Professional Documents
Culture Documents
Sanitizers
Sanitizers
IntelliPH Controller
IntelliPH Controller
IntelliPH Includes:
IntelliPH Controller
IntelliPH Includes:
• Control Panel
IntelliPH Controller
IntelliPH Includes:
• Control Panel
• 4 Gal Storage
container with Pump
IntelliPH Controller
IntelliPH Includes:
• Control Panel
• 4 Gal Storage
container with Pump
• 15 ft Acid resistant
tubing
IntelliPH Controller
IntelliPH Includes
• Control Panel
• 4 Gal Storage
container with Pump
• 15 ft Acid resistant
tubing
• 2 Saddle clamps
IntelliPH Controller
IntelliPH Includes:
• Control Panel
• 4 Gal Storage
container with Pump
• 15 ft Acid resistant
tubing
• 2 Saddle clamps
• Injection fitting
IntelliPH Controller
• To set up the
programming press
the menu button
IntelliPH Controller
• The system is
factory set at 50%.
• To increase or
decrease the
percentage use the
More or Less arrow.
• Press Enter
IntelliPH Controller
• It will check to
ensure the flow
switch is closed on
the IntelliChlor
before it will begin
SuperChlor
IntelliPH Controller
• If the system is
connected to
EasyTouch or
IntelliTouch you
must make this
adjustment from the
controller.
IntelliPH Controller
• If there is no
automation. You will
now be able to use
the up or down
arrow to increase or
decrease the Cell
Output.
IntelliPH Controller
• If there is no
automation. You will
now be able to use
the up or down
arrow to increase or
decrease the Cell
Output.
IntelliPH Controller
• If there is no
automation. You will
now be able to use
the up or down
arrow to increase or
decrease the Cell
Output.
IntelliPH Controller
Troubleshooting:
• The “System
Status” light will
Green if the system
is working properly
IntelliPH Controller
Troubleshooting:
• The “System
Status” light will
Green if the system
is working properly
• If there is an error
or problem with the
system you will see
a red light
indicating it needs
service
IntelliPH Controller
Troubleshooting:
• *Note during a
power up it may
take up to 2 min for
the IC cell to
confirm flow you
will see the red light
during this time.
This is normal
IntelliPH Controller
Troubleshooting
IntelliPH Controller
• 3 SKUs:
– No pump (for use with IntelliChlor and CO2)
– 1 pump (for use with IntelliChlor and muriatic
acid)
• Has new 4 gallon acid container bundled in
the box
– 2 pump (for use with liquid chlorine and
muriatic acid)
IntelliChem
• What’s included?
– Control system
– Commercial grade flow cell
– Commercial grade pH and ORP (gold tipped)
probes
– All hoses, clamps, and other misc. hardware
IntelliChem
• Accessories
– 4 gallon acid container (pink)
– 4 gallon chlorine container (yellow)
– CO2 kit with diffuser, solenoid & regulator
IntelliChem Features
• Intellichem is 110/220V, 50/60 Hertz
• Intellichem can communicate with IT, ET and ST
• Screen Logic and Remote Monitoring Support
• Intellichem has UL and CUL Listing
• Intellichem is Outdoor Rated
IntelliChem Features
•Can be configured to drive external pumps
(commercial)
• Acid and Chlorine Containers of any size can be
used
• Intellichem and drive audible alarms and visual
indicators
• Controls ORP and pH
Recommended Pool Chemistry
Setup
Electrical Connection
Circuit Board
Sensor Maintenance
Sensor Care
Injector Installation
Oxidizable Substances
Weak Bond
Oxygen (O2)
IntelliZone
Benefits
• Reduces the cause of Swimmer’s Asthma
Benefits
• Reduces the amount of chlorine needed
System Information
??? Questions ???