SAFIETY DATA SHEET Sica
This saiety data sheet is prepared in accordance with EU directive 91/155/EC ammended by eSeiNGs:
rection 2001/88/EC.
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
MSDS NL 01 / EN Version 7.5
Print Date 7/14/2005
Revision date 08-07-05
11. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product information
Trace name ‘SIGMADUR 520 (HB FINISH) BASE (LEAD FREE
Reccmmended use solvent based, two component coating base
Registration number (Denmark) , PR-1015192,
Company ‘Sigma Costings BV
‘Amsterdameeweg 14
1822 AD Vithoom
Telephone 431297541911
Telefax + 431297841050
Emergency telephone number ¥31204075210
12. COMPOSITIONIINFORMATION ON INGREDIENTS
For consponents with an occupational treshivold limit value see chapter 8
Uf multigle components with identical identifiers appear, these have different hazardous properties, eg. flashpoint
Companies EINECS ]CASNa. [Symbol [R-phasctay [Concanvaton —]
No
Tahir TISSIST | 1530307 [Xe RG, RIOT, | 1000-25.00%
RE
Solvent raph (pave gh arom, | 365-199.0 | EATATIS-S | Xe, N | RIO. RSIS, [10.60 5.00%
6S, R37,
6s, R6?
eye masa [oat Ri1_R20__[250- 10.00%,
mtn: ea 203-503-9 1108-65-6 RIO. RIG 2.50-10.00%
amide wax R20, RS} — [0.00-250%
Bis? 3 6S pemtmliyAp peAByD ehacas [25547 | AUSSEIET | N___|ReB_ RIOT ]0.00-2:50%
Metyt12.266pentmetytpipendyl | 280-0604] 2919-97-7] Xi. N] RAD, RSHS3 OOO 2.50%
sebacats
3. HAZARDS IDENTIFICATION
Harurdous components
ylene
Rephrase(s) :
FLAMMABLE.
HARMFUL BY INHALATION AND IN CONTACT WITH SKIN,
HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC
ENVIRONMENT.
P-phrase(s)
v8SAFETY DATA SHEET
This saiety date sheat is prepared in accordance with EU directive S1/1S5/EC ommended by
Girectivs 200V8BEC.
SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
MSOS HL 01 /EN Version 7.5 Print Date 7/14/2005
Revision date 08-07-05
Con ains: Bix(1.2,2,6,6-pentamethyl-4-piperidyl) sebacate
Meth! 1,2.2,6,6-pentamethy|-4-piperidyl sebacate
May produce an allergic reaction.
|4. FIRST AID MEASURES
Gen zeal advice ‘When symptoms persist or in all eases of doubt seck medical advice. Never
tive anything by mouth to an unconscious person
Bye contact Inrigate copiously with clean, fresh water for atleast 10 minutes, holding the
cyclids apart. Remove contact lenses. Seck medical advice.
Skin contact ‘Take offall contaminated clothing immediately. Wash skin thoroughly with
soap and water or use recognized skin cleanser. Do NOT use solvents or
‘thinners
Inhsdation Remove to fresh air. Keep patient warm and at rst. I beeathing is ivegular
or stopped, administer anificial respiration. If unconscious place in recovery
position and seek medical advice.
ngestion : Ifaccidently swallowed obtain immediate medical atention. Keep at rest. Do
rot induce vomiting
Burs If spills on clothing catch fire, wash with plenty of water. Remove toose
clothing. Do not remove clothing that has melted tothe skin Obtain medical
attention
IS. FIRE-FIGHTING MEASURES
Specific hazards during fire ‘As the product contains combustible organic components, ie will produce
fiph ing dense black smoke containing hazardous products of combustion (see section
10). Exposure to decomposition products may be a hazard to health. Coot
closed containers exposed to fie with water spray. Do not allow run-off from
fire fighting to enter drains or water courses.
‘Special protective equipment Inthe event of fire, wear self-contained breathing apparatus.
for fire-fighters
Suitable extinguishing media Use water spray, alcohol-esistant foam, dry chemical or eazbon dioxide.
Keep containers and surroundings cool with water spray.
Extinguishing media which 2 DoNOT use waterjet.
