The DGT transmitter/indicator is a multipurpose weight transmitter for panel mounting that allows direct reading and diagnostics of up to 4 connected load cells. It has an easy-to-use keyboard, LED display, and DIN rail or wall mounting. It supports various interfaces for integration and comes in models with different input/output configurations like RS232/RS485 ports, relay outputs, and optional analog output. It is suitable for applications requiring legal-for-trade certification or high capacity weighing.
The DGT transmitter/indicator is a multipurpose weight transmitter for panel mounting that allows direct reading and diagnostics of up to 4 connected load cells. It has an easy-to-use keyboard, LED display, and DIN rail or wall mounting. It supports various interfaces for integration and comes in models with different input/output configurations like RS232/RS485 ports, relay outputs, and optional analog output. It is suitable for applications requiring legal-for-trade certification or high capacity weighing.
The DGT transmitter/indicator is a multipurpose weight transmitter for panel mounting that allows direct reading and diagnostics of up to 4 connected load cells. It has an easy-to-use keyboard, LED display, and DIN rail or wall mounting. It supports various interfaces for integration and comes in models with different input/output configurations like RS232/RS485 ports, relay outputs, and optional analog output. It is suitable for applications requiring legal-for-trade certification or high capacity weighing.
Multipurpose weight transmiiter for panel mounting on DIN bar. Ideal as 4-channel digital junction box, permitting the direct reading and diagnostics of each connected load cell. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approval is under way.
FEATURES I/O SELECTION
• Easy to use 5-key waterproof keyboard. • RS232/C bidirectional port configurable • Highly efficient red LED display with 6 9-mm digits and 6 for connection with external units. LEDs for showing active functions. • RS485 bi-directional port configurable for PC, PLC. • Case for mounting on DIN bar or on the wall. • Two 0.5A 48 Vac relay outputs (NO or NC) which may • 106 x 90 mm size, 58 mm height be configured as programmable weight thresholds or • Calibration, Set-Up parameters, configurable from keyboard as over/under check. or from PC with DINI TOOLS V.3.1 • 2 configurable optoisolated inputs. • Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d for • MODBUS serial protocol (DGT4, DGT4AN) CE-M approved legal for trade use (not yet available) • With PROFIBUS serial protocol (DGT4PB). • Up to displayable 300.000e for internal factory use. • With 16-bit analogue output 4-20mA / 0-5Vdc / • Up to 3 signal linearisation points 0-10Vdc at choice (DGT4AN) • Internal resolution up to 3.000.000 points • A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect keypad selectable • Manages a scale with 4 channels or a system functions functions with up to 24 cells with digital equalisation • Zeroing • 2 programmable (6 DGT’s in network). • Automatic tare weight thresholds • Connectable with up to 8 analogue load cells with 350 Ohm • Presettable tare • Weight accumulation input resistance. • Printing and/or data • Formula weighing • From 12 Vdc to 24 Vdc power supply. transmission • Counting • Function command • Hold • on/off • Peak models available: DGT4: Standard model with 2 inputs, 2 outputs, 1 RS232 bidirectional port and 1 RS485 bidirectional port 62 45 DGT4AN: Standard model with 2 inputs, 2 outputs, 1 RS232 bidirectional port and 1 RS485 bidirectional port and analogue output 4-20Ma / 0-5 Vdc / 0-10 Vdc 58
DGT4PB: Standard model with 2 inputs, 2 outputs, 1 RS232