Professional Documents
Culture Documents
Submersible Wastewater Pumps With Single Vane Impeller 3" Discharge - 2" Solids
Submersible Wastewater Pumps With Single Vane Impeller 3" Discharge - 2" Solids
20 20 헀
햳 햴 햸
10 10
햲
0 0
0 40 80 120 160 200 240 280 320 0 40 80 120 160 200 240 280 320 360
FLOW (USGPM)
Application Features
The HOMA TP 53 Series of
submersible pumps are ideal for Integral Lift Handle is Upper and Lower High
arched to permit self Capacity Ball Bearings
wastewater and sewage service centering of lifting device assure long life and
in residential, commercial and in- reliability
dustrial applications. The TP 53 is
also excellent for drainage appli- Cast Iron Motor windings
cations where large solids are Construction with provided with Class F
present. Epoxy Coating insulation and fully
for maximum protected by embedded
Typical Fluids Handled Are: corrosion resistance auto reset thermal
switches
• Clear and Drainage Water
• Effluent and Sewage with Soft Extra Long
Solids Replaceable power Oil Filled Seal Chamber
• Liquids to 140 F can be handled cable of 33’ length positively lubricates
is retained and seals and permits a seal
intermittantly sealed with a strain leakage probe to be
• PH Range 5 – 9 with Specific relief gland installed
Gravity to 1.1
Standard Lower Single Vane impeller for
TP 50 Series pumps are typically Seal material is large solids handling
used in: Silicon Carbide
Technical Data
Curve Pump Type Rated Phase Voltage Full Load Speed Weight NEMA
No. B.H.P. (V) Amps (rpm) (LBS) code
1 TP53M16/ 2 / 1 1.2 1 230 5.4 3450 57 F
2 TP53M24/ 2 / 1 1.7 1 230 7.8 3450 55 F
3 TP53M38L/ 2 / 1 2.6 1 230 12.0 3450 88 F