BRITISH STANDARD
Non-metallic conduit
fittings for electrical
installations —
Part 5: Specification for rigid conduits,
fittings and boxes of insulating
material
os 24.1000
NO COPYING WITHOUT B61 PERMISSION EXCEIT AS FEMMITIED BY COPYRIGHT LAW
BS 4607-5:
1982+A3:2010
HEM ae fe
SF Ge
TAP OS
ae adeBS 4607-5:1982+A3:2010
‘This British Standard, having
‘heen prepared under the
Alnectian of the Pomer
‘Hlsctrical Engineering
Blapdania Committee, was
published under the autharity
the Board of BST and
tomes into effect on
2a February 1082
w BSE2010
‘The following BST references
slate to the work on thie
standard:
‘Comunitiee reference PEL/AO
Draft fir cominent 6020191 DC
‘oaraoaeaee
ISBN 978 0580 e4358 5
Cooperating organizations
‘The Power lectrical Enginooring Standards Committee, under whose
diroction this British Standard was prepared, consists af representatives from
the following:
Associated Offices Technical Committee
Association of Short Cireuit Testing Authoritios*
British Electrical and Allied Manufacturers’ Association (BEAMA)
British Railways Board
Britiah Steel Corporation
Department of Energy (Electricity)
Electrical Contractors’ Associntion*
Electrical Contractors’ Association of Scotland
Electricity Supply Industry in England and Wales
Energy Industries Council
Era Technology Ltd
Institute of Purchasing and Supply
Institution of Electrical Engineers
Ministry of Defence*
‘National Coal Board
National Economie Development Office
‘Trades Union Congress
‘The organizations marked with an asterisk in the above list, togethar with the
following, were directly represented on the Technical Committee entrusted
with the preparation of this British Standard;
Association of Manufacturers allied to the Electrical and Electronic industry
(BEAMA)
Association of Supervisory and Executive Engineers
British Electrical Systems Association (BEAMA)
Confaderation of British Industry
Electrical Installation Equipment Manufacturers’ Association (BEAMA)
Zine Development Association
Amendments issued since publication
Amd.No. | Dateofissue | Comments
4951 December
1985
478 November
1937
Ag ‘March 2010 | See forewordBS 4607-5:1982+A3:2010
Contents
Cooperating organizations
Foreword
1 Scape!
‘Normative references
2
3 erms and definitions
4 Cenoral requirements
5 BD Clause deleted Gl
6 Conatsuction
T PO Clause deleted Gl
8 FD Clause deleted
9) Clause deleted GL
10 FO Clause deleted Gl
Standard shoot 1 Non-circular conduits
‘Standard sheet 2 Moulded slip type coupler, plain
‘Standard sheet 3 Inspection bends, plain
Standard sheet 4 Inspection sleeve coupler, plain
‘Standard sheet 5 Expansion type coupler, plain
Standard sheet 6 Circular conduit B} boxes
Standard shect 7 Circular conduit P}boxes @, looping
Standard sheet 8 Covers for circular conduit By) boxes @]
Standard sheet 9 Plain entry reducers
Standard sheet 10 Extension rings
Figure 1 — [9 Figure deleted
Figure 2 — Figure deleted (a
Figure 3 — [5 Figure deleted (@]
Page
Inside front caver
wwletmmme ee eele
eovenrsaaneyBS 4607-5:1982+A:2010
Foreword
‘This revision of this Part of this British Standard was prepared by Technical
Committee PEL/213, Cable Management Systems and supersedes the 1982 edition
which is now withdrawn,
‘The 1982 edition applied to conduit, conduit fittings and components made from
suitable insulating material. It specified the requirements for components not of
tubular form, for example, circular fittings and covers and reducers that were not
covered in Part 1. Details were also given of the requirements for rigid conduits
other than those specified in Part 1
‘The title and contents of this edition of Part 6 have been revised to exclude
cireular conduits. Circular conduit fittings have been renamed circular conduit
boxes
‘The format of this edition follows that of those IEC Publications of similar
content and includes standard sheets giving dimensions (metric) of
non-circular conduits, couplers, benda, cireular conduit boxes and other fittings,
Other Parts of this standard are:
— Part 1: Specification for fittings and components of insulating material.
A British Standard does not purport to include all the necessary provisions of a
contract. Users are responsible for its correct application.
Compliance with a British Standard does not confer immunity from
logal obligations.
Summary of pages
‘This document comprises @ front cover, an inside front cover, pages i and ii,
pages 1 to 9, an inside back cover and a back cover.
