Professional Documents
Culture Documents
Galvanized Tank Protecting Insulator
Galvanized Tank Protecting Insulator
https://doi.org/10.22214/ijraset.2022.43712
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 10 Issue VI June 2022- Available at www.ijraset.com
K. S. Shelke1, Rhytham S. Bidkar2, Milind A. Bhongade3, Sahil. P. Agrawal4, Aman. S. Tumane5, Madhusudan M
Ghode6
2
Assistant Professor,Under Graduate Scholars, Department of Mechanical Engineering, Priyadarshini College of Engineering,
Nagpur, India.
Abstract: We have experimentally studied the conditions required for stripping Zn in a sulfuric acid solution from industrial
galvanized steel products, removing impurities from this solution, and recovering Zn. The results show that sulfuric acid up to
pH 0.2 can be used to completely remove Zn from used galvanized steel products. Repeated stripping produces a solution
containing more than 8085 g / l of Zn and 0.2 g / l of Fe, and ZnSO4 can be recovered from the solution by adding a volatile
liquid (ethyl alcohol). The precipitated Zn compound is ZnSO4.H2O. This compound contains 36.4% Zn and 0.002% and is a
raw material of sufficient purity for commercial use. The ethyl alcohol used to recover ZnSO4.H2O from the concentrated strip
solution is recovered with 90% efficiency by distillation at 78 ° C for 20 minutes. Optimized through experimentation, this
process enables the production of products for sale and does not cause environmental problems.
I. INTRODUCTION
In this project, we used an isolator shield for the cover. Galvanized zine tank. Or electroplating to reduce the waste of heat in the
tank
In this project ,. Kan also supports environmental support Contral Lut of fuel needed to maintain liquefaction.
Zinc in the tank, you can also store it. Through this system ..
KEC INTERNATIONAL LIMITED IS AN INDIAN MULTINATIONAL COMPANY AND INDIA'S SECOND LARGEST
MANUFACTURER OF ELECTRIC POWER TRANSMISSION TOWERS AND ONE OF THE LARGEST POWER
TRANSMISSION, ENGINEERING, PROCUREMENT AND CONSTRUCTIONS (EPC) COMPANIES. IN THE WORLD. IT IS
HEADQUARTERED IN MUMBAI, INDIA AND IS A PART OF THE 2255 BILLION RPG GROUP, ENGAGED IN EPC
WORKS FOR POWER TRANSMISSION, DISTRIBUTION, RAILWAYS, CABLES, SOLAR, CIVIL AND SMART
INFRASTRUCTURE. Ramjibhai Kamani founded Kamani Engineering Corporation (KEC) on 7 May 1945 which became the first
electric power transmission company in Asia and a pioneer in the field of electric power transmission
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 647
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 10 Issue VI June 2022- Available at www.ijraset.com
Hazardous Detecting System Vinzintaty Does not Emission tonic Gas Into the
Plant
Hazardaus Place get underproment
Human Respiration Get Reduced
Excessive Waste Collective System Harry Fehtuse in 2016 Low Excessive Waste Collective
Improving The Low Layer by Dirt Firm
Making Process
Feul Forward System Van -Van-Titkey Easy to Move Mechanism
Fuel Forward Process is Quickly
Responsive
There is Motor Attached to the System
Human body effect due to zincs Ross.G. Coopu Respiration effect get reduced
fumes Eyes burning problems gets solved due
to high [resent of zinc fumes into the
industrial
Skin damaged gets reduced
Gear drive arrangement for fuel Steve heudelt Quick operation system
forword the whole system Easy to flow process system
Maintainsfree system
Low lubrication required to run the
system
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 648
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 10 Issue VI June 2022- Available at www.ijraset.com
V. COMPONENTS
1) Insulating Material
2) Ball Bearing
3) Gear Drive System
4) DC Motor
5) Sliding Frame Guide
6) Controlling Panel
7) Fabrication Structure
VI. OBJECTIVE OF PROJECT
1) To reduce the heat loss from the tank.
2) To reduce the fuel consumption by burner.
3) To reduce the fumes effect of human and environment.
4) Impurties of the tank also get reduced
5) Heat of the working areaalso reduced
VII. CONCLUSION
1) This can reduce heat flow
2) Heat resistant device in the tank
3) Reduced torch waste
4) Many of these carriers formed the system
5) System-like simple
6) Inhale more heat
7) You can do more without error or input
8) Not needed for humans
9) Fully automated process flow system
10) No Tris gas emissions to the plant
11) Dangerous areas will not improve
12) Reduces human expression
13) Low surplus was recovered
14) Improved process for creating low-rise dirt farms
15) Simple mechanism
16) Fuel preamble process responds quickly
17) The motor is connected to the system
VIII. FUTURE SCOPE
1) This project is developed in order to help the Indian industries for making its present working system a better one by reducing
fuel consumption and heat loss.
2) Based on the responses and reports obtained as a result of the significant development in the working system of industry this
project can be further extend to meet the demands according to situation of future.
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 649
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538
Volume 10 Issue VI June 2022- Available at www.ijraset.com
REFERENCES
[1] https://www.sciencedirect.com/topics/engineering/gear-drive
[2] https://en.wikipedia.org/wiki/Sliding_door#:~:text=A%20sliding%20door%20is%20a ,a%20wall%20when%20slid%20open.
[3] https://www.energy.gov/energysaver/weatherize/insulation/insulationmaterials#:~:text=Insulation%20materials%20run%20the%20gamut,flow%20in%20a
%20building%20cavity.
[4] Mechanical engineering Books
[5] www.google.com
[6] Wikipedia
[7] https://en.wikipedia.org/wiki/DC_motor#:~:text=A%20DC%20motor%20is%20any,e
lectrical%20energy%20into%20mechanical%20energy.&text=A%20DC%20motor's %20speed%20can,current%20in%20its%20field%20windings.
[8] .https://en.wikipedia.org/wiki/Metal_fabrication#:~:text=Metal%20fabrication%20is%
20the%20creation,structures%20from%20various%20raw%20materials.&text=As%2
0with%20other%20manufacturing%20processes,and%20automation%20are%20com monly%20used.
[9] www.google.com
[10] www.wikipedia.com
[11] www.yahoo.com
[12] www.engineers.com
[13] www.mechanicalengineers.com
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 | 650