This mechanical data sheet provides specifications for a foam pump for a methanol storage facility project in Bontang, East Kalimantan. The pump is centrifugal and horizontal, with two 100% pumps required (one running and one on standby). Each pump has a capacity of 35 cubic meters per hour at a discharge pressure of 7.68 barg and operates intermittently at a speed of an unspecified RPM. The pumped fluid is AR-AFFF and the site is outdoors with ambient temperatures ranging from 20 to 30 degrees Celsius.
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines
This mechanical data sheet provides specifications for a foam pump for a methanol storage facility project in Bontang, East Kalimantan. The pump is centrifugal and horizontal, with two 100% pumps required (one running and one on standby). Each pump has a capacity of 35 cubic meters per hour at a discharge pressure of 7.68 barg and operates intermittently at a speed of an unspecified RPM. The pumped fluid is AR-AFFF and the site is outdoors with ambient temperatures ranging from 20 to 30 degrees Celsius.
This mechanical data sheet provides specifications for a foam pump for a methanol storage facility project in Bontang, East Kalimantan. The pump is centrifugal and horizontal, with two 100% pumps required (one running and one on standby). Each pump has a capacity of 35 cubic meters per hour at a discharge pressure of 7.68 barg and operates intermittently at a speed of an unspecified RPM. The pumped fluid is AR-AFFF and the site is outdoors with ambient temperatures ranging from 20 to 30 degrees Celsius.
This mechanical data sheet provides specifications for a foam pump for a methanol storage facility project in Bontang, East Kalimantan. The pump is centrifugal and horizontal, with two 100% pumps required (one running and one on standby). Each pump has a capacity of 35 cubic meters per hour at a discharge pressure of 7.68 barg and operates intermittently at a speed of an unspecified RPM. The pumped fluid is AR-AFFF and the site is outdoors with ambient temperatures ranging from 20 to 30 degrees Celsius.
Revision No. : - FOAM PUMP Page : - Project Title : Methanol Storage Facility Site Area : Bontang, East Kalimantan Service : Methanol Transfer Pump Data Provided by : Purchaser Supplier Supplier if not by Purchaser 1 GENERAL [NOTE2] REV. 2 PUMP CODE ANSI B37.1 / ISO 5199 PUMP TYPE CENTRIFUGAL HORIZONTAL 3 NO. PUMP REQ: 2 X 100% ( Running 1 Stanby ) PUMP SIZE (*) PUMP MODEL - 4 NUMBER MOTOR DRIVEN: 2 X 100% NUMBER TURBINE DRIVEN: - 5 MOTOR ITEM NUMBER: - TURBINE ITEM NUMBER: - GEARBOX ITEM NUMBER - 6 MOTOR PROVIDED BY: - TURBINE PROVIDE BY: - GEARBOX PROVIDE BY - 7 MOTOR MOUNTED BY: - TURBINE MOUNTED BY: - GEARBOX MOUNTED BY - 8 OPERATING CONDITIONS PERFORMANCE 9 PERFORMANCE CURVE NO: SPEED: - RPM 10 CAPACITY 35 m3/h MEASURED AT CAPY : RATED MAX NORMAL MIN 11 SUCTION PRESSURE: 0.005 barg NPSH REQ'D: m 12 DISCHARGE PRESSURE: 7.68 barg TOTAL DIFFERENTIAL HEAD @ RATED IMPELLER : - m 13 DIFFERENTIAL PRESURE: 7.685 bar MAX. DIFFERENTIAL HEAD @ RATED IMPELLER : - m 14 DIFFERENTIAL HEAD : 76.88 m MINIMUM CONTINUOS FLOW : 15 HYDRAULIC POWER: 7.5 Kw THERMAL: - m3/h STABLE - m3/h 16 NPSH AVAILABLE - m ALLOWABLE OPERATING REGION : - TO - m3/h 17 OPERATING TIME Intermiten BEST EFFICIENCY POINT FOR RATED IMPELLER: - m3/h 18 SUCTION SPECIFIC SPEED, MAXIMUM 1 m/s SUCTION SPECIFIC SPEED: - 19 SYSTEM DESIGN : IMPELLER DIA : RATED : MAX : MIN : - mm 20 STAND ALONE OPERATION PARALLEL OPERATION PUMP RATED POWER: - ° Kw EFFICIENCY - % 21 SERIES OPERATION WITH ITEM NUMBER MAXIMUM POWER @ RATED IMPELLER : - Kw 22 23 SERVICE 24 CONTINUOUS INTERMITTENT : STARTS/DAY 25 SYSTEM CONTROL METHODE: CASE PRESSURE RATING 26 SPEED FLOW LEVEL TEMPERATURE MAX. ALLOWABLE WORKING PRES.: (*) kg/cm2 @ (*) ˚C 27 PRESSURE PIPE FRICTION RESISTANCE ONLY HYDROSTATIC TEST PRESSURE.: (*) kg/cm2 28 PUMPED FLUID SITE CONDITIONS 29 PUMPED FLUID: AR-AFFF LOCATION 30 INDOOR OUTDOOR 31 PUMPING TEMP : 30.25 ˚C ALTITUDE: - m 32 AT DESIGNATED TEMP.: RANGE OF AMBIENT TEMPS.: MIN/MAX.: 20 / 30 ˚C 33 SPECIFIC GRAVITY: 1.020 HAZARDOUS AREA CLASSIFICATION: 34 VAPOR PRESSURE : - bar CL.: I GR.: IIA DIV.: 2 TEMP.: T2 35 VISCOSITY: 0.1471 cst NON HAZARDOUS 36 SPECIFIC HEAT: GENERAL REMARKS 37 INITIAL BOILING POINT: ˚C @ kg/cm2 38 LIQUID TOXIC FLAMABLE 39 OTHER : 40 41 42 CORROSION/ EROSION CAUSED BY: 43 % SOLID: . MAX. PARTICLE SIZE: mm 44 45 46 47 48
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines