appropriate PPE (Personal Protective Equipment)
2. Diseases
Page 36
Disease is more detrimental than insect pest. Its presence is unnoticed at
first but when noticed, it is already in its advanced stage. Detection of the
causal organism is not easy as well; hence, controlling the disease is not
easy.
Plant disease is either parasitic or non-parasitic.
1. Parasitic diseases are due to:
Fungi Nematodes
Bacteria Virus
Common diseases:
Downy mildew in
Blossom – end rot of
cucurbits
tomato
Cucumber mosaic
Pre-emergence virus in tomato
damping-off seedlings
Post – emergence:
rapid rotting at the base Fruit rot in eggplant
of the enlarged seedling
causing it to fall
Page 37
Leaf blight
Bacterial spot in pepper
What to process
Activity # 1
2. If water is not available in the farm area, what are you going to do to obtain it
and how?
What are the precautionary measures in the application of insecticides and other
chemicals in the farm? Write your answers in your notebook.
Activity # 1
Watch a video presentation showing the different cultural practices in crop
production. Make a web concept map on how well you understand what you have seen.
Page 38
Be guided by the questions given below. You may use a similar web concept map
below.
Activity # 2
Analyze the situation and give your best solution to the problem.
Your friend Sherwin owns a hectare of land which is planted with vegetables. He
told you that he noticed different insects in his farm aside from some of the affected
parts of the vegetables.
What to transfer
Activity # 1
Page 39
Visit a vegetable garden in the locality and observe the cultural
practices done by farmers. If possible try out some of their practices. Make a
scrap book containing the cultural practices in the farm. It must have pictures and
descriptions
Activity # 2
Maintain a vegetable garden in the school and at home. Apply the different
cultural practices. Make a report on the activities done and the results.
Page 40
Lesson 5
HARVESTING AND MARKETING
What to know
A. Harvesting
Page 41
Page 42
B. Marketing
4 M’s of Production
a. Manpower – This is by all means the most important resource in production. If you
have good people you can make saleable products.
b. Machine- After acquiring highly capable people, you must acquire a good if not the
best machine. Nowadays, it is very important to acquire technologically
updated machines.
c. Methods- Today, we see that every business tries to keep track of technology.
Businesses are trying their best to be updated with the current market
trends.
Page 43
d. Materials- A businessman must not forget that in order to produce a product
continuously, abundant raw materials should be available.
What to process
Activity # 1
1. How is physiological maturity different from commercial maturity?
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
2. You are a farmer who just harvested 100kgs of tomatoes and 200kgs of
eggplants. If you are to choose how you will market your commodities,
which would you prefer, wholesale or retail? Why?
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
3. Give the 4 M’s of production and explain its importance in crop production.
a. ____________________________________________________
b. ____________________________________________________
c. ____________________________________________________
d. ____________________________________________________
Activity # 1
Conduct an interview with the nearest crop producer in the locality
about harvesting and marketing practices. Make a narrative and pictorial report of
Page 44
the conduct of the interview for reporting in class. Be guided by the following
questions below:
CRITERIA 4 3 2 1
Exceptional Generally Lacks clarity, Unclear,
ly clear, clear, quite difficult to impossible to
Clear
easy to easy to understand understand
understand understand
What to transfer
Is proper way of harvesting and marketing clear to you
now? Great! Be ready for the hands-on activity.
GRASPS
Goal – Your goal is to help students in a Crop Production class understand how to
properly harvest and market crops.
Page 45
Role - You’re an agriculturist who was invited to be a resource person.
Audience– The target audience is the Grade 7 students taking up Crop Production as
exploratory subject in TLE.
Situation – You need to demonstrate the proper way of harvesting and marketing crops
Product/Performance – Proper demonstration of:
A. Harvesting; and
B. Marketing crops.
Standard – You will be assessed using the given rubric below.
Your performance for harvesting will be rated using the following rubric:
SUMMARY
Page 46
GLOSSARRY OF TERMS
Congratulations!
You have successfully completed the course with flying colors!
Page 47
REFERENCES:
Books
Others
1. http://business.inquirer.net/1796/manpower-development-for-agriculture-
entrepreneurs%E2%80%93part-1
2. http://en.wikipedia.org/wiki/Sickle
3. http://www.agribusinessweek.com/agri-entrepreneurship-simplified/
4. http://www.bukisa.com/articles/134282_harvesting-and-marketing-vegetables
5. http://www.elateafrica.org/elate/entrepreneur/entrepreneur/characteristics.html
6. http://www.gardentoolcompany.com/small-hand-forks/
7. http://www.google.com.ph
8. http://www.google.com.ph/search?
9. http://www.google.com.ph/imgres?
Page 48