Download as pdf
Download as pdf
You are on page 1of 1
DOCUMENT Cope | SAF-wP-OMS-006 | REV. # | 00 [REV.DATE| 15/06/09 | PAGE | 1 of 1 OL WORK PROCEDURE SAFETY UNIT TITLE: MAINTENANCE & CALIBRATION OF EXPLOSIVITY METERS. 1.0 20 3.0 40 40 44 42 43 4a 45 50 6.0 ROUTE PURPOSE : ‘The purpose of this procedure is to run an effective program for the maintenance & calibration of Explosivity Meters at Pakarab plantsite ‘SCOPE: This procedure/guideline applies to all Explosivity Met RESPONSIBILITY ; MANAGEMENT =, 3.0.1 Ensures that all the guidelines given in this procepi PROCEDURE: Intended Use: < Explosivity meter 's a portable gas monitor for monitoring of mixtures of flammable gases or vapours with ambient air in the workplace. Maintenance a. The explosivity meter must be inspected and calibrated after every six months by the Instrument Unit b. The explosivity meters may be referred to the Vendor's representative in Pakistan for repairs on recommendation of Instrument Unit. The Operation Unit Manager will initiate the Manual Request Form for the repair of explosivity from outside agency i., vendor's local representative. SAFETY UNIT 4.3.1 Monitors the compliance of guidelines given in this procedure, 4.3.2 Educate the operation interface in handling the Explosivity Meters safely. 4.3.3 Helps instrument unit in development of setup for calibration of explosivity meters, 4.34 Keeps stock of calibration gas. INSTRUMENT UNIT 4.4.1 Develops a preventive maintenance & calibration schedule for the exp! 44.2 Develops a setup for the calibration of the explosivity meters. OPERATIONS UNIT MANAGERS 4.5.1 Keeps the expiosivity Meters in good and working condition. 4.5.2 Educates employees regarding the use of Explosivity Meters. 4.5.3 Plan training programmes on use of explosivity meters for section operator in collaboration with safety unit 4.5.4 Arrange refresher courses on use of explosivity meters once in a yeer. 45.5 Develops a list of trained explosivity meter performers/operators of their respective area Implement the guidelines given in this procedure. 4.56 Keeps calibration record of explosivity meters. 4.5.7 _ Ensures the compliance of preventive maintenance & calibration schedule, ATTACHMENT None DISTRIBUTION: UM-(Ammonia, Uxibikies Went, CAN, thea, Nitxic Acid NP, PHES © Inskrument) PREPARED BY REVIEWED BY APPROVED BY REFERENCE losivity meters. ORIGINAL WHEN IN RED ‘Abdul Karim Noon Pervaiz Iqbal ‘Qadeer Ahmed Khan Date Desig/Sign. | UM Safety mes PLD>[p.0 15/06/09 15/06/09 2Hpe¢ Ge ae : a

You might also like