Professional Documents
Culture Documents
318 - 321 Uniframe Untuk CBR, Marshall, Ucs, DLL
318 - 321 Uniframe Untuk CBR, Marshall, Ucs, DLL
Electromechanical Universal Testers, 50 and 100 kN capacity suitable for any kind of
test that requires load and/or displacement control.
They are proposed in different versions, all suitable for compression and 70-T1082
flexural tests, plus some individual feature as specified: Standard series, 50 kN cap.
70
COMMON FEATURES
UNIFRAME testers can be fitted with the following load cells, de-
pending on the test to be performed. See page 412
82-P0370 82-P0374
Load cell 2.5 kN capacity Load cell 25 kN capacity
82-P0373 82-P0375
Load cell 10 kN capacity Load cell 50 kN capacity
82-P0376
Load cell 100 kN capacity
318
70-T1182 70-T1182/T 70-T1192
Large series, 50 kN cap. 25 kN cap. in tension and 50 kN Standard series, 100 kN cap.
Suitable for tests requiring up to 380 mm distance between columns cap. in compression/flexural tests
70
70-T1182 with accessories to perform the 70-T1182 with accessories for flexural 70-T1182/T with accessories for tensile 70-T1192 with accessories to perform
Marshall test test on cement prism test on steel wires flexure test on glass-fibre reinforced
cement to EN 1170-5
319
STEEL AND MISCELLANEOUS STEEL MECHANICAL TESTING AND UNIVERSAL TESTERS
UNIFRAME accessories
UNIFRAME testers are suitable for a wide range of tests on different kinds type of test and the reference Standard. A selection of tests and their
of materials. Each test requires different accessories depending on the relevant accessories are listed below.
▸ CNR 30
Accessories
82-P0370 Load cell, 2.5kN capacity
82-P0373 Load cell, 10 kN capacity
(as alternative)
82-P0375/C Adapter to fit load cell
82-P0322 Displacement transducer,
25mm travel Accessories
34-T0104/81 Adjustable transducer 28-WF0370/T
holder 34-V0107/MAR
Load cell, 3.5 kN capacity Test set for performing Marshall tests
70-T0108/5 Load cell extension 28-WF0373/T Load cell, 10 kN capaci-
34-T0104/4 Platens for unconfined
in digital mode, comprising:
ty (as alternative) 82-P0375 Load cell, 50kN capacity
compression 28-WF6208 Displacement transducer,
34-V0107/CBR 82-P0375/C Adapter to fit load cell
25 mm travel (two pieces)
Test set for performing CBR tests in
digital mode, comprising: 82-P0322 Displacement transducer,
For triaxial cells and related accessories 25mm travel
82-P0375 Load cell, 50kN capacity see page 71 and 79
Uniaxial compression 34-T0104/81 Adjustable transducer
82-P0375/C Adapter to fit load cell
(two pieces) STANDARD holder
Flexural test on Soil-cement 34-T0104/13 Compression device
82-P0322 Displacement transducer, ▸ ASTM D1633 specimens
25mm travel extension
34-T0104/81 Adjustable transducer STANDARD 34-T0104/10 Compression device
holder ▸ ASTM D1635 76-B0033/4 Stability mould for dia. 4”
34-T0103/1 Adjustable CBR penetra- (100 mm) specimens (1)
tion piston
CBR and Marshall
(To avoid duplications when both tests
must be performed)
34-V0107/CM
Test set for performing CBR and Mar-
shall tests in digital mode, comprising:
82-P0375 Load cell, 50kN capacity
82-P0375/C Adapter to fit load cell
(two pieces)
82-P0322 Displacement transducer,
Accessories 25mm travel
Accessories
34-T0104/81 Adjustable transducer
82-P0370 Load cell, 2.5 kN capacity 82-P0370 Load cell, 2.5 kN capacity holder
82-P0373 Load cell, 10 kN capacity 82-P0373 Load cell, 10 kN capacity (as 34-T0103/1 Adjustable CBR penetra-
(as alternative) alternative) tion piston
82-P0375/C Adapter to fit load cell 70-T0108/5 Load cell extension 34-T0104/13 Compression device
(two pieces) 70-T0108/7 Flexure testing device for extension
70-T0108/5 Load cell extension soil-cement specimens 34-T0104/10 Compression device
34-T0104/3 Compression platens with 76-B0033/4 Stability mould for dia. 4”
spherical seat (100 mm) specimens (1)
76-B0033/6
320
Indirect tensile on bituminous ROCKS CEMENT, CONCRETE AND Flexural tests on concrete beams,
mixtures All tests are performed under load rate
MASONRY BUILDING UNITS concrete and clay tiles
STANDARD control All tests are performed under load rate STANDARD
control
EN 12697-12 EN 12697-23 EN 12390-5 ▸ EN 491 ▸ EN 538
70
▸ ▸ ▸
Accessories
Accessories
Accessories 82-P0375 Load cell, 50kN capacity Accessories
82-P0375 Load cell, 50kN capacity
82-P0375/C Adapter to fit load cell
82-P0375/C Adapter to fit load cell 82-P0375 Load cell, 50kN capacity 82-P0375 - Load cell, 50kN capacity
(two pieces)
(two pieces) 82-P0375/C Adapter to fit load cell 82-P0375/C – Adapter to fit load cell
34-T0104/10 Loading rod
82-P0322 Displacement transducer (two pieces) (two pieces)
65-L0019/B EN flexure testing device
25mm travel 70-T1180/3 Flexure testing device. 70-T1180/1 – Flexure testing device.