‘must not be used for safety
reasons
|
'6, ACCIDENTAL RELEASE MEASURES
Personal precautions Use personal protective equipment. Ventilate the area. Refer to protective
‘measures listed in sections 7 and 8. Wear respiratory protection, Beware of
‘vapours accumulating to form explosive concentrations. Vopours can
accamulate in low areas, Remove all sourees of ignition.
Environmental precautions ‘Try to prevent the material ffom eatering drains or water ways. Ifthe produet
contaminates rivers and lakes or drains inform respective authorities,
Clean with detergents. Avoid solvents, Contain and collect spillage with non
combustible ebsorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to local / national
regulations (see section 13).
Additional advice 2 Refer to scction 15 for specific national regulation
Met rods fort
LSAFETY DATA SHEET
directive 2001/9HEC.
MOS NL 01 / EN Version 7.5
ini auey del seats prepared in acordance wth EU crectve S1/ISSEEC ammended by PP i855
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
Print Date 7/14/2005
Revision date 08-07-05
17. HANDLING AND STORAGE
Handling
Safi handling advice
Advice on protection against
fire and explosion
Storage
Requirements for storage areas
| and containers
| Advice on common storage
Mi
TO REACH TLY
TO REACH 10 % LEL
TLV of the product
Avoid exceeding of the given occupational exposure limits (see section 8).
Use only in area provided with appropriate exhaust ventilation, Avoid contact
with skin, eyes and clothing. Smoking, cating and drinking should be
prohibited in the application area, Avoid inhalation of vapour or mist. For
personal protection see section 8.
Prevent the creation of flammable or explosive concentrations of vapour in
‘ir and avoid vapour concentration higher than the occupational exposure
limits. When transferring from one container to another apply earthing,
‘measures and use conductive hose material. No sparking tools should be
uscd. The product should only be used in areas from which all naked lights
land other sources of ignition have becn excluded. No smoking, The
accumulation of contaminated rags and dry overspray, particularly in spray
booth filters, may result in spontancous combustion. Goad housekeeping.
standards, regular safe removal of waste materials and regular maintenance of
spray booth filters will minimise the risks of spontancous combustion and
other fire hazards.
‘Observe label precautions. Prevent unauthorized access, Containers which
aze opened must be carefully rescaled and kept upright to prevent leakage.
‘Store betweea 5 and 25°C (41 - 77 F) ina dry, well ventilated place away
from sources of heat, ignition and direct sunlight. Solvent vapours are heavier
than air and may spread along floors. Vapours may form explosive mixtures
‘with air. Electeical installations / working materials must comply with the
technocological safety standards. Keep away from sources of ignition - No
smoking. Store in accordance with the particular national regulations (see
section 15).
Keep away from oxidising agents and strongly acid or alkaline materials.
Ib. EXPC'SURE CONTROLS / PERSONAL PROTECTION
um ventilated air quantity for 1 liter of product
2,420 m3 Basis: MAC (NL)
103 m3,
179 mg/m3. Basis: MAC (NL)
Components on the national MAC list and/or the European TLY list (98/24/EC):
Components
CASNo. [Value] Value] Basis
(rogien")__| fppm)
3/8SAFIETY DATA SHEET
irectiv2 20018B/EC.
MSDS NL 01/EN Version 7.5
This seaty data sheet is proparad in accordance with EU directive 9Y/15S/EC ammended by
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
Print Date 7/74/2005
Revision date 08-07-05
ayline 1330-20-7 [210.00 [3000 | MAC(N) TWA
‘aan be absorbed through skincan be absorbed 221.00 |s000 | EUELV TWA
throwgh skin 442.00 |10000 | EU ELV sTEL.
Solvent naphiha (petroleum), ight arom: BATTSSS | 35.00 ESIGTWA
eth /Ibenzene T0014 |215.00 30.00 ‘MAC (NL) TWA
can be absorbed through skincon be absorbed 442,00 |10000 | EUELV TWA
through skin 884.00 |20000 | EUELV STEL
| 2-miethoxy-I-methylethy! acetate TO8-65-6 | $50.00 100.00 MAC (NL) TWA
| | eam be absorbed through skin 27500 50.00 | EUELV TWA
i 50.00 10000 | BUELV STEL
Personal protective equipment
General advice
Respiratory protection
Hand protection
Eye protection
Skin and body protection
Adlitional advice
Environmental protection
Personal protection
SigaraKalon Internal Safety
Conte (INSACO)
Form
Cotour
Odnur
Flash point
Autoignition temperature
Upper explosion limit
Lower explosion limit
Dersity
Water solubility
pH
‘When operators, whether spraying or not, have fo work inside the spray
booth, ventilation is unlikly to be sufficient to contol particulates and solvent
‘vopour in all cases. In such circumstances they should wear a compressed air-
fed respirator during the spraying process and until such time as the
pasticulates and solvent vapour concentration has fallen below the exposure
nts
For prolonged or repeated contact use protective gloves. Barrier creams may
Irelp to protect the exposed areas of skin, they should however not be applied
‘once exposure has occurred, Skin should be washed after contact.
