Professional Documents
Culture Documents
Information On The New Electric and Electronic Installation
Information On The New Electric and Electronic Installation
Information On The New Electric and Electronic Installation
For this practice use EDT tablets, tractors, Dashboard mock up and
training documents.
7. Where can you check the operation of the right pillar keyboard
switches ?
………………………………........…..........................................….......
...........................................................................................................
...........................................................................................................
..............................................................................……..……………..
9. Select now TECU label code and check/set code AA, how many
choices do you have ?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………………………………..……..……..……..……..……..……..
12. Run through all the screens available in the diagnostic by functions
menu and mention them:
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
14. Look for the windows corresponding to the screens below and
complete the following text boxes with the values that you find:
15. How can you check the operation of the air control system ?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
18. Compare the values between the air temperature sensor and the
intake temperature sensor, are the values equal ? Why ?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……..…………………..…..…….………………………………………
19. What is the status of the different actuators when the tractor is at
idle speed ?
……………………………………………………………………………
……………………………………………………………………………
…………………………………………………………………………….
…………………………………………………………………………...
22. When you have done the print screen, change the last number of
an injector code or change completely the IQA code. What
happens on the code in the window ?
...….………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………….………..........………………………………………………
23. Change again the code for the injector but with the correct code.
24. Run through all the screens in the Setup and Information Screen
(SIS).
25. Set the SIS screen in basic mode pressing for 5 seconds the OK
and home button, how many screens do you have? Mention them ?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………………………………………………………………………...
26. Return to the main screen and set the SIS screen in advanced
mode (same procedure), how many screens do you have?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………………..………………………………………………………..
27. With the help of the OIB run through the SIS different menus and
adjust / set some values:
- Adjust the powershuttle sensitivity value to "+3".
- Set the engine memo A to "1500rpm".
- Adjust the speedster value to "+4".
- Set the brightness to "+2".
28. When you are on the main screen what happens if you press the
top or the low arrow of the keypad?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
32. With the aid of the OIB, could you describe the functioning of the
comfort lights function?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………...................................…………………………….
33. With the aid of the TSB or the EDT help file, mention what
calibration screens can be selected? What functions are available
in each screen?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…………………………………………………………………………...
34. How can you adjust the height of the front axle? ……………………
……………………………………………………………………………
……………………………………………………………………………
35. What condition you must respect to be able to adjust the height of
the front axle? …………………………………………………………
……………………………………………………………………………
…………………………………………………………………………...
Part 3: Use of the tractor (using OIB, TSB & EDT help file)
37. What is the procedure to set the cab suspension in high position?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
…....................................................................................................
38. What condition must you respect to be able to set the cab in high
position?
……………………………………………………………………………
……………………………………………………………………………
……………………………………………………………………………
………..…………………………………………………………………..