for mortar prisms
34-T0104/81 Adjustable transducer Consisting of a lower beam with two Consisting of a lower beam with two
Or, alternatively:
holder adjustable (from 50 mm to 400 mm) adjustable (from 60 mm to 400 mm)
65-L0019/C ASTM Flexure testing
34-T0104/13 Compression device bearing rollers and a ball seating bearing rollers and un upper loading
device for mortar prisms
extension upper beam with two adjustable (from roller for centre point testing.
34-T0104/10 Compression device 50 mm to 150 mm) loading rollers, Rollers: dia.40 x 210 mm, rocker type
76-B0078/F Frame for tensile splitting one of each can be removed and (except one which is fixed).
Compression on low strength
device placed in the middle for centre point
mortar mixes
76-B0078/F1 Pair of loading strips for testing. Note: for concrete and clay tiles testing
100 mm dia. sample Rollers: dia. 26 x 160 mm, rocker type STANDARD wooden bearers, conforming to the shape of
76-B0078/F2 Pair of loading strips for (except one which is fixed). ▸ EN 196-1 ▸ ASTM C109 tiles, shall be provided by the users.
150 mm dia. sample Bearers with increased length available on
76-B0078/F3 Pair of loading strips for Note: load cells with small capacities may be request
160 mm dia. sample more suitable for low strength materials.
82-P0370, 2.5 kN model is available and can Punching and bending test on clay
Interlayer bonding / Shear bond be used instead of 82-P0375. and concrete blocks for flooring
test (Leutner test)
Splitting tensile test of intact core STANDARD
STANDARD specimens ▸ UNI 9730-3 ▸ EN 15037-2
▸ EN 12697-48 ▸ EN 15037-3
STANDARD
▸ ASTM D3967 ▸ ISRM
Accessories
82-P0375 Load cell, 50kN capacity
82-P0375/C Adapter to fit load cell
(two pieces)
34-T0104/10 Loading rod
Accessories 50-C9030 EN Compression device to
82-P0375 Load cell 50 kN capacity test portions of 40x40x160 mm mortar
82-P0375/C Adapter to fit load cell prism broken in flexure. Accessories
Accessories
(two pieces) Or, alternatively: 82-P0375 - Load cell, 50kN capacity
82-P0375 Load cell, 50kN capacity 50-C9032 ASTM Compression device
82-P0322 Displacement transducer, 82-P0375/C - Adapter to fit load cell
82-P0375/C Adapter to fit load cell for mortar cubes
25mm travel (two pieces)
(two pieces)
34-T0104/81 Adjustable transducer 70-T1180/6 - Punching and bending
34-T0104/10 Loading rod Tensile test of cement briquettes
holder test device. Consisting of two adju-
50-D9032/H Compression/splitting
34-T0104/13 Compression device stable bearing rollers (from 150 mm to
Device
extension Accessories 500 mm), an upper wooden puncher
Or, alternatively:
34-T0104/10 Compression device 82-P0375 Load cell, 50kN capacity 50 x 50 mm and a central loading
45-D9032/NX Compression device for
76-B0033/E Shear bond test appara- 82-P0375/C Adapter to fit load cell device having 20 mm width x 310
indirect tensile test on rock specimens
tus, 150mm (two pieces) mm length. Rollers: dia. 20 x 310 mm,
NX type (dia. 54.74 mm). Conforming
76-B0033/E1 Adapter to test 100mm 65-L0015/6 Tensile testing attachment rocker type (except one which is fixed).
to ISRM specifications.
dia. samples with shear bond test for cement briquette specimens. Not suitable for model 70-T1082.
apparatus 76-B0033/E 321