(Chemical resistant goggles must be wor.
Personnel should wear protective clothing. Skin should be washed after
contact. Working clothes must not consist of textiles, which show a
dangerous melting behaviour incase of fire. Workers should wear antistatic
footwear,
Refer to national regulations in chapter 15 for regulations on environmental
protection
Bnclosing glasses, safety gloves and P2A2 half:face combi mask
Please contact your personal protection equipment supplier for further advice
9. PHYSICAL AND CHEMICAL PROPERTIES
slight aromatic
300°C
Note: Calculated
>3s08C
TIT HV)
0.94 mV)
ca. 1.3 plem3
insoluble
48
1SAFETY DATA SHEET
THis sively data sheet is prepered in accordance with EU directive 91/1S9/EC ammended by
directive 2001/90EC.
MSDS NL 01/ EN Version 7.5
, dynamnic
Flow time
| SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
Print Date 7/14/2005
Revision date 08-07-05
700 maPa.s at 23 °C
>= 608
‘Transversal section: 6 mm
Method: ISO 2431 (EN 535) 6 mam CUP
110, STABILITY AND REACTIVITY
Conditions to avoi
Hazardous reactions
Hazardous decomposition
products
14. TOXICOLOGICAL INFORMATION
‘cate oral toxicity
Acute inhalation toxicity
Skin iita
Ey? contact :
Further information
Ac te Toxicity Data for Components
ETHYLBENZENE (100-41-4)
Acute inhalation toxicity
Avoid temperatures above 60°C (140 F), direct sunlight and contact with
sources of heat.
Keep away from oxidising agents, strongly alkaline and strongly acid
materials in order to avoid exothermic reactions.
Incase of fire hazardous decomposition products may be produced such as:
Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOX),
dense black smoke.
‘May cause nausea, abdominal spasms and imitation of the mucous
membranes.
Exposure to component solvent vapours concentration in excess ofthe stated
‘occupational expomure limit may rexult in adverse health effect, Such as
‘mucous membrane irritation. respiratory system iritation, adverse effects on
kidney, liver and central nervous system. Symptoms and signs: headache,
dizziness, fatigue, muscular weakness, drowsiness and in extreme cases loss
of consciousness.
Repeated or prolonged contact withthe preparation may cause removal of
natural fat from the skin resulting in desiccation of the skin. The product may
bbe absorbed through the skin
‘The liquid splashed in the eyes may cause imitation and reversibte damage.
‘There is no data available for this product.
LC50: 100 ppm (lo) (mouse, 4h)
4
2. ECOLOGICAL INFORMATION
Fuvther information
“The preparation has been assessed following the conventional method of the
Dangerous Preparations Directive 1999/4S/EC and is classified for
ecotoxieological properties accordingly. See sections 2 and 15 for details
4
3. DISPOSAL CONSIDERATIONS
Preduct
Waste key for the unused
‘The product should not be allowed to enter drains, water courses or the sol
Disposal together with normal waste isnot allowed. Special disposat required
according to local regulations.
08 01 11: waste paint and varnish containing organic solvents or other
dangerous substances.
8SAFETY DATA SHEET
Ts sufly deta sheet prepared in accordance wih EU directive S11SS/EC ommended by
Giective 2001/88/EC.
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
MSDS NL 01/EN Version 7.5 Print Date 7/14/2005
Revision date 0807-05. |
114, TRANSPORT INFORMATION
‘Trcnsport to be in accordance with ADR for road, IMDG for sea and TATA for air transport
UN-No 1263
Proper shipping name PAINT
Clas 3 |
Packing group m
Lael 3
Ma ine Poltutaat (IMDG)P.PP,-) Pe
Ma ine Pollutant component (IMDG) Dibutyltin bis C8-C18 carboxylates
Em3 (IMDG) FESE
| Limited quantity (ADR) ‘Max. per inner pack. : 5,00 L
| Max. per outer pack. : 30.00 KG
Limited quantity (IMDG) Max. per inner pack, :$.00 L
Max. per outer pack. : 30.00 KG
Note
‘yack sizes less than 450L, under the terms of 2.23.1.5, this product isnot subject tothe provisions of ADR.
