Professional Documents
Culture Documents
Capsule Proposal TIP CAES TESLA
Capsule Proposal TIP CAES TESLA
College/Campus: Department:
Graduate School MITM
Project Title:
Generating electricity through thermal induced pressure in compressed air energy storage using
Tesla turbine generator
Agenda:
/ Climate Change and Diagnosis and Prevention Restructuring Society and
adaptation of Human Diseases and Understanding Culture
Health Status of Vulnerable towards Inclusive Nation
Groups Building
Biodiversity and the Industry Assistance Emerging Technology and
management of the Natural towards Efficient Production Applications to Inclusive
Environment and Achieving Global Nation Building
Standards
Food Safety and Security Cultural Heritage and Education and the
Conservation Pedagogy for the Filipino
Learners
Rationale:
Electricity has been the primary need of the human race since the beginning of its discovery
and development. But our dependence never ceases, and the effort of sustain it has become
a global technology war over the years. As a consequence, global warming apperas imminent
and our move to renewable energy resources in order to protect the future. The utilization of
these commodities was not stable, and the invention of energy storages became the start of
the technological race. Moreoften, the current energy storages were mainly made up of
hazardous chemicals, which eventually turned-out to be the environmental issue for its
production and disposal. It is also susceptible to heat and detoriation. Such problems can be
helped by the use of thermal induced pressure in CAES usiing Tesla Turbine will aid these
concerns.
Objectives:
The major objective of this undertaking is to design and develop a Thermal Induced Pressure
Compressed Air Energy Strage using Tesla turbine as the prime mover. Specifically, it aims to
ascertain the following objectives:
4.2 Cost;
4.4 Maintainability.
The study seeks to answer the need for a thermal-assisted compressed air energy storage
system and the development of the Tesla turbine generator for more reliable and clean
energy of the future.
Research method:
The study will utilize the Hardware Configuration Item (HWCI) Development Life Cycle and
Failure Mode and Element Analysis (FMEA) to design and develop the proposed project.
HWCI is comprised of the following phases, namely; (1) planning and data gathering, (2)
hardware requirement analysis, (3) design phase, (4) fabrication and (5) qualification and
test phase
Expected Output of Research Project:
The expected output of this research project is the complete and functional thermal induced
pressure CAES with Tesla turbine generator
Summary of Budgetary Requirements
Personal Services
Details: Team Leader: Dr Warlito M.
Galita – 6 units deloading
Co-Author: Mr. James Diok
Chiq – P8,000/month
Project Staff: Dr. Allen N.
Maroma – P4,800/month
Estimated Cost: P28,800 (For
project staff only)
Maintenance and other Operating Expenses
Details: See attached sheet
Estimated Cost:
Others (Specify):
Details: See attached sheet
BulSU-OP-URO-01F1
Revision: 0
Page 2 of 5
Estimated Cost:
Grand Total:
Php [….]Php 78,865.00 + 6 units
deloading for faculty researchers
BulSU-OP-URO-01F1
Revision: 0
Page 3 of 5
3. Fabrication of
Tesla Turbine Completed Tesla
Turbine generator, Metal works using
generator, high-
high-pressure tank, cnc laser cutting,
pressure tank,
panel frame and lathe machining,
panel frame and
solar thermal surface grinding,
solar thermal
system. welding and other
system.
necesssary
procedure
4. Assembly of
mechanical and Completed Mechanical ad
circuit sub- modules for the electronic assembly
assembly of the functional of the circuit sub-
project operation of the assemblies and
system modules of the
project
5. Wiring assembly
of the different Finished wiring Interconnection
modules of the procedure to and hardwiring of
project interconnect each each sub-circuit
circuit sub- assembly will be
assembly/module done
of the project
6. Testing and
Continuous testing
troubleshooting of of the project on
the completed Fully functional
various set of
project project that is free
parameters
from defects and
problems
BulSU-OP-URO-01F1
Revision: 0
Page 4 of 5
BulSU-OP-URO-01F1
Revision: 0
Page 5 of 5