ISO TS 2900 Preview

You might also like

Download as pdf
Download as pdf
You are on page 1of 5
DD CEN ISO/TS 29001:2011 Incorporating corrigendum June 2011 Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations s bsi. Making excellence a habit” DD CEN ISO/TS 29001:2011 DRAFT FOR DEVELOPMENT National foreword This Draft for Development is the UK implementation CEN ISO/TS 29001:201 1. It is identical to ISO/TS 29001:2010. It supersedes DD ISO/TS 29001:2019, which is withdrawn. This publication is not to be regarded as a British Standard. FIs being Issued In the Draft for Development series of publications and Is of a provisional nature. It should be applied on this, Provisional basis, so that information and experience of its practical application can be obtained. Comments arising from the use of this Draft for Development are roquosted so that UK experience can be reported to the International organization responsible for Its conversion to ‘an international standard. A review of this publication will be initiated not lator than 3 years after Its publication by the International organization so that a decision can be taken on its status. Notification of the start of the review period will be made in ‘an announcement in the appropriate issue of Update Standards. According to the replies received by the end of the review period, ‘the responsible BSI Committee will decida whether to support tha conversion into an international Standard, to extend the life of the Technical Specification or to withdraw it. Comments should be sent ‘to the Secretary of the responsible BSI Technical Committee at British Standards House, 289 Chiswick High Road, London W4 4AL. ‘The UK participation in Its preparation was antrusted to Technical Committee PSE/17, Materials and equipment for petroleum, petrochemical and natural gas industries. A list of organizations represented on this committee can bo ‘obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract Users are responsible for Its correct application. @ Bs 2011 ISBN 978 0 580 72222 6 ICS 03.120.10; 75.020 ‘This Draft for Development was published under the authority of the Standards Policy and Strategy Committae on 30 September 2010. Amendmants/corrigenda issued since publication Date Text affectad 20 June 2011 This corrigendum renumbers DD ISO/TS 29001:2010 as DD CEN ISO/TS 29001:2011 TECHNICAL SPECIFICATION CEN ISO/TS 29001 SPECIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION February 2011 16S 03, 120.10; 75.020 English Version Petroleum, petrochemical and natural gas industries - Sector- specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001-2010) Ingusies du pil, dea poche gaz nature - Eri, pebochemische und Erigaindistie somo Eagences pourles ofpariomes de fourvure de -rferderangen an Vorteler und Sevcsorpeniszsoren [RGU et de servoss (ISO/TS 20001-2010) (ISO/TS 20001-2010) ‘This Technisal Specsfsation (CENTS) was approved by CENon 27 December 2010 fr prvisional application. ‘The peri of valoty ofthis CENTS i Imted infialy to three years. After two years the members of CEN willbe requested to submit their Comments, paticuatty on the question whether the CEN'TS can be converted into European Standard CEN members ar required to announce te existence ofthis CENTS in the same way 2s for an EN and to make the CENITS avalatie romply at natonal level in an appropriate form. It's permissible to keep conficting nabonal standards in force (n parallel tothe CENTS} Unf the ina decision about he possible conversion ofthe CENTS into an EN reached, CEN members ae the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypnis, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, ireland, lialy, Lava, Lifwan, Luembourg, Malta, Netherlands, Norway, Poland, Portugal. Romana, Slovakia, Slovenia, Span, Sweden, Smtzeriand and United Kingciom. am ‘EUROPEAN COMMITTEE FOR STANDARDIZATION: COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FOR NORMUNG Management Centre: Avenut Mamix 17, 8-400 Brussels ©2011 CEN. Alights of emlotaton in any form and by sny means reserved Ref, No. CENISOTS 200012011: E vwerldnide for CEN natonal Members DD-CEN ISO/TS 29001:2041 CEN ISO/TS 29001:2011 (E) Foreword ‘The text of ISO/TS 28001:2010 has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the Intemational Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 25001-2011 by Technical Committee CENITC 12 “Material, equipment and offshore structures for petroleum, petrochemical and natural gas industries’ the secretariat of which is held by AFNOR. ‘Attention is drawm to the possibility that some of the elements of this document may be the subject of patent rights. CEN [andor CENELEC] shall not be held reeponsible for identifying any or all euch patent right. According to the CEN/CENELEC Intemal Regulations, the national standards organizations of the following countries are bound to announce thi Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Littuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO/TS 29001:2010 has been approved by CEN as a CEN ISO/TS 29001:2011 without any modification, x e150 2011 DD CEN ISO/TS 29001:2011 ‘CEN ISO/TS 29001:2011 (E) ‘General 02 Process approach 03 Relationship with iSO 8004. O4 ‘Compatibility with other management systems. 05 Goal ofthis Technical Specification, Gener: Field of Application — Supplemental. 4 Terms and definitions for the petroleum, petrochemical and natural gas industries. ‘Quality management system: 44 General requirements. 44.4 Qutsourced processes andior services — Supplemental. Documentation requirements. 1 1 2 3. Terms and definitions. 3: 4 Control of document changes — Supplemental .. 4.2.4 Control of records 4244 Control of records — Supplemental 5 Management responsibility. 54 Management commitment. 5.2 Customer focus 53 Quality policy 53.1 Quality policy — Supplemental. 54 Planning. 541 Quality objectives. 54.2 Quality management system plannin: 55 Responsibility, authority and communication .. 55.1 Responsibility and authority 55.2 Management representative.. 55.3 Internal communication.. 62.2 Competence, training and awareness elso201 i

You might also like