115, REGULATORY INFORMATION
Harmful
Havardous components which must be listed on the label:
| + xylene
Rephrase(s) R10 Flammable,
2021 Harmful by inhalation and in contact with skin,
5253 Harmful to aquatic organisms, may cause long-term
adverse effects in the aquatic environment,
Sphrase(s) $23 Do not breathe spray.
33637 ‘Wear suitable protective clothing and gloves,
$38 In case of insufticient ventilation, wear suitable
respiratory equipment
61 Avoid release to the environment. Refer to special
instructionvsafery date sheet,
Pep rrase(s) P99) Contains : Bis(1,2,2,6,6-pentamethyl-4-piperidy!)
sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate
May produce an allergic reaction,
‘National legistation‘Ths suety dota sheet is prepared in accordance wih EU directive 91/15S/EC emmended by
Giroctve 2001/987EC.
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
MSDS NL 01 /EN Version 7.5, Print Date 7/74/2005,
Revision dale 08-07-05
SAFETY DATA SHEET Ses
Registration number (Denmark) , PR-1015192,
| Mincem 2 P2,Xq
|
CFR Classification : K3Xn
NER Classification NER Class 0.1: 0 (mn)
NER Class 0.2: 36.9 %(en)
NER Class 03: 1.1 %(m)
MAL code (1993) 43
116, OTHER INFORMATION
“Ths product contains a complex mixtare of bydrocarbons. Detailed information can be obtained by the producer.
jon of R-phrases mentioned in section 2
| RI0 Flammabte.
| R2021 ‘Harmful by inhalation and in contact with skin.
R38 Invtating to skin.
So.vent naphtha (petroleum), light arom. R10 Flammable,
R513 Toxic to aguatie organisms, may cause long-term adverse
«effects in the aquatic environment.
Ros armnfl: may cause lung damage if swallowed,
R37 levitating to respiratory system.
R66 Repeated exposure may cause skin dryness or cracking,
R67 \Vapours may cause drowsiness and dizziness
ethylbenzene RI Highly flammable.
R20 Harmful by inhalation,
2-methoxy-I-methylethy! acetate RIO Flammable,
R36 Lrvitating to eyes.
am de wax R20 Harmful by inhalation.
RS May cause long-term adverse effects in the aquatic
Bis(1,2.2,6,6-pentamethyl-4-piperidyl) R43 ‘May cause sensitization by skin contact,
sebicate 50/53. Very toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.
Mehl 1,2,2,6,6-pentamethyl-4-piperidy! R43 May cause sensitization by skin contact,
sebicate 51/83 Toxic to aquatic organisms, may cause long-term adverse
clfects in the aquatic environment.
Version: 7.5 Revision date 08.07.2005,
‘The information contained in this safety data sheet is based on the present state of knowledge and current European and
| National tegisation at the date of issue. The supplier reserves the right to modify data on the safety data sheet without
fanher notice. Any change in data will normally be followed by the issue of a new safety data sheet, The uscr should
chezk the date of issue and if more than 12 months have clapsed, then the data should only be used after checking with
the nearest sales office of the supplier to establish that the data is still valid. As the specific conditions of use of the
product are outside the suppliers control the supplier is not reponsible forthe (negative) consequences of these specific
ontitions of use, which are outside ofthe suppliers. control and which are act compliant with the handling, storage
and other instructions inthis safety data sheet.
718SAFETY DATA SHEET
Fa antl tt ant proper ls ccorhce wih EU dace S1SSEC med by IMA cs
ete
|SIGMADUR 520 (HB FINISH) BASE (LEAD FREE COLOURS)
MSDS NL 01/ EN Version 7.5 Print Date 7/14/2005
Revision date 0807-05 |
‘Afer al component(s) stated on the relevant Technical Data Sheet have been mixed the safety precautions mentioned
fon etch of the component(e) safety data sheets and Inbels should be used in assessing the safety precautions of the |
iced product
For further information see technical data sheet number: 7524
8B