Professional Documents
Culture Documents
Electronic Service Information System (ERWIN - ERWIN) 2
Electronic Service Information System (ERWIN - ERWIN) 2
Copyright VW AG
Technical Service Handbook
Brand Model year Sales model Engine code Gearbox code Final drive code
C 2015 % - --- CLH% % %
Note:
The content of this Table does not change, if the only cause for the following revision is the change of the TPI
header data.
Customer statement:
• Engine gets sporadically overheated.
• Coolant warning lamp comes on.
• The text information „Engine overheated“ is displayed.
Service centre findings:
• The fault may not occur during the check at the service workshop.
Technical background
This fault is caused by the deformed sealing ring of the water pump shaft (Fig.1) blocking the movement of the
regulating slider mechanism (Fig.2).
https://erwin.skoda-auto.cz/erwin/rp/CSP/Retail/ELSAPRO/Show# 1/2
14/12/2020 Technical product information 2039483/14
Fig.1 Fig.2
Production change
-
Measure
If you find/verify this fault, replace the coolant pump.
Note:
For this TPI, VIN-specific packages may be available in the package catalogue* in the category “TPI packages”. In
isolated cases the selection of the right package out of several available packages may be required.
*Only available in markets with PPS Online (Package Price System Online).
Parts information
The new coolant pump is to be ordered according to the current ETKA Catalogue.
Number and indexes stated in the ETKA Catalogue are those currently applicable.
Always check the availability of the spare parts before starting the repair.
https://erwin.skoda-auto.cz/erwin/rp/CSP/Retail/ELSAPRO/Show# 2/2