Professional Documents
Culture Documents
Ratchet Tie Down Sop
Ratchet Tie Down Sop
Ratchet Tie Down Sop
Tools Specification
1. PURPOSE
The purpose of this standard operating procedure is to provide a guideline to the user in
performing to use the Ratchet lashing system to tied down securely to pallet, truck bed or
somewhere else. learning how to use ratchet tie down can be key to safe cargo management.
2. INTRODUCTION
A heavy-duty ratchet tie-downs are engineered for industrial cargo control. Keeper tie-downs
are appropriate for a wide variety of applications and a Safety-First approach delivers
outstanding reliability in every circumstance. The lashing system is lightweight and
transportable, featured with easy-to-use ratchet handles and chrome J-hooks allow for secure,
high-tension transport, making ratchet tie-downs perfect for your large, demanding cargo
needs.
VTR Sdn Bhd. (163403-U) Date 4/4/2022
Lot 9, Jalan BRP 9/1C, Putra Industrial Park
Rev 00
Bukit Rahman Putra, 47000 Sungai Buloh,
Selangor Darul Ehsan. Doc. ID.
Tel: 03-61577646 FAX: 03-61577645
Prepared by Approved by Page no 3 of 5
Tittle Standard Operating Procedure of Ratchet lashing system / Tie down / Strap
3. PROCESS INSTRUCTION:
1)Insert loose strap end of strap into mandrel of 2) pull strap through slot in mandrel
rachet
3) Pull slack out of strap to make strap tight 2) pull strap through slot in mandrel
1) Pull trigger toward back handle 2) Open rachet all the way
4.1. Ratchet lashing system must be regularly inspected to ensure they are not
damaged. Even minor damage can drastically reduce the strap’s capacity and
increase the chance of failure during use.
The entire ratchet strap assembly must be inspected before each use and
removed from service if any of the following are detected:
identification tag is missing or illegible
Holes, tears, cuts, snags, or embedded materials
Broken or worn stitches in the load-bearing splices
Knots in any part of the webbing
Distortion, excessive pitting, corrosion, or other damage to buckles or end
fittings
5. STORAGE METHOD
There are three main things need to avoid when storing ratchet lashing system:
5.1. Moisture
Storing ratchet lashing system is a place where they are exposed to moisture
can cause it to mold and mildew. Mold can extremely weaken the strength of the
webbing and the polyester can be destroyed, even in heavy-duty lashing
system.