‘This standard has been updated (see copyright date) and may have had
amendments incorporated. ‘This will be indicated in the amendment table on
the inside front cover.BS 4607-5:19824+A3:2010
1 Scope
) This Part of this British Standard specifies dimensions and requirements for conduit fitting and.
conduit boxes forming part of a conduit system complying with the relevant parts of the BS EN 61386 to
ensure safety and interoperability. €
§2 Normative references
‘The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
BS BN 61986-1, Conduit systems for cable management ~ Part d: General requirements
3 Terms and definitions
31
conduit fitting
device designed to join or torminate one or more components of a conduit aystem, or for them to change
direction
32
conduit box
conduit fitting, with & removable cover, designed to join or terminate one or more components of a conduit
syatom, or for them to change direction
38
component
part of a conduit fitting which may be common to several conduit fittings
§)4 General requirements
In addition to the requirements of this standard, products shall conform to the requirements of
BS EN 61986-1
Dimensions for conduit boxes, conduit fittings and coinponents are shown in the standard sheets as
follows:
Now-circular eonduite sheet 1
‘Moulded slip type couple, plain sheet 2
Trpecthon bends, plain sheet
Inspection aleove coupler, plain wheat 4
pansion type coupler, plain sheet
Crear conduit (5) boxes sheat 6
Cireular conduit [Bose Gl Ioaping sheet 7
Covers for circular conduit fttinge beat 8
Plain entry reducers heat ®
ater tinge sheet 10
Compliance [2 shall be GJ checked by measurement.
5 BD Clause deletedBS 4607-
1982+A3:2010
6 Construction
9 The lugs and fixing threads of fittings detailed in standard sheets 6, 7 and 10 shall have a minimum
threaded length of 8 mm in the plastics material, Metal inserts, when provided, shall allow a threaded
engagement of not less than three full threads,
Compliance shall be checked by measurement and inspection.
7 FD Clause deleted Cal
8 BD Clause deleted
9 FD Clause deleted (A
10 FD Clause deleted Cl
Standard sheet 1
Non-cireular conduits
a
age
ae
4
All dimeosiona Meenas
NOTE 1 The matali inmlaing mata
Nemlaal ive a &
if a] ea
16 isa} +0 aa | +0
20 zag | 2 Jara | —9%
26 wr Vso [BY ao
22 az6 J “oa |i14 | “02s
‘NOTE ~The preferred manufaetaring Tength la frm, Other wine
nen-ccular condulia are tinder cone deratlee,BS 4607-5:1982+A3:2010
Standard sheet 2
‘Moulded slip type coupler, plain
All dimensona are i mllisnetres,
NOTE Tae material is intulating material
i
tT
15 minimum
Nominalaize] Dyed, ana Aman
16 185 165 1s
20 416 20.8 185
25 51.6 25.4 23.5
a2 85.5 92.4 30.5
Standard sheet 3
Inspection bends, plain
ATL dimensions ane in milimetes,
NOTE. This drawing does not purport te show constructional detale. The crv i ta he mecured tothe body by mechanical means.
‘The material is inaulting material
Nondinaleie | Zain Raia Tyais | Grin. | Tymin longthof | d max Tam
catny
16 aT EG iz Le 16 15
20 ag aa 1“ 15 20 20.8
25 81 52 19 2.0 5 254BS 4607-5:1982+A3:2010
Standard sheet 4
Inspection sleeve coupler, plain
Xe 45 min
All dimensions ane in milimetres,
NOTE This drawing does nat parzort ta show constructional devil, The dover is tae wecured to Ube body by mechanical meas
‘The material ia inoulating material
Nominalaize | Tq mins Tamia] quia length | fy min, aaa
of entry
16 aT iz Té 76 Teo
20 140 1“ 20 82 20.3
25 165 19 25 95 254
a2 228 25 a2 146 32.4BS 4607-
1YSZ+A3:2010
Standard sheet 5
Expansion type coupler, plain
ts
‘All dimensions are ie mullimetees,
NOTE The material la lasulating eiatectl
‘Nominal eine Tmin. Tamia. leagth of | dk mic Toma
enley
16 ccs 16 16.3
20 101 20
25 114 25 254
a2 197 92 92.4BS 4607-5:1982+A5:2010
Standard sheet 6
Circular conduit [9 boxes
2accew holes Mh to
‘accept 1Omm tength
of screw Mota) insorts
mny be fitted pty
\ 4
a KA ‘Spots may_be
at inlegrat or Fife
A jp
p50e20.25 1 ¥
_fsing centres i
64.4 nin
Hotes may. be
Provision shall
be made far
‘on earthing
terminal
tay or Book
Through Angle fas or tee intersection ‘outlet
@) Gp dep Gp (7
Thraugh and Angle ond Bor fee Seay and BG.or Tangent
nck cuter 0 ard 80 niersecton ond BG angie
let eet Branch 3 Brerch Tuan thysut
through 3a wayocU waporY way or
All dimensions are in millimetres,
NOTE. This drawing doce not purpitt ta show constructional detale. The materiel la insulating material
‘Nowiinal lea Tyas Tain aa engl ot Tae Temas
16 386 145 18 163 145
2 386 145 2 20.5 185
ws Sis 159 ws WA 335Standard sheet 7
Cireular conduit [9 boxes @, looping
Pscrew holes M4 to
‘accept 10 mm length
of screw. Metal inserts
may be fitted
gsoaeo25
fixing centres
Holes may be
;
foes or trou sua fr
‘6. 20 cnt (eran “23)
All dimension nee i sTestiee
26 6 min,
a
Diarked off
|Pere mn
vat
Section YY
NOTE This drawing dots not purport to shaw constructional detaila The materia] is insulating material,
Standard sheet 8
Covers for circular conduit FD boxes @
Psnaz025
fixing centres
2 screw clearance
rotes
‘All dimensions are in milimetren.
