Professional Documents
Culture Documents
Fee A149-4-4185-223-K1450-Hd-Hc (Tajo Abierto)
Fee A149-4-4185-223-K1450-Hd-Hc (Tajo Abierto)
Fee A149-4-4185-223-K1450-Hd-Hc (Tajo Abierto)
Specifications
Max. working pressure 250 bar Max. pump flow (with KO¹) 195 L/min Resulting tipping time (with KO¹) 15 sec
Weight 160 kg Max. pump flow (without KO¹) 137 L/min Resulting tipping time (without KO¹) 21 sec
Working volume 48 L Allowable lowering time 12 sec
Total volume 53 L
KO¹: Hyva pneumatic knock off
Max. cyl. load (start tipping) 245 kN
Extension 1 2 3 4 5 6 7 Total
Effective diameter [mm] 149 129 110 91
Stroke* [mm] 1025 1050 1055 1055 4185
Technical notes
This cylinder is a lifting device only. It should not be used as a structural member and should not be subjected to side loads. When the
cylinder is mounted at an angle, the maximum tipping weight could be reduced. Maximum backwards angle of rotation during operation is 29 deg.
Working pressure depends on the application, but must never exceed the maximum working pressure stated. Working temperature range is
between -40°C and +80°C. Max. duration of extension is 0.5 hours (excluded hard chromed stages). Cylinder is painted black (RAL9005) with a
thickness conforming to the 480 hours neutral salt spray test as per ISO 9227 (ISO10289, rating 9).
Related documentation
Bracket options: 015BRA13 Mounting instructions: CYL-0032 Oil specifications: OIL-0011
Tipping weight
BL body length BL [mm] 5500 5400 5300
OH rear overhang OH [mm] 200 500 800 200 500 800 200 500 800
Ycog vert. pos. centre At [°] 46 49 53 47 50 54 48 51 55
of gravity
Qo pivot length Ycog [mm]
C bracket length 600 47 53 48 55 48 56
At tipping angle 900 52 53
stroke x 60 / Qo 1200
Tipping weight [ton] at maximum pressure of 250 bar for a vertically mounted cylinder and C is 158 mm
For repair instructions see: CYL-0040. Serial no. is located on type plate and near type plate support.
Subject to change without notice, no rights reserved Page 2/2 DO-E 70565273 / 2017-2-9 / RV AA