Professional Documents
Culture Documents
Verified Component List Aama Certification Program: Part One Components of Certified Windows and Doors
Verified Component List Aama Certification Program: Part One Components of Certified Windows and Doors
Verified Component List Aama Certification Program: Part One Components of Certified Windows and Doors
OCTOBER 1, 2010
This list is comprised of those manufacturers of window and door components for whom Associated Laboratories, Inc. (ALI; AAMA’s
independent validator) has on file a current test report from an AAMA Accredited Laboratory or Approved Component Laboratory
indicating that the samples submitted for test are in full compliance with the applicable specification. Testing must be conducted by an
AAMA-accredited independent full-service laboratory or approved Component Lab. Test reports are valid for 18 months from the test
report’s completion date, indicated on this report by brackets [ ]. AAMA does not certify individual components. Company names in
Bold Face Type are AAMA Category 1 members.
Part One – Components of Certified Windows and Doors: This list is presented as a service to indicate component test reports on file
with the validator for use in window and door certification. If a supplier’s product(s) is not included in Part One, the product(s) may not
be used in a window or sliding glass door labeled in the AAMA Certification Program until ALI receives a current test report from an
AAMA Accredited Laboratory or Approved Component Laboratory.
Part Two – Materials and Components Used for Installation: These manufacturers have voluntarily had their products tested,
validated, and listed as meeting the requirements of the AAMA specification or standard as indicated.
Part One
Components of Certified Windows and Doors
PAINT APPLICATORS
Listings in this section indicate that the Applicator has applied and tested a coating in compliance with the appropriate AAMA
specification. AAMA verifies that these application lines have on file tests indicating the ability to correctly apply coatings required in
the AAMA Certification Program. (Only those applicators indicated by an asterisk (*) have completed outdoor exposure testing.) At this
time, specific paint coatings are not included as part of the AAMA Verified Components Program. In order for an applicator to be listed
in the AAMA Verified Components Program, they must be coating commercially available fenestration or building products.
WEATHERSTRIPPING
HARDWARE
SECURISTYLE LIMITED
Storm B 10 P-C-121 Lbs.-43” High-LR-NLBR [04/08/10]
Storm B 12 P-C-121 Lbs.-43” High-LR-NLBR [04/08/10]
Storm B 16 P-C-121 Lbs.-43” High-LR-NLBR [04/08/10]
Storm B 22 P-C-165 Lbs.-59” High-LR-NLBR [04/08/10]
Storm B 26 P-C-265 Lbs.-87” High-LR-NLBR [04/08/10]
Storm BS 10 C-C-103 Lbs.-33” Wide-LR-NLBR [04/08/10]
Storm BS 16 C-C-103 Lbs.-33” Wide-LR-NLBR [04/08/10]
Storm E 16 C-C-103 Lbs.-33” Wide-LR-NLBR [04/08/10]
YKK AP AMERICA
12” (4K-14207) C-C-83 Lbs.-26” Wide-LR-NLBR [08/28/09]
16” (4K-14208) C-C-117 Lbs.-36” Wide-LR-NLBR [08/24/09]
12” (4K-14207) P-C-97 Lbs-30” High-LR-NLBR [08/17/09]
16” (4K-14208) P-C-145 Lbs-44” High-LR-NLBR [07/31/09]
22” (4K-14209) P-C-166 Lbs-52” High-LR-NLBR [11/05/09]
SEALANTS
AAMA 711-07 (SELF ADHERING FLASHING USED FOR INSTALLATION OF EXTERIOR WALL
FENESTRATION PRODUCTS)
HENKEL (OH)
TeQ::Flash MDD [02/23/10]
YKK AP AMERICA
332 FIRETOWER ROAD
DUBLIN, GA 31021
PH: (478) 277-1955 FAX: (478) 277-1950
CONTACT: SHANE TANNER
EMAIL: shanetanner@ykk-api.com