Professional Documents
Culture Documents
Steca Solarix PLI: and Example of Application
Steca Solarix PLI: and Example of Application
Inverter/charger
PV modules
Diesel generator
+ -
Battery
2019.11
System voltage 48 V 24 V 12 V
∙ High overload capacity ∙ Graphic LC display and three
Continuous power 5 kW / 5 kVA 2.4 kW / 3 kVA 1 kW / 1.2 kVA
∙ Integrated MPP tracker LEDs show operating states
Power 5 sec. 10 kW / 10 kVA 4.8 kW / 6 kVA 2 kW / 2.4 kVA
∙ Multi-stage charge technology
Max. efficiency sine wave > 93 % > 91 % > 90 %
∙ Monthly equalising charging Operation
Max. efficiency charge controller > 98 % > 95 %
∙ Auxiliary contact for starting a ∙ Simple menu-guided operation Own consumption standby / ON < 15 W / < 50 W < 14 W / < 45 W < 4 W / < 17 W
generator ∙ Button-based programming AC input
∙ Battery type: gel / liquid lead Interfaces Input frequency 40 ... 65 HZ, 50 / 60 Hz (automatic detection)
battery ∙ Current data is output via RS- Max. current on transfer system 40 A 30 A 10 A
programmable
modules, for battery via fuse Certificates
End of charge voltage 54.0 V 27.0 V 13.5 V
∙ Deep discharge protection ∙ CE-compliant
Boost charge voltage 56.4 V 28.2 V 14.1 V
∙ Short-circuit protection for load ∙ RoHS-compliant
Equalisation charge 60.0 V 29.2 V 14.6 V
∙ Reverse current protection at ∙ Manufactured under the terms Set battery type liquid
night of ISO 9001 and ISO 14001 DC input charge controller
all-in-one package. It allows users to supply consumers with 230 V AC Solarix PLI 2400-24) can be switched parallel and/or three-phase. Max. module current 80 A 40 A
power, charges the battery with an integrated MPPT charge controller, Nominal charge power 4800 W 1168 W 550 W
be switched to the public grid. At the same time, the battery can also be Fitting and construction
recharged by either the generator or the grid. Given its very quick swit- Terminal (AC - fine / single wire) 8 mm² - AWG 8
chover time of up to 10 ms and its flexible energy priority selection, the Terminal (PV - fine / single wire) 12 mm² - AWG 6 8 mm² - AWG 8
liably with dual overload capacity. The maximum power point tracker Dimensions (X x Y x Z) 298 x 469 x 130 275 x 385 x 114 mm 243 x 331 x 115 mm
mm
in the integrated charge controller ensures that, even in unfavourable
Weight 11.5 kg 7.6 kg 6.9 kg
lighting conditions, the maximum output is obtained from the PV modu- Cooling principle fan
+ -
les in order to optimally charge the battery and supply the consumers
with power at the same time. Technical data at 25 °C / 77 °F