Professional Documents
Culture Documents
2.5 A High-Side Driver Industrial Intelligent Power Switch: Features
2.5 A High-Side Driver Industrial Intelligent Power Switch: Features
Features
■ 2.5 A output current
■ 9.5 V to 35 V supply voltage range
■ Internal current limiting
PowerSO-20
■ Thermal shutdown
■ Open ground protection
■ Internal negative voltage clamping to VS - 50 V
for fast demagnetization Description
■ Differential inputs with large common mode The L6370 is a monolithic intelligent power switch
range and threshold hysteresis in Multipower-BCD Technology, for driving
■ Undervoltage lockout with hysteresis inductive or resistive loads. An internal clamping
diode enables the fast demagnetization of
■ Open load detection
inductive loads. Diagnostic for CPU feedback and
■ Two diagnostic outputs extensive use of electrical protections make this
■ Output status led driver device extremely rugged and specially suitable for
industrial automation applications.
■ Non dissipative short circuit protection
■ Protection against and surge transient (IEC
61000-4-5)
■ Immunity against burst transient (IEC 61000-4-
4)
■ ESD protection (human body model ±2kV)
Contents
2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 AC operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Circuit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1 Diagnostic truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 Input section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Diagnostic logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.4 Short circuit operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.5 Overtemperature protection (OVT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.6 Undervoltage protection (UV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.7 Demagnetization of inductive loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
VS
UNDER CHARGE
VOLTAGE PUMP
INPUT
IN+ +
DRIVER
IN- -
1.4V OUT
NON DISSIPATIVE CURRENT
SHORT CIRCUIT LIMITATION RSC
OPEN LOAD
ON-DELAY OSC DETECTION
OUTSTATUS
DIAG1
DIAGNOSTIC
THERMAL
PROTECTION
DIAG2
3mA
GND 1 20 GND
OUTPUT 2 19 OUTPUT STATUS
OUTPUT 3 18 INPUT -
ON-DELAY 4 17 INPUT +
SUPPLY VOLTAGE 5 16 N.C. PowerSO-20
SUPPLY VOLTAGE 6 15 DIAGNOSTIC 2
N.C. 7 14 DIAGNOSTIC 1
OUTPUT 8 13 RSC
OUTPUT 9 12 N.C.
GND 10 11 GND
D95IN210B
Note: Output pins must be connected externally to the package to use all leads for the output
current (Pin 2, 3, 8 and 9 for PowerSO20 package).
2 Electrical specifications
Thermal characteristics
2.4 AC operation
Table 6. AC operation
Symbol Parameter Test condition Min. Typ. Max. Unit
3 Circuit description
Vohys
Vsth3
50% 50%
t
td td
Vout
90% 90%
50% 50%
10% 10%
t
tr tf D94IN127A
L L H H
Normal operation
H H H H
L L H H
Open load condition (Io< Iold)
H H L H
L H L H
Short to VS
H H L H
The hysteresis (see Figure 4) ensures a non intermittent behavior at low supply voltage with
a superimposed ripple. The under voltage status is signalled via the DIAG1 and DIAG2
outputs (see the Diagnostic Truth Table 7).
+VS
IS
50V
VS
OUTPUT
IO L
RL
D95IN215A
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX. OUTLINE AND
A 3.6 0.142 MECHANICAL DATA
a1 0.1 0.3 0.004 0.012
a2 3.3 0.130
a3 0 0.1 0.000 0.004
b 0.4 0.53 0.016 0.021 Weight: 1.9gr
N N R
a2 A
c
a1
b e DETAIL B
DETAIL A E
e3
H DETAIL A
lead
D
a3 slug
DETAIL B
20 11 0.35
Gage Plane
-C-
S SEATING PLANE
L
G C
BOTTOM VIEW (COPLANARITY)
E2 E1
E3
1 1 0
PSO20MEC
D1
h x 45˚
0056635 I
A D N
FOOTPRINT DATA
mm. inch
A 9.5 0.374
B 14.7-15.0 0.579-0.591
C 12.5-12.7 0.492-0.500
D 6.3 0.248
E 0.64 0.026
F 0.71 0.028
G 1.27 0.050
5 Revision history
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.