Professional Documents
Culture Documents
Tubes and Fittings Specs
Tubes and Fittings Specs
Supplier main scaffolding material provided under the Proposal shall have the
specifications provided below:
Sloping Support Components Bracing Components Pressed Swivel Coupler
Cuplok’s very high loading capacity can The unique Cuplok Joint is exception- Swivel Coupler’s connects two scaffold
be fully utilized in access solution, support ally strong. Some additional bracing is and tubes at any angle to provide ledger,
of bridges, water towers, or other applica- required to develop the maximum load façade or similar bracing. These are also
tions where heavy loads require support capacity and to prevent horizontal move- key components in the structure and
at any height. ment. A range of braces is available to suit must be load bearing. The body is firmly
all loading conditions, scaffold tube and riveted to permit rotation but still ensures
Standard components are used, the brac- fittings are used to provide this bracing. the minimum of further movement, for
ing required being provided by tube and maximum rigidity again. The T-bolts can
fittings whilst the standard bases and fork- Scaffold Tube be removed for maintenance.
heads are needed for all normal work, All tubes supplied by SGB conform to
special rocking bases and rocking fork- “BRITISH STANDARD”, BS 1139. The tubes Code Weight (kg) SWL (kN)
heads are available to cater for sloping are available in various lengths, 48.3mm 006200 1.02 6.25
ground conditions or sloping formwork, Dia (outside) 3.20mm wall thickness. Also
saving considerable labor cost in trying to available in 4.00mm wall thickness, color:
accommodate the normal fix items using Galvanized
wedges.
Code Weight (kg)
Rocking Base Plate 001200 4.6
Provides a firm base on ground sloping
up to 60 degrees to the horizontal, safe
working load is 40 kN. Normally fixed to
timbers which spread the load safety to
ground.
Code Description
009101 Podger
009103 Box Spanner (7/12”) s/over
009107 Box Spanner (7/16”) s/over
DH Coupler
This coupler designed to secure putlogs
and transoms to ledgers. This is a
particularly strong design and is in fact
capable of taking much higher loadings
the normal putlog couplers, making it
suitable for ledger bracing etc.