Professional Documents
Culture Documents
ME8682 - D & F SECOND Final
ME8682 - D & F SECOND Final
ME8682 - D & F SECOND Final
Version: MAMCET_PR-1.1
Abstract
• Biomass stoves burn compressed wood or biomass pellets to
create a source of heat.
• Biomass stove, which is used for cooking for household, canteen,
hotels etc., In this work a cost effective bio mass stove were
designed in Autodesk inventor 2019.
• Then bill of materials were purchased based on the design
requirements. biomass stove will be fabricated from selection of
refractory material, refractory pit tightly firm with frame.
• Finally, blower unit were attached on the bottom of the stove to
perform burning operation effectively.
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 2
Introduction
❖Biomass cookstove design has been an active field for decades and has
resulted in much progress towards cleaner and more efficient cook stove.
❖Design features that improve performance can come with higher costs
or required specific cooking practices.
❖Assumption that cook stoves with higher performance must require
higher costs,From considering new designs.
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 3
3D MODEL
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 4
BILL OF MATERIAL
2 Cement 1.5 kg
4 Wire mesh 1
5 Air Blower 1
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 5
Flow chart of Steps to carryout the project
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 6
Fabrication Process
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 7
Fabrication Process
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 8
Fabrication Process
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 9
Fabrication Process
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 10
Fabrication Process
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 11
COST ESTIMITATION
S.NO Material COST
TOTAL 1120
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 12
CONCLUSION
• The model was designed on Autodesk inventor 2019 software. After designing of biomass stove
bill of material were prepared and the material procurement were done.
• The project work starts from the fabrication of marking and performing the pockets. Then wire
mesh is placed inside of the chamber.
• Then cement abrasive slurry poured into the container stage by stage. Finally, burner were
fabricated and placed top the bio stove the finished by painting process.
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 13
FUTURE SCOPE
• Future scope of this project work were controller for blower will be added for controlling air
blowing to the burner. Experimental work will be calculated such as efficiency of bio mass stove,
Thermal conductivity analysis.
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 14
Bibliography
1. This process is adapted from the International Development Design Summit (IDDS, www. idin.org/idds) curriculum. A comprehensive design workbook with tools and
templates is available online at: http://www.idin.org/resources/curriculum/idds-design-notebook
2. http://cleancookstoves.org/technology-and-fuels/testing/
3. ISO Technical Committee (TC) 285: Clean cookstoves and clean cooking solutions (https://
www.iso.org/committee/4857971.html)
4. http://cleancookstoves.org/technology-and-fuels/testing/centers.html
5. http://cleancookstoves.org/technology-and-fuels/standards/iwa-tiers-of-performance.html
6. We are not sure where the “Fire Triangle” originates, but found several uses of it dating back
7. cleancookstoves.org/technology-and-fuels/stoves
8. http://cleancookstoves.org/research-and-evaluation/market-and-consumer-research
9. http://www.ethoscon.com/wp-content/uploads/2015/04/DOE-Dean-Still-five-Tier-fourstoves-move-toward-the-market.pdf
10. Density, a material property, is the mass per unit volume (e.g., g/L). Materials that are more dense than another substance will sink, and less dense will float.
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 15
Thank You Slide
21-06-2022 Project Work - M.A.M. College of Engineering and Technology, Siruganur, Tiruchirappalli – 621 105. 16