Professional Documents
Culture Documents
Info Extra Atec (Modo de Compatibilidad)
Info Extra Atec (Modo de Compatibilidad)
Info Extra Atec (Modo de Compatibilidad)
Name Plate
Main body, Solenoides and Cover
Internal wiring harnesses
CEC 2 components
Speed Sensors
1 Mode on Indicator 1
2
2 Mode Button
3 Range Selected 3
4 Display Mode
4
Reading failure codes
Press 4
momentarily; 1
d-1-X-X-X-X
Press 2; 2
d-2-X-X-X-X
Press 2:
d-3-X-X-X-X 3
Press 2;
d-4-X-X-X-X
Press 2;
d-5-X-X-X-X
4
Mode on indicates
active code.
Clearing failure codes
! RET
Allison Tansmission recommends only fluids meeting Allison C-4 specification for use in
5/6/8/9000 series transmissions. The current C-4 fluids approved by Allison are listed in bulletin
GN3465EN available via www.allisontransmission.com. Before using any fluid, check that it is listed in the C-4
approved Fluids List.
Higher viscosity fluids, such as SAE 30W or SAE 15W-40 oils are recommended for
optimum transmission life.
7/15-20 StraightThread
O-ring SAE 4
Lube Pressure
Communication Interface
SAE J1939 Interface
• SEM Calibration
• Auto Retarder on at 2400 RPM
• Normal Downshifts
Allison Transmission CEC2 Vehicle Interface
Input Functions
53. Delta-P Hold
Input Functions
1. Secondary Shift Schedule
Input Functions
8. Hold In Range
FUNCTION IS ACTIVATED WHEN SWITCH IS DEPRESSED.
FUNCTION IS DE-ACTIVATED WHEN SWITCH IS RELEASED.
Input Functions
11. Stall Check
Input Functions
17. Neutral to Range Inhibit
Input Functions
34. Retarder Enable
Input Functions
55. Manual Mode
Input Functions
56. Bed Hoist Interlock
Output Functions
1. Lockup Indicator
Output Functions
4. Range Commanded Indicator
Output Functions
5. Output Speed Indicator-A
Output Functions
7. Engine Overspeed Indicator
Output Functions
16. Secondary Mode Indicator