Smin,
NOTE This drawing dacs noe purport to shaw constructional detaile The materia] ia inwulating material
type of cover Fin
[Sindud ~*~
Overlapping 85BS 4607-5:1982+A3:2010
Standard sheet 9
Plain entry reducers
4,| a
1 nn sn intr
NOTE, The teal a inaating mesial
omnes iain [tami a mas
2 i m0 i6 20 +00 Tas
25 20 25 20 25 -o3 185
a2 2% a 25 a2 +00 236
32 2 @ 2 32 =o 185
Standard sheet 10
Extonsion rings
‘2 screw clearance
holes: Simin,
2acre holes Mb to finan:
occa ten ugh rh |
orate et ers 1
py be ted
1 .,
il ie
Votes ny be
‘psoas! 025 blanked off
Fring centres
All dimensions axe in iillimetres,
NOTR The deawing does net purport ta show constructional detalla. The matectal la insulating matecal.
Ty Ty mia,
nominal sive
15
20 8
25 8
92 8BS 4607-5:1982+A8:2010
Figure 1 — [9 Figure deleted
Figure 2 — F) Figure deleted @
Figure 8 — [Figure deletedBS 4607-5:
1982+A3:2010
BSI
989 Chiswick High Road
London
Wa 4AL
BSI — British Standards Institution
BSI is the independent national body responsible for preparing
British Standards. It presents the UK view on standards in Kurope and at the
international level. It is incorporated by Royal Charter.
Revisions
British Standards are updated by amendment or revision. Users of
British Standarda should make sure that they possess the latest amendments or
editions,
It is the constant aim of BSI to improve the quality of our products and services.
We would be grateful if anyone finding an inaccuracy or ambiguity while using
this British Standard would inform the Secretary of the technical committee
responsible, the identity of which ean be found on the inside front cover.
‘Tel: 020 8996 9000. Fax: 020 8996 7400.
BSI offers members an individual updating service called PLUS which ensures
that subscribers automatically receive the latest editions of standards,
Buying standards
Orders for all BSI, international and foreign standards publications should be
addressed to Customer Services. Tel: 020 8896 9001. Fax: 020 8996 7001.
In response to orders for international standards, it is BSI policy to supply the
BSI implementation of those that have been published as British Standards,
unless otherwise requested.
Information on standards
BSI provides a wide range of information on national, Eurépean and
international standards through its Library and its Technical Help to Exporters
Service. Various BS! electronic information services are also available which give
details on all its products and services. Contact the Information Centre.
‘Tol: 020 8996 7111. Fax: 020 8996 7048,
Subscribing meenbers of BSTare kept up to date with standards developments
and receive substantial discounts on the purchase price of standards. For details
of those and other benefits contact Membership Administration.
"Tol: 020 8996 7002. Fax: 020 8996 7001.
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the
UK, of the publications of the intornationalstandsrdization bodies. Exeopt as
permitted under the Copyright, Designs and Patents Act 1988 no extract may be
reproduced, stored in a retrieval system or transmitted in any form or by any
‘means — electronic, photocopying, recording or otherwise — without prior written
permission from BSL.
‘This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
written permission of BSI must be obtained.
Lf permission is granted, the terms may include royalty payments or a licensing
agreement. Details and advice can be obtained from the Copyright Manager.
‘Tol: 020 8896 7070.