Professional Documents
Culture Documents
DS LT 110eu June 2004
DS LT 110eu June 2004
Functional Description
LineTroll110E continuously monitors the line voltage and phase current, the sources of information it needs to operate. The unit is fully self-contained, no external transformers or connections is required. During normal line conditions, LineTroll110E remains extinguished. The indicator is looking for a specific sequence of line conditions to happen before it starts flashing. The general sequence is as follows: A. The line should be energised (voltage or current present) for a minimum of 5 seconds. B. Di/Dt: The line current should increase rapidly by the amount of a user set value (the step level). Threshold: The line current exceeding a preset current level C. The line should be de-energised. (voltage or current not present) The user may program the criteria for operation to suit his local requirement by manipulating a bank of micro-switches inside the indicator.
LineTroll110E
Fault Passage Indicator for Overhead lines (6-66kV)
Technical Specifications
Application: Fault-detection: Innrush-blocking: Reset: Short circuit and Earth fault indication for overhead lines. System Voltage: MV voltage network (6-66kV) Grounding system: Isolated, resistor and solidly grounded Sensitivity Di/Dt: 6, 12, 25, or 60* Sensitivity treshold: 250, 500, 750 or 1000A* Duration: >25ms* 5 sec Automatic: Re- energized line (Voltage or current, programmable) Timer: 2, 6, 12, or 32 hours Manual: By magnet/Mounting-reset tool
Note *: All treshold, timers etc. are selectable and programmable by microswitches. Indication: Intensity: Power supply: Mounting: Temp: Housing: Dimension: Weight: Degree of protection: Battery change: Hot-stick Conductor size: 1 Green LED for transient fault 4 Red LEDs for permanent fault 1 Orange Led for low battery indication > 10 lumens 1 Lithium Cell (D size 16,5 Ah) Every 1200 hous flashing, normally every 7-8 years Live-line mounting with KBN-3 mounting tool 5-24mm -40 to +70 deg Polycarbonate, UV stablized 202 x 54mm (with box 235 x 65 x 85) 460g (including box and battery) IP54
Ordering Information
Product nr: Product nr: Product nr: Product nr: 1200 1066 1068 1056 LineTroll110E KBN-3 Reset/mounting tool with bolt hot-stick adaptor KBN-3 Reset/mounting tool with eye-plate hot-stick adaptor KBB-11 replacement battery
Since the foundation in 1976, Nortroll AS has devoted its activities to the development of equipment aiming to reduce electric utilities outage times. We offers a wide range of products for fault detection and remote operation in the MV Distribution Network.
About Nortroll AS
Your Representative